On Thu, 25 May 2000, John F Feist wrote about, DSL and DHCPD:
Hello John.
> Greetings folks, just got my dsl connection yesterday and I was
> hoping to port the Linux server, which runs ax25-utils, over to the
> dynamic account. I run RH 6.1 and have the dhcpd installed for the
> second NIC interface, which is configured as the outside interface. I
> have taken a stab at configuring ipchains to masquerade all internal
> machines too that interface. where I am confused, now is where do I put
> in the authentication data for username/password ? I make use of diald
> on another system and have pap-secrets in the /etc/ppp dir. Is there
> such a format for dhcpd (maybe the /etc/dhcpc dir.?). Looking for a
There is no need for passwd's when dhcp is used to configure your interface.
Use /sbin/dhcpcd eth1
To start the process, that should be enough.
The dhcp server should configure your system and add a default route.
> site to help me configure the setup. Someone mentioned one but I lost
> the email. I could use some help as there really is no Gateway to point
> to during the negotiation other than the multicast portion 224.0.0.0.
>
> I have some more work to do on the rc.ipchains script to add the
> slattach port for the Jnos/Tnos application and the 44 domain IP's.
>
> Thank you in advance. Hope to see more amateurs on DSL as time go on.
> 73, John
--
Regards Richard
[EMAIL PROTECTED]
http://people.zeelandnet.nl/pa3gcu/
