On Sun, 09 Jul 2000, Tony Schonfeld wrote about, Re: PLIP and kernel 2.2.10:
> On Sun, 9 Jul 2000, Richard Adams wrote:
>
> > On Sun, 09 Jul 2000, Tony Schonfeld wrote about, Re: PLIP and kernel 2.2.10:
> >
> > > can't locate module parport_lowlevel
> >
> > This is possably one if not the whole problem, i presume you have a custom
> > compiled kernel. ????
> >
> > Check /usr/src/linux/.config for PARPORT and PLIP.
>
> Parport module is load
>
> >
> > >
> > > my conf.modules is
> > >
> > > alias char-major-4 serial
> > > alias char-major-5 serial
> > > alias char-major-6 lp
> > >
> > > options plip io=0x378 irq=7
> >
> > I think maybe the following "might help"
> >
> > alias parport_lowlevel parport_pc
> > options parport_pc io=0x378,0x278 irq=7,auto
> >
>
> Yes i use these lines
Are you sure, your conf.modules says otherwise.!!!!
> irq 7 is free here.
Then something is really wrong, it should say otherwise if all modules are
loaded for parport and plip.
>
> I think it's may be a problem in kernel 2.2.12
> i hope to upgrade my kernel
I doubt it, if i remember correctly i use PLIP in that kernel but i can
remember for sure.
>
> >
> thanks for comments and help.
> Tony
--
Regards Richard
[EMAIL PROTECTED]
http://people.zeelandnet.nl/pa3gcu/
