From: Keerthy <[email protected]> Change the parent of apll_pcie_in_clk_mux to dpll_pcie_ref_m2ldo_ck from dpll_pcie_ref_ck.
Figure 26-22. DPLL_PCIE_REF Functional Block Diagram in vE of DRA7xx ES1.0 TRM shows the signal name for the output of post divider (M2) is CLKOUTLDO. Figure 26-21. PCIe PHY Clock Generator Overview shows CLKOUTLDO is used as input to apll mux. So the actual output of dpll is dpll_pcie_ref_m2ldo_ck which is also the input of apll. Cc: Rajendra Nayak <[email protected]> Cc: Tero Kristo <[email protected]> Cc: Paul Walmsley <[email protected]> Signed-off-by: Keerthy <[email protected]> Signed-off-by: Kishon Vijay Abraham I <[email protected]> --- arch/arm/boot/dts/dra7xx-clocks.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/dra7xx-clocks.dtsi b/arch/arm/boot/dts/dra7xx-clocks.dtsi index 7148e7c..f5dca1f 100644 --- a/arch/arm/boot/dts/dra7xx-clocks.dtsi +++ b/arch/arm/boot/dts/dra7xx-clocks.dtsi @@ -1152,7 +1152,7 @@ apll_pcie_in_clk_mux: apll_pcie_in_clk_mux@4ae06118 { compatible = "ti,mux-clock"; - clocks = <&dpll_pcie_ref_ck>, <&pciesref_acs_clk_ck>; + clocks = <&dpll_pcie_ref_m2ldo_ck>, <&pciesref_acs_clk_ck>; #clock-cells = <0>; reg = <0x021c 0x4>; ti,bit-shift = <7>; -- 1.7.9.5 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
