Hi!
I'm having the same (?) problem with an ericsson SH888 and (unpatched)
linux-2.2.14 with the
'old' ircomm_tty driver.
The problem appears to be that as soon as my computer sends a CONFREQ
ppp packet, my ISP goes
quiet. After a while my ppp daemon dies complaining that the line might
not be 8 bit clean since
all incoming data had bit 7 set to 0.
However, if I configure my pppd to be silent and wait for the first
CONFREQ from the ISP, it will
indeed recieve such a CONFREQ, then transmit a CONFACK and a CONFREQ.
Then the ISP goes quiet again.
The problem seems to be either with the phone or IRDA-link since it
works OK if I change port to a standard modem and try again. Maybe the
outgoing line is not 8 bit clean?
Faxing out from the cell phone using 'sendfax' from the mgetty package
works great.
Any ideas?
/Thomas
Robert Blacquiere wrote:
>
> Hi,
>
> I have a siemens S25 and a toshiba laptop (portege 7020CT).
> I can cu -l /dev/ircomm -s 9600 and can dial but it isn't
> possible to use it with ppp i have used 2.3.7, 2.3.10 and
> 2.3.11 of the ppp package but still no connection. It simply
> dials in connect ppp0 <--> ircomm and then dies after a minute
> or so. It seems the pppd deamon is not aware of the mayby slow
> interface of the irda0. Has any of you had a succesful connection
> with ppp over your mobile phone? It there any information on this
> subject around for some hints to look at? I have succesfully dialed
> with my palm to my provider but never whit ppp over irda.
>
> Greetings
>
> Robert
>
> _______________________________________________
> Linux-IrDA mailing list - [EMAIL PROTECTED]
> http://www4.pasta.cs.UiT.No/mailman/listinfo/linux-irda
--
Thomas Hellstr�m AB Volvo, Technological Development
[EMAIL PROTECTED]
_______________________________________________
Linux-IrDA mailing list - [EMAIL PROTECTED]
http://www4.pasta.cs.UiT.No/mailman/listinfo/linux-irda
