Hi Ashish,
Lilo is trying to boot from the wrong partition.
Try to pass root=/dev/hdaX
where X is the device number. Go on trying 1, 2, 3 etc. till you can boot.
Once you boot into linux. Edit lilo.conf to point to the proper device for
booting linux and run
lilo -v.
Now hopefully everything should work.
Regards
Rajesh
At 13:43 17/08/00 IST, you wrote:
>HI !
>I am not able to boot in linux.The booting process stops after giving
>following message
>
> ....autorun done
> attempt to access beyond end of device
> 03:09: rw = 0, want = 2, limit = 0
> dev 03:09 blksize=1024 blocknr=1 sector=2 size 1024 count=1
> EXT2-fs:unable to read superblock
> attempt to access beyond end of device
> 03:09: rw=0 want=33,limit=0
> dev 03:09 blksize=1024 blocknr=32 sector=64 size 1024 count=1
> isofs read_super : bread failed, dev = 03:09,ios_blkcount = 16, block
>= 32
> Kernel panic ; VFS: Unable to mount root fs on 03:09
>What's this problem and what's the way out
>
>Thanks
>
>Ashish
>
Dempo House,
Campal,
Panaji, 403 001
GOA. INDIA.
-----------------------------------
Telephone: 91(832)226281 to 286
Fax: 91(832)225098 / 228588
E-mail: [EMAIL PROTECTED]
URL: http://www.dempos.com
-----------------------------------
----------------------------------------------
LIH is all for free speech. But it was created
for a purpose. Violations of the rules of
this list will result in stern action.
