Add initial support for Mettler-Toledo Snowflake V2 terminal. The board is using Kontron SL i.MX 8M Mini SoM with 1GB RAM. Supported board features: * 7" Display with touchscreen * RS-232 * I2S Audio * SD-card/eMMC * USB
Changes in v3: - cleanup labels - remove unneeded status entry Changes in v2: - In imx8mm-mt-snowflake-v2: - Reformat with dt-format as suggested by Frank Li - Separate patch for dt-bindings - Add bindings for Mettler-Toledo vendor prefix - Add me as a maintainer for MT device tree files Wojciech Dubowik (4): dt-bindings: vendor-prefixes: Add Mettler-Toledo dt-bindings: arm: fsl: Add Mettler-Toledo Snowflake V2 board arm64: dts: freescale: Add Mettler-Toledo Snowflake V2 support MAINTAINERS: Add entry for METTLER TOLEDO BOARD SUPPORT .../devicetree/bindings/arm/fsl.yaml | 6 +- .../devicetree/bindings/vendor-prefixes.yaml | 2 + MAINTAINERS | 5 + arch/arm64/boot/dts/freescale/Makefile | 1 + .../dts/freescale/imx8mm-mt-snowflake-v2.dts | 482 ++++++++++++++++++ 5 files changed, 494 insertions(+), 2 deletions(-) create mode 100644 arch/arm64/boot/dts/freescale/imx8mm-mt-snowflake-v2.dts -- 2.47.2
