From: Keerthy <[email protected]> Add divider table to optfclk_pciephy_div clock. The 8th bit of CM_CLKMODE_APLL_PCIE can be programmed to either 0x0 or 0x1 based on if the divider value is 0x2 or 0x1.
Figure 26-21. PCIe PHY Clock Generator Overview in vE of DRA7xx ES1.0 shows the block diagram of Clock Generator Subsystem of PCIe PHY module. The divider value if '1' should be programmed in order to get the correct PCIE_PHY_DIV_GCLK frequency (2.5GHz). Cc: Rajendra Nayak <[email protected]> Cc: Tero Kristo <[email protected]> Cc: Paul Walmsley <[email protected]> Signed-off-by: Keerthy <[email protected]> Signed-off-by: Kishon Vijay Abraham I <[email protected]> --- arch/arm/boot/dts/dra7xx-clocks.dtsi | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm/boot/dts/dra7xx-clocks.dtsi b/arch/arm/boot/dts/dra7xx-clocks.dtsi index b03cfe4..7148e7c 100644 --- a/arch/arm/boot/dts/dra7xx-clocks.dtsi +++ b/arch/arm/boot/dts/dra7xx-clocks.dtsi @@ -1170,6 +1170,7 @@ clocks = <&apll_pcie_ck>; #clock-cells = <0>; reg = <0x021c>; + ti,dividers = <2>, <1>; ti,bit-shift = <8>; ti,max-div = <2>; }; -- 1.7.9.5 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
