Linux-Hardware Digest #214, Volume #14 Sun, 21 Jan 01 11:13:06 EST
Contents:
ISDN configuration ("Tomas Andersen")
Re: modem drivers (Kevin Krammer)
Re: modem drivers (Arnold Schiller)
Re: Iomega HipZip and Dadio (Joel)
Re: Can anyone pleaseeeeee help me.... ("Tina Carter")
Re: Can anyone pleaseeeeee help me.... ("Tina Carter")
To Linux Nazi ("Tina Carter")
Duron Motherboard (Andy Gombos)
HP 8 GB IDE TAPE AND SCSI EMULATION PROBLEMS (Pete Ritter)
----------------------------------------------------------------------------
From: "Tomas Andersen" <[EMAIL PROTECTED]>
Subject: ISDN configuration
Date: Sun, 21 Jan 2001 14:58:37 GMT
Hi!
I'm having problems configuring my ISDN card. I have installed a
ASUSCOM ISDNlink PCI card. I enclose some information that might
be useful....
I'm grateful for any help..
btw: The 'make xconfig' - "window" shows only ASUSCOM ISDNlink ISA cards..
Is it possible to use this for the PCI card as well?
I read somewhere that the HISax support must be run as a module using PCI
cards of ASUSCOM ISDNlink.
The HiSax module FAILS to install.. Does anyone have some clues??
Thanks in advance
Tomas Andersen
configuration in 'make xconfig'
****************************************************************************
***
ISDN subsystem:
- ISDN support yes
- Support synchronous PPP yes
- Use VJ-compression with syncronous PPP yes
- The rest of the parameters are set to no
ISDN feature submodules
- All parameters are set to no
Passive ISDN cards
- HiSax Siemens ChipSet driver support module
- HiSax Support for EURO/DSS1 yes
- ASUSCOM ISA cards yes
- The rest of the parameters are set to no
Active ISDN cards
- All parameters are set to no
terminal window output when running isdn-config:
****************************************************************************
***
Loading ISDN modules /lib/modules/2.4.0/kernel/drivers/isdn/hisax/hisax.o:
unresolved symbol register_isdn_Rsmp_e38a8833
/lib/modules/2.4.0/kernel/drivers/isdn/hisax/hisax.o: insmod
/lib/modules/2.4.0/kernel/drivers/isdn/hisax/hisax.o failed
/lib/modules/2.4.0/kernel/drivers/isdn/hisax/hisax.o: insmod hisax failed
[FAILED]
Starting isdnlog [ OK ]
Sorry - this system lacks PPP kernel support.
Check whether you configured at least the ippp0 device!
Adding provider 'Tele2' on devive 'ippp0' [ OK ]
[root@localhost /root]# modprobe -a
bash: modprobe: command not found
[root@localhost /root]# /sbin/modprobe -a
modprobe: Nothing to load ???
Specify at least a module or a wildcard like \*
[root@localhost /root]#
/var/log/messages:
****************************************************************************
***
Jan 21 14:45:13 localhost last message repeated 4 times
Jan 21 14:45:13 localhost modprobe: modprobe: Can't locate module
block-major-11
Jan 21 14:45:13 localhost modprobe: modprobe: Can't locate module
block-major-11
Jan 21 14:45:14 localhost modprobe: modprobe: Can't locate module
char-major-45
Jan 21 14:45:14 localhost modprobe:
/lib/modules/2.4.0/kernel/drivers/isdn/hisax/hisax.o: unresolved symbol
register_isdn_Rsmp_e38a8833
Jan 21 14:45:14 localhost modprobe:
/lib/modules/2.4.0/kernel/drivers/isdn/hisax/hisax.o: insmod
/lib/modules/2.4.0/kernel/drivers/isdn/hisax/hisax.o failed
Jan 21 14:45:14 localhost modprobe:
/lib/modules/2.4.0/kernel/drivers/isdn/hisax/hisax.o: insmod hisax failed
Jan 21 14:45:14 localhost isdn: Loading ISDN modules failed
Jan 21 14:45:14 localhost modprobe: modprobe: Can't locate module
char-major-45
Jan 21 14:45:14 localhost modprobe: modprobe: Can't locate module
char-major-45
Jan 21 14:45:14 localhost isdn: isdnlog startup succeeded
Jan 21 14:45:14 localhost modprobe: modprobe: Can't locate module
char-major-45
Jan 21 14:45:14 localhost last message repeated 10 times
Jan 21 14:45:14 localhost modprobe: modprobe: Can't locate module ippp0
Jan 21 14:45:14 localhost last message repeated 3 times
Jan 21 14:45:14 localhost isdn: Adding provider 'Tele2' on devive 'ippp0'
succeeded
Jan 21 14:45:14 localhost modprobe: modprobe: Can't locate module
char-major-45
Jan 21 14:45:14 localhost last message repeated 2 times
Jan 21 14:45:14 localhost modprobe: modprobe: Can't locate module
block-major-11
Jan 21 14:45:14 localhost modprobe: modprobe: Can't locate module
block-major-11
Jan 21 14:45:15 localhost modprobe: modprobe: Can't locate module
char-major-45
Jan 21 14:45:15 localhost last message repeated 4 times
Jan 21 14:45:15 localhost modprobe: modprobe: Can't locate module
block-major-11
Jan 21 14:45:16 localhost modprobe: modprobe: Can't locate module
block-major-11
Jan 21 14:45:16 localhost modprobe: modprobe: Can't locate module
char-major-45
Jan 21 14:45:16 localhost last message repeated 4 times
Jan 21 14:45:17 localhost modprobe: modprobe: Can't locate module
block-major-11
Jan 21 14:45:17 localhost modprobe: modprobe: Can't locate module
block-major-11
Jan 21 14:45:17 localhost modprobe: modprobe: Can't locate module
char-major-45
Jan 21 14:45:17 localhost last message repeated 5 times
------------------------------
From: Kevin Krammer <[EMAIL PROTECTED]>
Subject: Re: modem drivers
Date: Sun, 21 Jan 2001 15:57:04 +0100
Andrew schrieb:
>
> I have this Rockwell HCF 56K modem which isn't currently supported (I
> think). Does anyone know is there is a driver which I can download for
> another modem that might make this thing work?
Hmm, the Rockwell HCF modems seem to be amoung the worst Winmodems. They
get even a bad rating when used with Windows.
According to a winmodem with linux information page
(http://www.kcdata.com/~gromitkc/winmodem.html)
modems with Rockwells HCF chipset do not work with any OS other than
Windows.
Of course this could change in the future (check
http://www.linmodems.org/) but iit would be in any case better to aquire
a real modem. Most (maybe all) serial port modems are full-flegded
modems. Externla modems are preferable anyway, because, additionally to
working with any device capable of using a serial connection, you get
direkt visual feedback on the modem status (control LEDs) and can reset
it manually with out reseting the computer.
cheers,
Kevin
--
"...our continuing mission: to seek out knowledge of C,
to explore strange unix commands, and to boldly code
where no one has man page for."
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Kevin Krammer <[EMAIL PROTECTED]>
Student at Graz University of Technology
http://www.sbox.tu-graz.ac.at/home/v/voyager
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
------------------------------
From: Arnold Schiller <[EMAIL PROTECTED]>
Subject: Re: modem drivers
Date: Sun, 21 Jan 2001 16:22:54 +0100
Reply-To: [EMAIL PROTECTED]
Andrew wrote:
>
> I have this Rockwell HCF 56K modem which isn't currently supported (I
> think). Does anyone know is there is a driver which I can download for
> another modem that might make this thing work?
>
> (and where can I check for driver updates?)
>
> thanks a ton
> [Red Hat 6.2, by the way]
>
> andrew
a start point maybe:
http://www.o2.net/~gromitkc/winmodem.html
but winmodems are not supported with linux
------------------------------
From: Joel <[EMAIL PROTECTED]>
Subject: Re: Iomega HipZip and Dadio
Date: Sun, 21 Jan 2001 15:15:52 GMT
that is of no use
if you botherd to read the post, you would have noticed that he asked if
there was anyway to hook one of theese devices up to linux using usb
i picked up a device off of ebay for $55 made by iomega, which reads
clik disks basicaly using parallel port, (can also convert compact
flash/smart media to clik disks) going to use that on a win machine,
possible to get this goin on linux?
In article <[EMAIL PROTECTED]>,
<[EMAIL PROTECTED]> wrote:
> John Randolph Willey wrote:
> >
> > Does anybody have any advice on connecting an Iomega
HipZip/PocketZip
> > (or Clik! drive or whatever Iomega is calling it this week) to an
Intel
> > Linux machine running RH6? FAQ or How-To? It's a USB device, and I
> > have exactly zero experience trying anything USB on linux.
> >
> > While I'm on the subject, has anybody out there poked around inside
a
> > HipZip mp3 player? This device seems to be running an embedded
> > derivative of Redhat called Dadio. (See http://www.iobjects.com for
> > marketing hype.) It's a flashable OS running on some sort of ARM
chip
> > (Cirrus Logic?) so I'm curious about it. There's supposedly a SDK
> > coming from RedHat.
> >
> > Happy Holidays...
> >
> > John Willey
> >
> > --The operating system is called eCos I know that because my dad
worked
> on it.If you go to the player info and select it. Wait for the Dadio
credit
> to come up then press volume up 7 times followed by select and you
will see
> the credits. It will show the Dadio team, Iomega team, and the eCos
tea
>
> --
> Posted via CNET Help.com
> http://www.help.com/
>
--
____________________________________________
Joel Schuweiler | [EMAIL PROTECTED]
Brats Inc. | was that tux i just ate?
Sent via Deja.com
http://www.deja.com/
------------------------------
From: "Tina Carter" <[EMAIL PROTECTED]>
Subject: Re: Can anyone pleaseeeeee help me....
Date: Sun, 21 Jan 2001 10:31:41 -0500
Didn't ask you to help me but you did BEG us to help you when communism were
eating you upside own, GET A LIFE.....
"Peter T. Breuer" <[EMAIL PROTECTED]> wrote in message
news:[EMAIL PROTECTED]...
> Tina Carter <[EMAIL PROTECTED]> wrote:
> > lie to you, Linux makes me angry. It's program which is not right, maybe
i'm
> > too much windows user but comfort is one thing i look for and it's not
what
> > I'm geting.
>
> Then go look elsewhere. Freedom != comfort. You do it yourself to get
> it the way you want it. If you aren't comfortable, then you take advantage
> of your freedom to change it to suit you or you PAY someone to change it
> for you. Those are your freedoms.
>
> > Worst thing in microsoft is that, they are taking away my freedom :(. In
>
> > now I'm verrrrrry angry I spen 2rn. hours and got nothing done in
linxu :(((((
> > I have no idea how to recompile this stuffff and Corel Linux is
verrrrrry
>
> Bawling like a child isn't going to do it for you. Try learning how to
> do it, then doing it, if that's what turns you on, but distros exist
> precisely so you don't have to do that. When you buy a distro, you buy
> their expertise and efort in putting together binaries for you. You
> don't have to do it yourself.
>
> Peter
------------------------------
From: "Tina Carter" <[EMAIL PROTECTED]>
Subject: Re: Can anyone pleaseeeeee help me....
Date: Sun, 21 Jan 2001 10:34:08 -0500
Thanksssssss
You know, you are the only one who actully tried to tell me in simple words,
HERE PEOPLE TALK LIKE ANIAMLS :(
I got angry when they insulted me microsoft but same food given to them,
they bite like nazi, wonder who was real nazi?.....
Thanks harrrrry
Thank you verrrrry much....
You are verrrry kind...
"Harry George" <[EMAIL PROTECTED]> wrote in message
news:[EMAIL PROTECTED]...
> When I first started in Linux, I was totally confused too. There is
> just too much to understand all at once. Yet, when you do grasp
> what's going on, it is pretty straightforward. So the problem is to
> get you past the initial frustration.
>
> For that, the best bet is to find a Linux user who can sit down with
> you and your system, and get it configured the way you want. A local
> "Linux Users Group" (lug) would be a good bet. Our local chapter has
> a "boot fest" beore each meeting. You bring your system, and the
> whole group helps you get hooked up. Everything from checking
> hardware, to inserting cards, to install, to configuration, to helpful
> hints. If you can't find a LUG, *any* Linux user can probably help
> with this.
>
> At your current level of expertise, I don't think we can do much over
> the newsgroups, without someone at your end physically working with
> you. However, here is a shot:
>
> To install, you (usually) need to be able to run as root. Do you
> remember your root password? (from when you installed the system).
> Generally, you stay away from root as much as possible. But to avoid
> lots of confusion, I'll suggest that this time you do the whole make,
> install, configure as root.
>
> Next, you need to make a place to do compiling. Let's assume you have
> enough room in /usr/local to work:
>
> su - (change to root; it will ask for root password)
> cd /usr/local
> mkdir src (make the "source" dir, if there isn't one already)
> chmod a+rwx src (make it writeable by anyone (not just root))
> mkdir wvdial (make a working dir)
> cd wvdial
>
> Now, copy the wvdial...tar.gz file to here. I'll assume you have
> verison 1.0.0, but use whatever numbers you actually have. And I'll
> assume the wvdial file is at "wherever", but fill that in correctly too:
> cp /wherever/wvdial-1.0.0.tar.gz .
> The "cp" (copy) command copies from somewhere to somewhere. In this
> case, the "to" is the current dir, which is known as ".".
>
> Now, unzip and untar. Here is a command which works on all version of
> gzip and tar:
> gzip -cd wvdial-1.0.0.tar.gz | tar xvf -
> In other words, run Gnu's zip program (gzip) in decompress mode (d),
> to stdout (c), and pipe (|) that to the tar program (tape archive)
> which then extracts (x) verbosely (v) from a file (f) which happens to
> be stdin (-).
>
> The result is a dir, so go into that:
> cd wvdial-1.0.0
> Using your editor, look at the README file. You will find:
> "To build and install WvDial, then:
> make
> make install
> "
>
> Now you are ready to actually use wvdialconf. From the README:.
>
> "The first thing to do is have wvdialconf detect your modem and create
your
> initial configuration. 'su' to root and type the following:
> wvdialconf /etc/wvdial.conf
> "
>
> Except, of course, you are already root, so just run the command.
>
> NOTE:
> I've got a web page on tools you might want to install,
> and the general installation process.
> http://www.seanet.com/~hgg9140/comp/toolkit/index.html
> http://www.seanet.com/~hgg9140/comp/toolkit/doc/install_user.html
>
> Don't bother reading it now, but wen you get more familiar with Linux,
> that is an effective approach to installing lots of "tarballs" (the
> files with ".tar.gz")
>
>
> "Tina Carter" <[EMAIL PROTECTED]> writes:
>
> > There is nothing wrong with my english and spelling is fine expect some
> > error. It's okay for someone to insult Microsoft but not okay when
Microsoft
> > user answer back.
> >
> > I study it for 2 hours and NOT HELPING IT......
> > There is not much to go one.
> > First I got one folder and it has files that's all, There is NOT MUCH
> > information to go on. I think it's just another way to insult since I
answer
> > that microsoft hater but not a single word was said when he was
insulting
> > us....
> > you are right "educated yourself" well u start urself first....
> >
> > BY THE WAY IT'S NOOOOOOT SIMPLE... I TRIED.....
> >
> > "Peter T. Breuer" <[EMAIL PROTECTED]> wrote in message
> > news:[EMAIL PROTECTED]...
> > > Tina Carter <[EMAIL PROTECTED]> wrote:
> > > > Can you plz put in SIMPLE WORDS
> > > > what do I do with this?
> > > > http://www.worldvisions.ca/wvdial/wvdial-1.41.tar.gz
> > >
> > > You extract the contents and read the README. As far as I recall, they
> > > say "type make".
> > >
> > > > In my linux liek zip file it extract a folder and with sub folder
from
> > above
> > > > file
> > > > now what do i do?
> > >
> > > a) learn to write
> > > b) ...
> > >
> > > > I DON'T UNDERSTAND COMPLE AND RECOMPLE :(
> > >
> > > .. learn to spell and buy a dictionary.
> > >
> > > > Please try to tell me in simple words...
> > >
> > > They were simple. It's your problem now to educate yourself.
> > >
> > >
> > > Peter
> >
> >
>
> --
> Harry George
> [EMAIL PROTECTED]
------------------------------
From: "Tina Carter" <[EMAIL PROTECTED]>
Subject: To Linux Nazi
Date: Sun, 21 Jan 2001 10:44:48 -0500
<snap off>Then go look elsewhere. Freedom != comfort. You do it yourself to
get
it the way you want it.
Indeed I am with my freedom comfort.. But it's you who doesn't have any and
force yourself to get
attention. As far as paying goes I'll pay and I'll not pay and there is
nothing you can do about it. So stop
being nazi and racist.
<snap off>If you aren't comfortable, then you take advantage
of your freedom to change it to suit you or you PAY someone to change it
for you. Those are your freedoms.
Is this what you do nazi man. Run away like little rat whenever trouble
arrive? I can say why nazi were
butchering and raping girls. Oh by the way didn't soviet teach you that
lesson since you are in ex soviet
tell me how is Putin treating your SLAVE country with fake freedom.
<snap off>Bawling like a child isn't going to do it for you.
Barking Like rotten animals won't help you nazi. So go back or shut your
racist face, hate Microsoft
and hate color of people is no difference.
<snap off> Try learning how to do it, then doing it, if that's what turns
you on,
What ever is turning you on is nothing more then filth of your sub humanity.
so don't think same work
for everyone nazi man.
<snap off> When you buy a distro, you buy their expertise
Buying and Gain knowledge is two different thing bet nazi didn't teach you
that.
------------------------------
From: Andy Gombos <[EMAIL PROTECTED]>
Subject: Duron Motherboard
Date: Sun, 21 Jan 2001 10:45:53 -0500
For any Duron motherboard, you need VIA 4 in 1 drivers. Are there
versions available for Linux? If not, can I use it with Linux?
Thanks,
Andy
------------------------------
From: Pete Ritter <[EMAIL PROTECTED]>
Subject: HP 8 GB IDE TAPE AND SCSI EMULATION PROBLEMS
Date: Sun, 21 Jan 2001 16:02:18 GMT
This is a multi-part message in MIME format.
==============2B940305A586EDD2CF50415D
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
Please forgive my English; I'm USAian.
Distro: Mandrake 7.2
kernel: 2.2.17-21mdk
Motherboard: PC Chips M805LR, 256MB RAM, 1GHz K7
Tape Drive: HP COLORADO 8GB, ATAPI TAPE drive
Like so many others, I'm having trouble getting my HP IDE tape drive
working. I've tried as a regular IDE device with no luck. Most of the
advice I've seen here suggests to use SCSI emulation. So I reconfigured
the kernel, answering "N" to "Include IDE/ATAPI tape support?" and "Y"
to "SCSI Emulation", "SCSI Support", "SCSI tape support" and "SCSI
generic support", relinked it and now:
# mt -f /dev/st0 rewind
/dev/st0: Input/output error
# mt -v
mt-st v. 0.5b
# tar tvf /dev/st0 /*
tar: /dev/st0: Cannot read: Input/output error
tar: At beginning of tape, quitting now
tar: Error is not recoverable: exiting now
# dmesg
<see attachment>
Can anyone help? Thanks.
--
cpritter
home
com
==============2B940305A586EDD2CF50415D
Content-Type: text/plain; charset=us-ascii;
name="barf"
Content-Transfer-Encoding: 7bit
Content-Disposition: inline;
filename="barf"
Linux version 2.2.17-21mdk ([EMAIL PROTECTED]) (gcc version 2.95.3 19991030
(prerelease)) #5 Tue Jan 16 03:53:13 CST 2001
Detected 1001803 kHz processor.
ide_setup: ide1=autotune
ide_setup: ide0=autotune
Console: colour VGA+ 80x25
Calibrating delay loop... 1998.85 BogoMIPS
Memory: 257476k/262144k available (1104k kernel code, 412k reserved, 3024k data, 128k
init, 0k bigmem)
Dentry hash table entries: 32768 (order 6, 256k)
Buffer cache hash table entries: 262144 (order 8, 1024k)
Page cache hash table entries: 65536 (order 6, 256k)
VFS: Diskquotas version dquot_6.4.0 initialized
CPU: L1 I Cache: 64K L1 D Cache: 64K
CPU: L2 Cache: 256K
CPU: AMD Athlon(tm) Processor stepping 02
Checking 386/387 coupling... OK, FPU using exception 16 error reporting.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.35a (19990819) Richard Gooch ([EMAIL PROTECTED])
PCI: PCI BIOS revision 2.10 entry at 0xfb260, last bus=1
PCI: Using configuration type 1
PCI: Probing PCI hardware
Linux NET4.0 for Linux 2.2
Based upon Swansea University Computer Society NET3.039
NET4: Unix domain sockets 1.0 for Linux NET4.0.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
TCP: Hash tables configured (ehash 262144 bhash 65536)
Initializing RT netlink socket
Starting kswapd v 1.5
Detected PS/2 Mouse Port.
Serial driver version 4.27 with MANY_PORTS MULTIPORT SHARE_IRQ enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
pty: 256 Unix98 ptys configured
apm: BIOS version 1.2 Flags 0x07 (Driver version 1.13)
Real Time Clock Driver v1.09
RAM disk driver initialized: 16 RAM disks of 4096K size
Uniform Multi-Platform E-IDE driver Revision: 6.30
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: IDE controller on PCI bus 00 dev 39
VP_IDE: chipset revision 16
VP_IDE: not 100% native mode: will probe irqs later
Split FIFO Configuration: 8 Primary buffers, threshold = 1/2
8 Second. buffers, threshold = 1/2
ide0: BM-DMA at 0xd000-0xd007, BIOS settings: hda:DMA, hdb:pio
ide0: VIA Bus-Master (U)DMA Timing Config Success
ide1: BM-DMA at 0xd008-0xd00f, BIOS settings: hdc:DMA, hdd:DMA
ide1: VIA Bus-Master (U)DMA Timing Config Success
hda: WDC WD400BB-00AUA1, ATA DISK drive
hdc: HP COLORADO 8GB, ATAPI TAPE drive
hdd: E-IDE CD-ROM CR-856E, ATAPI CDROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: WDC WD400BB-00AUA1, 38166MB w/2048kB Cache, CHS=4865/255/63
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
md driver 0.90.0 MAX_MD_DEVS=256, MAX_REAL=12
raid5: measuring checksumming speed
raid5: MMX detected, trying high-speed MMX checksum routines
pII_mmx : 2326.005 MB/sec
p5_mmx : 2917.317 MB/sec
8regs : 1346.835 MB/sec
32regs : 1181.481 MB/sec
using fastest function: p5_mmx (2917.317 MB/sec)
scsi0 : SCSI host adapter emulation for IDE ATAPI devices
scsi : 1 host.
Vendor: HP Model: COLORADO 8GB Rev: 2.03
Type: Sequential-Access ANSI SCSI revision: 02
Detected scsi tape st0 at scsi0, channel 0, id 0, lun 0
Vendor: E-IDE Model: CD-ROM CR-856E Rev: 1.11
Type: CD-ROM ANSI SCSI revision: 02
scsi : detected 2 SCSI generics 1 SCSI tape total.
md.c: sizeof(mdp_super_t) = 4096
Partition check:
hda: hda1 hda2 < hda5 hda6 hda7 hda8 hda9 hda10 >
autodetecting RAID arrays
autorun ...
... autorun DONE.
VFS: Mounted root (ext2 filesystem) readonly.
Freeing unused kernel memory: 128k freed
Adding Swap: 248968k swap-space (priority -1)
st: bufsize 32768, wrt 30720, max buffers 5, s/g segs 16.
Detected scsi tape st0 at scsi0, channel 0, id 0, lun 0
Unable to get major 9 for SCSI tapes
eth0: 8139too FastEthernet 0.9.9-2.2 Jeff Garzik <[EMAIL PROTECTED]>
eth0: Linux-2.2 bug reports to Jens David <[EMAIL PROTECTED]>
eth0: RealTek RTL8139 Fast Ethernet board found at 0xd086d000, IRQ 11
eth0: Chip is 'RTL-8139C' - MAC address '00:d0:09:72:84:3f'.
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
usb-uhci.c: $Revision: 1.232 $ time 03:59:53 Jan 16 2001
usb-uhci.c: High bandwidth mode enabled
usb-uhci.c: USB UHCI at I/O 0xd400, IRQ 11
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 1
usb.c: USB new device connect, assigned device number 1
hub.c: USB hub found
hub.c: 2 ports detected
/dev/vmmon: Module vmmon: registered with major=10 minor=165 tag=$Name: build-799 $
/dev/vmmon: Module vmmon: initialized
parport0: PC-style at 0x378 [SPP,PS2]
ppuser: User-space parallel port driver
/dev/vmnet: open called by PID 768 (vmnet-bridge)
/dev/vmnet: hub 0 does not exist, allocating memory.
/dev/vmnet: port on hub 0 successfully opened
bridge-eth0: up
bridge-eth0: attached
lp0: using parport0 (polling).
/dev/vmnet: open called by PID 943 (vmnet-netifup)
/dev/vmnet: hub 1 does not exist, allocating memory.
/dev/vmnet: port on hub 1 successfully opened
/dev/vmnet: open called by PID 953 (vmnet-dhcpd)
/dev/vmnet: port on hub 1 successfully opened
VFS: Disk change detected on device ide1(22,64)
ide-scsi: hdd: unsupported command in request queue (0)
end_request: I/O error, dev 16:40 (hdd), sector 64
isofs_read_super: bread failed, dev=16:40, iso_blknum=16, block=32
isapnp: No Plug & Play device found
VFS: Disk change detected on device ide1(22,64)
ide-scsi: hdd: unsupported command in request queue (0)
end_request: I/O error, dev 16:40 (hdd), sector 64
isofs_read_super: bread failed, dev=16:40, iso_blknum=16, block=32
VFS: Disk change detected on device fd(2,0)
end_request: I/O error, dev 02:00 (floppy), sector 0
VFS: Disk change detected on device ide1(22,64)
ide-scsi: hdd: unsupported command in request queue (0)
end_request: I/O error, dev 16:40 (hdd), sector 64
isofs_read_super: bread failed, dev=16:40, iso_blknum=16, block=32
VFS: Disk change detected on device fd(2,0)
end_request: I/O error, dev 02:00 (floppy), sector 0
lp0: using parport0 (polling).
VFS: Disk change detected on device ide1(22,64)
ide-scsi: hdd: unsupported command in request queue (0)
end_request: I/O error, dev 16:40 (hdd), sector 64
isofs_read_super: bread failed, dev=16:40, iso_blknum=16, block=32
VFS: Disk change detected on device fd(2,0)
end_request: I/O error, dev 02:00 (floppy), sector 0
Unable to detect a supported chip!
lp0: using parport0 (polling).
i2c-core.o: i2c core module
i2c-algo-bit.o: i2c bit algorithm module
i2c-elv.o: i2c ELV parallel port adapter module
i2c-core.o: adapter ELV Parallel port adaptor registered as adapter 0.
i2c-elv.o: found device at 0x378.
i2c-viapro.o version 2.5.5 (20010115)
i2c-core.o: adapter SMBus vt82c596 adapter at 5000 registered as adapter 1.
i2c-viapro.o: vt82c596 bus detected and initialized
i2c-dev.o: i2c /dev entries driver module
i2c-core.o: driver i2c-dev dummy driver registered.
i2c-dev.o: Registered 'ELV Parallel port adaptor' as minor 0
i2c-dev.o: Registered 'SMBus vt82c596 adapter at 5000' as minor 1
i2c-isa.o version 2.5.1 (20000618)
i2c-dev.o: Registered 'ISA main adapter' as minor 2
i2c-core.o: adapter ISA main adapter registered as adapter 2.
i2c-isa.o: ISA bus access for i2c modules initialized.
sensors.o version 2.5.1 (20000618)
eeprom.o version 2.5.1 (20000618)
i2c-core.o: driver EEPROM READER registered.
i2c-core.o: client [EEPROM chip] registered to adapter [SMBus vt82c596 adapter at
5000](pos. 0).
i2c-core.o: client [EEPROM chip] registered to adapter [SMBus vt82c596 adapter at
5000](pos. 1).
via686a.o version 2.5.5 (20010115)
i2c-core.o: driver VIA 686A registered.
i2c-core.o: client [Via 686A Integrated Sensors] registered to adapter [ISA main
adapter](pos. 0).
VFS: Disk change detected on device ide1(22,64)
ide-scsi: hdd: unsupported command in request queue (0)
end_request: I/O error, dev 16:40 (hdd), sector 64
isofs_read_super: bread failed, dev=16:40, iso_blknum=16, block=32
VFS: Disk change detected on device fd(2,0)
end_request: I/O error, dev 02:00 (floppy), sector 0
VFS: Disk change detected on device ide1(22,64)
ide-scsi: hdd: unsupported command in request queue (0)
end_request: I/O error, dev 16:40 (hdd), sector 64
isofs_read_super: bread failed, dev=16:40, iso_blknum=16, block=32
VFS: Disk change detected on device fd(2,0)
end_request: I/O error, dev 02:00 (floppy), sector 0
==============2B940305A586EDD2CF50415D==
------------------------------
** FOR YOUR REFERENCE **
The service address, to which questions about the list itself and requests
to be added to or deleted from it should be directed, is:
Internet: [EMAIL PROTECTED]
You can send mail to the entire list by posting to comp.os.linux.hardware.
Linux may be obtained via one of these FTP sites:
ftp.funet.fi pub/Linux
tsx-11.mit.edu pub/linux
sunsite.unc.edu pub/Linux
End of Linux-Hardware Digest
******************************
