Thanks Ajay.
>At 17:15 07/09/00 +0530, you wrote:
>>On Thu, 7 Sep 2000, Dempo Mail wrote:
>>
>>> Name: scosysv.1.1.160.in-addr.arpa
>>> Address: 160.1.1.2
>>>
>> This is not correct still. U should always declare full names in
>>reverse lookup zone file. The Name above should be scosysv.edp and not as
>>shown. Write the full names in reverse lookup zone file ending with a (.)
Mistake. Not put a . in reverse lookup. Now working ok.
>> I think the first thing u should do is to setup the networking on
>>ur linux server by defining the scosysv and rajeshpc in
>>/etc/hosts. Disable the named (DNS), and DNS resolution in
>>/etc/resolv.conf and then try to get the network facilities up like telnet
>>to scosysv, and telnet to ur server.
Static IP addresses are working fine. Telnet, ftp etc. are working from
Rajesh PC.
I cannot connect like this to sco since its IP block is 160.1.1... I will
have to change the IP routing table for this. Will do some experimentation
with route and let you know.
>> If nothing works out, change the ip's back to 160.1... and
>>continue. Shouldn't be any problem since no connectivity to internet.
>>But its good if u can follow the standards :-)
If nothing works than this appears to be the best solution to me. I cannot
change the IP of sco here, since the dos nodes who are connected to this
server are given static IP's from this block (160.1.1..). :-)
Regards
Rajesh
Dempo House,
Campal,
Panaji, 403 001
GOA. INDIA.
-----------------------------------
Telephone: 91(832)226281 to 286
Fax: 91(832)225098 / 228588
E-mail: [EMAIL PROTECTED]
URL: http://www.dempos.com
-----------------------------------
----------------------------------------------
LIH is all for free speech. But it was created
for a purpose. Violations of the rules of
this list will result in stern action.
