Linux-Misc Digest #985, Volume #24 Thu, 29 Jun 00 09:13:02 EDT
Contents:
Re: Sendmail with MySQL? (Raymond Doetjes)
Re: .mp3's play choppy. (Dances With Crows)
Re: client in a NT domain (Raymond Doetjes)
Re: Web based room booking system (Raymond Doetjes)
Can't Boot from Compiled Kernel (2.2.13) ("mv")
Re: Find Permission Denied (Dances With Crows)
Re: TABLE.TBL in my own custom Red Hat distro CD (Dances With Crows)
Re: Linux freeze when processing huge files (Joshua Baker-LePain)
Re: gcc --version (Chris Orth)
----------------------------------------------------------------------------
From: Raymond Doetjes <[EMAIL PROTECTED]>
Subject: Re: Sendmail with MySQL?
Date: Thu, 29 Jun 2000 15:09:07 +0200
Why would you wanna do this? The answer is no not standard, you should
start hacking arround the sendmail source your self to accomplish this.
But when you hash the files with.... uhhm i think it was makemap then you
als0 search through a Btree wich is just as fast as through MySQL.
Raymond
Dirk Freese wrote:
> Hi,
>
> is there a way to store the information from virtusertable, etc. in a
> MySQL database?
> I'm urgently looking for a path to achieve this. Can anyone help,please
> ?
>
> Dirk
------------------------------
From: [EMAIL PROTECTED] (Dances With Crows)
Subject: Re: .mp3's play choppy.
Date: 29 Jun 2000 08:15:35 EDT
Reply-To: [EMAIL PROTECTED]
On Wed, 28 Jun 2000 22:42:00 -0500, Nelson Muntz
<<[EMAIL PROTECTED]>> shouted forth into the ether:
[problems with xmms playing very choppily]
>it strats skipping if I as much as move the mouse ...
This is a very bad sign, and could mean any of several things. Is there
an IRQ conflict, or is the sound card using IRQ 0 (otherwise known as
"polling mode"?) It shouldn't be; this will cause performance to degrade
quite a bit. Is the motherboard's L? cache enabled in the BIOS? Turn it
on if it isn't. Does the problem reduce in severity if you increase the
buffering settings in xmms's Preferences (Audio I/O plugin-> Configure
->Buffering)? Do you have a swap partition or swap file enabled? You
really should have one if you don't, general performance will increase a
lot. Do you have the same problem with other MP3 players like mpg123 and
mp3blaster? (search http://freshmeat.net/ for those if you don't have
them already.)
BTW, including the entire text of a previous post *below* a one-line reply
is considered very bad form.
--
Matt G / Dances With Crows /\ "Man could not stare too long at the face
\----[this space for rent]-----/ \ of the Computer or her children and still
\There is no Darkness in Eternity \ remain as Man." --David Zindell "So did
But only Light too dim for us to see\ they become Gods, or Usenetters?" --/me
------------------------------
From: Raymond Doetjes <[EMAIL PROTECTED]>
Subject: Re: client in a NT domain
Date: Thu, 29 Jun 2000 15:14:36 +0200
There is no method to "login" from a linux machine to a PDC and run
logon scripts automatically. Since there is no official
redirector/client for linux.
In this case you should need to distribute scripts via NIS+NFS and when
a user logs in to the box that script should be started via the .bashrc
or .cshrc whatever you use.
Raymond
Natanael wrote:
> Hi!
>
> I have spent this night reading about samba and NT.
>
> I am wondering: how do I automate the NT domain logon and mounting
> shares on the NT? I want to mount NT shares on my linux on startup.
------------------------------
From: Raymond Doetjes <[EMAIL PROTECTED]>
Subject: Re: Web based room booking system
Date: Thu, 29 Jun 2000 15:18:26 +0200
I know a certain company that can build this for you:
http://www.tribute.nl
I don't work there but I know that they are very good in building
database oriented applications, they are located in The Netherlands so
the cost (when you live in the States) are about 250% lower) Since for a
complex website you pay there about $50.000 and here 50.000 guilders but
a dollar is about 2.5 guilders worth.
Raymond
[EMAIL PROTECTED] wrote:
> Hi all,
>
> I am looking for a room booking software that can run on Linux or Sun
> Solaris that has web interface for users to access. Our users want to
> be able to book meeting rooms / conference rooms from their web
> browsers.
>
> If any one knowssuch software either a freeware or with cost, pls let
> me know.
>
> Thanks
>
> ennpee
>
> Sent via Deja.com http://www.deja.com/
> Before you buy.
------------------------------
From: "mv" <[EMAIL PROTECTED]>
Crossposted-To: alt.os.linux.slackware,comp.os.linux.hardware,comp.os.linux.setup
Subject: Can't Boot from Compiled Kernel (2.2.13)
Date: Thu, 29 Jun 2000 07:22:01 -0500
I have been battling a wierd boot problem that has me stumped and wondered
if anyone has a solution for this problem.
The problem is that I can't boot from any kernel that I compile on the PC.
However, I
can boot from the IBMMCA.S kernel that came on the Slackware 7.0
distribution.
The symptoms I am experiencing are that the loader starts displaying the
following line and then stops at a blank line below this when I select one
of my
compiled kernels at boot time:
loading linux................................
If I pick the IBMMCA.S kernel included at installation time, it boots every
time.
I have tried various options in the lilo.conf file with no success. Below
you will find
the current /etc/lilo.conf and /usr/src/linux/.config files.
My normal sequence for compiling the 2.2.13 kernel is:
make dep
make clean
make bzlilo
make modules
make modules_install
Any help you can provide is much appreciated.
============================
/etc/lilo.conf
# LILO configuration file
# generated by 'liloconfig
#
# Start LILO global section
boot = /dev/sda
message = /boot/boot_message.txt
prompt
timeout = 300
# Normal VGA console
vga = normal
linear
append="mem=256M,noinitrd,mca-pentium"
# End LILO global section
# Linux bootable partition config begins
image = /ibmmca
root = /dev/sda2
label = IBMMCA
read-only
# Linux bootable partition config ends
# Linux bootable partition config begins
image = /vmlinuz
root = /dev/sda2
label = Linux
read-only
# Linux bootable partition config ends
==================================
/usr/src/linux/.config
#
# Automatically generated by make menuconfig: don't edit
#
#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
#
# Processor type and features
#
CONFIG_M386=y
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M686 is not set
CONFIG_1GB=y
# CONFIG_2GB is not set
CONFIG_MATH_EMULATION=y
CONFIG_MTRR=y
CONFIG_SMP=y
#
# Loadable module support
#
CONFIG_MODULES=y
CONFIG_MODVERSIONS=y
CONFIG_KMOD=y
#
# General setup
#
CONFIG_NET=y
CONFIG_PCI=y
# CONFIG_PCI_GOBIOS is not set
# CONFIG_PCI_GODIRECT is not set
CONFIG_PCI_GOANY=y
CONFIG_PCI_BIOS=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_QUIRKS=y
# CONFIG_PCI_OPTIMIZE is not set
CONFIG_PCI_OLD_PROC=y
CONFIG_MCA=y
# CONFIG_VISWS is not set
CONFIG_X86_IO_APIC=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_SYSVIPC=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_SYSCTL=y
CONFIG_BINFMT_AOUT=y
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_MISC=m
CONFIG_BINFMT_JAVA=m
CONFIG_PARPORT=m
CONFIG_PARPORT_PC=m
# CONFIG_PARPORT_OTHER is not set
# CONFIG_APM is not set
#
# Plug and Play support
#
CONFIG_PNP=y
CONFIG_PNP_PARPORT=m
#
# Block devices
#
CONFIG_BLK_DEV_FD=y
CONFIG_BLK_DEV_IDE=y
# CONFIG_BLK_DEV_HD_IDE is not set
CONFIG_BLK_DEV_IDEDISK=y
CONFIG_BLK_DEV_IDECD=y
CONFIG_BLK_DEV_IDETAPE=m
CONFIG_BLK_DEV_IDEFLOPPY=y
CONFIG_BLK_DEV_IDESCSI=m
# CONFIG_BLK_DEV_CMD640 is not set
# CONFIG_BLK_DEV_RZ1000 is not set
# CONFIG_BLK_DEV_IDEPCI is not set
CONFIG_IDE_CHIPSETS=y
CONFIG_BLK_DEV_4DRIVES=y
# CONFIG_BLK_DEV_ALI14XX is not set
# CONFIG_BLK_DEV_DTC2278 is not set
# CONFIG_BLK_DEV_HT6560B is not set
# CONFIG_BLK_DEV_QD6580 is not set
# CONFIG_BLK_DEV_UMC8672 is not set
# CONFIG_BLK_DEV_PDC4030 is not set
CONFIG_BLK_DEV_PS2=y
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_NBD=y
CONFIG_BLK_DEV_MD=y
CONFIG_MD_LINEAR=y
CONFIG_MD_STRIPED=y
CONFIG_MD_MIRRORING=m
CONFIG_MD_RAID5=m
CONFIG_MD_BOOT=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_BLK_DEV_XD=m
CONFIG_BLK_DEV_DAC960=m
CONFIG_PARIDE_PARPORT=m
CONFIG_PARIDE=m
CONFIG_PARIDE_PD=m
CONFIG_PARIDE_PCD=m
CONFIG_PARIDE_PF=m
CONFIG_PARIDE_PT=m
CONFIG_PARIDE_PG=m
CONFIG_PARIDE_ATEN=m
CONFIG_PARIDE_BPCK=m
CONFIG_PARIDE_COMM=m
CONFIG_PARIDE_DSTR=m
CONFIG_PARIDE_FIT2=m
CONFIG_PARIDE_FIT3=m
CONFIG_PARIDE_EPAT=m
CONFIG_PARIDE_EPIA=m
CONFIG_PARIDE_FRIQ=m
CONFIG_PARIDE_FRPW=m
CONFIG_PARIDE_KBIC=m
CONFIG_PARIDE_KTTI=m
CONFIG_PARIDE_ON20=m
CONFIG_PARIDE_ON26=m
CONFIG_BLK_CPQ_DA=m
# CONFIG_BLK_DEV_HD is not set
#
# Networking options
#
CONFIG_PACKET=y
CONFIG_NETLINK=y
CONFIG_RTNETLINK=y
CONFIG_NETLINK_DEV=m
CONFIG_FIREWALL=y
CONFIG_FILTER=y
CONFIG_UNIX=y
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
# CONFIG_IP_ADVANCED_ROUTER is not set
# CONFIG_IP_PNP is not set
CONFIG_IP_FIREWALL=y
# CONFIG_IP_FIREWALL_NETLINK is not set
CONFIG_IP_TRANSPARENT_PROXY=y
CONFIG_IP_MASQUERADE=y
CONFIG_IP_MASQUERADE_ICMP=y
CONFIG_IP_MASQUERADE_MOD=y
CONFIG_IP_MASQUERADE_IPAUTOFW=m
CONFIG_IP_MASQUERADE_IPPORTFW=m
CONFIG_IP_MASQUERADE_MFW=m
# CONFIG_IP_ROUTER is not set
CONFIG_NET_IPIP=m
CONFIG_NET_IPGRE=m
# CONFIG_NET_IPGRE_BROADCAST is not set
# CONFIG_IP_MROUTE is not set
# CONFIG_IP_ALIAS is not set
# CONFIG_ARPD is not set
CONFIG_SYN_COOKIES=y
CONFIG_INET_RARP=m
# CONFIG_SKB_LARGE is not set
CONFIG_IPV6=m
CONFIG_IPV6_EUI64=y
CONFIG_IPV6_NO_PB=y
CONFIG_IPX=m
# CONFIG_IPX_INTERN is not set
CONFIG_SPX=m
CONFIG_ATALK=m
CONFIG_X25=m
CONFIG_LAPB=m
# CONFIG_BRIDGE is not set
# CONFIG_LLC is not set
CONFIG_ECONET=m
# CONFIG_ECONET_AUNUDP is not set
# CONFIG_ECONET_NATIVE is not set
CONFIG_WAN_ROUTER=m
# CONFIG_NET_FASTROUTE is not set
# CONFIG_NET_HW_FLOWCONTROL is not set
# CONFIG_CPU_IS_SLOW is not set
#
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
#
# SCSI support
#
CONFIG_SCSI=y
CONFIG_BLK_DEV_SD=y
CONFIG_CHR_DEV_ST=y
CONFIG_BLK_DEV_SR=y
# CONFIG_BLK_DEV_SR_VENDOR is not set
CONFIG_CHR_DEV_SG=y
# CONFIG_SCSI_MULTI_LUN is not set
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_LOGGING=y
#
# SCSI low-level drivers
#
CONFIG_SCSI_7000FASST=m
CONFIG_SCSI_ACARD=m
CONFIG_SCSI_AHA152X=m
CONFIG_SCSI_AHA1542=y
CONFIG_SCSI_AHA1740=m
CONFIG_SCSI_AIC7XXX=m
# CONFIG_AIC7XXX_TCQ_ON_BY_DEFAULT is not set
CONFIG_AIC7XXX_CMDS_PER_DEVICE=8
# CONFIG_AIC7XXX_PROC_STATS is not set
CONFIG_AIC7XXX_RESET_DELAY=5
# CONFIG_SCSI_IPS is not set
CONFIG_SCSI_ADVANSYS=m
CONFIG_SCSI_IN2000=m
CONFIG_SCSI_AM53C974=m
CONFIG_SCSI_MEGARAID=m
CONFIG_SCSI_BUSLOGIC=y
# CONFIG_SCSI_OMIT_FLASHPOINT is not set
CONFIG_SCSI_DTC3280=m
CONFIG_SCSI_EATA=m
# CONFIG_SCSI_EATA_TAGGED_QUEUE is not set
# CONFIG_SCSI_EATA_LINKED_COMMANDS is not set
CONFIG_SCSI_EATA_MAX_TAGS=16
CONFIG_SCSI_EATA_DMA=m
CONFIG_SCSI_EATA_PIO=m
CONFIG_SCSI_FUTURE_DOMAIN=m
CONFIG_SCSI_FD_MCS=y
CONFIG_SCSI_GDTH=m
CONFIG_SCSI_GENERIC_NCR5380=m
CONFIG_SCSI_GENERIC_NCR53C400=y
CONFIG_SCSI_G_NCR5380_PORT=y
# CONFIG_SCSI_G_NCR5380_MEM is not set
CONFIG_SCSI_INITIO=m
CONFIG_SCSI_INIA100=m
CONFIG_SCSI_PPA=m
CONFIG_SCSI_IMM=m
CONFIG_SCSI_IZIP_EPP16=y
# CONFIG_SCSI_IZIP_SLOW_CTR is not set
CONFIG_SCSI_NCR53C406A=m
CONFIG_SCSI_SYM53C416=m
# CONFIG_SCSI_SIM710 is not set
CONFIG_SCSI_NCR53C7xx=y
# CONFIG_SCSI_NCR53C7xx_sync is not set
# CONFIG_SCSI_NCR53C7xx_FAST is not set
# CONFIG_SCSI_NCR53C7xx_DISCONNECT is not set
CONFIG_SCSI_IBMMCA=y
# CONFIG_IBMMCA_SCSI_ORDER_STANDARD is not set
# CONFIG_IBMMCA_SCSI_DEV_RESET is not set
CONFIG_SCSI_MCA_53C9X=y
CONFIG_SCSI_PAS16=m
CONFIG_SCSI_PCI2000=m
CONFIG_SCSI_PCI2220I=m
CONFIG_SCSI_PSI240I=m
CONFIG_SCSI_QLOGIC_FAS=m
CONFIG_SCSI_QLOGIC_ISP=m
CONFIG_SCSI_QLOGIC_FC=m
CONFIG_SCSI_SEAGATE=m
CONFIG_SCSI_DC390T=m
# CONFIG_SCSI_DC390T_NOGENSUPP is not set
CONFIG_SCSI_T128=m
CONFIG_SCSI_U14_34F=m
# CONFIG_SCSI_U14_34F_LINKED_COMMANDS is not set
CONFIG_SCSI_U14_34F_MAX_TAGS=8
CONFIG_SCSI_ULTRASTOR=m
CONFIG_SCSI_DEBUG=m
#
# Network device support
#
CONFIG_NETDEVICES=y
#
# ARCnet devices
#
CONFIG_ARCNET=y
# CONFIG_ARCNET_ETH is not set
# CONFIG_ARCNET_1051 is not set
CONFIG_ARCNET_COM90xx=y
CONFIG_ARCNET_COM90xxIO=m
CONFIG_ARCNET_RIM_I=m
CONFIG_ARCNET_COM20020=m
CONFIG_DUMMY=y
CONFIG_EQUALIZER=m
CONFIG_ETHERTAP=m
CONFIG_NET_SB1000=m
#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
CONFIG_NET_VENDOR_3COM=y
CONFIG_EL1=m
CONFIG_EL2=m
CONFIG_ELPLUS=m
CONFIG_EL16=m
CONFIG_ELMC=y
CONFIG_ELMC_II=y
CONFIG_EL3=y
CONFIG_3C515=m
CONFIG_VORTEX=m
CONFIG_LANCE=m
CONFIG_NET_VENDOR_SMC=y
CONFIG_WD80x3=y
CONFIG_ULTRAMCA=y
CONFIG_ULTRA=m
CONFIG_ULTRA32=m
CONFIG_SMC9194=m
CONFIG_NET_VENDOR_RACAL=y
CONFIG_NI5010=m
CONFIG_NI52=m
CONFIG_NI65=m
CONFIG_RTL8139=m
# CONFIG_SIS900 is not set
CONFIG_YELLOWFIN=m
CONFIG_NET_ISA=y
CONFIG_AT1700=m
CONFIG_E2100=m
CONFIG_DEPCA=m
CONFIG_EWRK3=m
CONFIG_EEXPRESS=m
CONFIG_EEXPRESS_PRO=m
CONFIG_FMV18X=m
CONFIG_HPLAN_PLUS=m
CONFIG_HPLAN=m
CONFIG_HP100=m
CONFIG_ETH16I=m
CONFIG_NE2000=m
CONFIG_SEEQ8005=m
# CONFIG_SK_G16 is not set
CONFIG_NE2_MCA=y
CONFIG_SKMC=y
CONFIG_NET_EISA=y
CONFIG_PCNET32=m
CONFIG_ACENIC=m
CONFIG_AC3200=m
CONFIG_APRICOT=m
CONFIG_CS89x0=m
# CONFIG_DM9102 is not set
CONFIG_DE4X5=m
CONFIG_DEC_ELCP=m
CONFIG_DGRS=m
CONFIG_EEXPRESS_PRO100=m
CONFIG_LNE390=m
CONFIG_NE3210=m
CONFIG_NE2K_PCI=m
CONFIG_TLAN=m
CONFIG_VIA_RHINE=m
CONFIG_ES3210=m
CONFIG_EPIC100=m
# CONFIG_ZNET is not set
CONFIG_NET_POCKET=y
# CONFIG_ATP is not set
CONFIG_DE600=m
CONFIG_DE620=m
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
#
# Appletalk devices
#
CONFIG_LTPC=m
CONFIG_COPS=m
# CONFIG_COPS_DAYNA is not set
# CONFIG_COPS_TANGENT is not set
CONFIG_IPDDP=m
# CONFIG_IPDDP_ENCAP is not set
# CONFIG_IPDDP_DECAP is not set
CONFIG_PLIP=m
CONFIG_PPP=m
CONFIG_SLIP=m
CONFIG_SLIP_COMPRESSED=y
CONFIG_SLIP_SMART=y
# CONFIG_SLIP_MODE_SLIP6 is not set
CONFIG_NET_RADIO=y
CONFIG_STRIP=m
CONFIG_WAVELAN=m
CONFIG_ARLAN=m
#
# Token ring devices
#
CONFIG_TR=y
CONFIG_IBMTR=y
CONFIG_IBMOL=y
CONFIG_SKTR=y
# CONFIG_NET_FC is not set
CONFIG_RCPCI=m
CONFIG_SHAPER=m
#
# Wan interfaces
#
CONFIG_HOSTESS_SV11=m
CONFIG_COSA=m
CONFIG_SEALEVEL_4021=m
CONFIG_DLCI=m
CONFIG_DLCI_COUNT=24
CONFIG_DLCI_MAX=8
CONFIG_SDLA=m
CONFIG_WAN_DRIVERS=y
CONFIG_VENDOR_SANGOMA=m
CONFIG_WANPIPE_CARDS=1
CONFIG_WANPIPE_X25=y
CONFIG_WANPIPE_FR=y
CONFIG_WANPIPE_PPP=y
CONFIG_LAPBETHER=m
CONFIG_X25_ASY=m
# CONFIG_SBNI is not set
#
# Amateur Radio support
#
CONFIG_HAMRADIO=y
CONFIG_AX25=m
CONFIG_AX25_DAMA_SLAVE=y
CONFIG_NETROM=m
CONFIG_ROSE=m
CONFIG_MKISS=m
CONFIG_6PACK=m
CONFIG_BPQETHER=m
CONFIG_DMASCC=m
CONFIG_SCC=m
CONFIG_SCC_DELAY=y
CONFIG_SCC_TRXECHO=y
CONFIG_BAYCOM_SER_FDX=m
CONFIG_BAYCOM_SER_HDX=m
CONFIG_BAYCOM_PAR=m
CONFIG_BAYCOM_EPP=m
CONFIG_SOUNDMODEM=m
CONFIG_SOUNDMODEM_SBC=y
CONFIG_SOUNDMODEM_WSS=y
CONFIG_SOUNDMODEM_AFSK1200=y
CONFIG_SOUNDMODEM_AFSK2400_7=y
CONFIG_SOUNDMODEM_AFSK2400_8=y
CONFIG_SOUNDMODEM_AFSK2666=y
CONFIG_SOUNDMODEM_HAPN4800=y
CONFIG_SOUNDMODEM_PSK4800=y
CONFIG_SOUNDMODEM_FSK9600=y
CONFIG_YAM=m
CONFIG_HFMODEM=m
CONFIG_HFMODEM_SBC=y
CONFIG_HFMODEM_WSS=y
#
# IrDA subsystem support
#
CONFIG_IRDA=m
CONFIG_IRLAN=m
CONFIG_IRCOMM=m
CONFIG_IRLPT=m
CONFIG_IRLPT_CLIENT=m
CONFIG_IRLPT_SERVER=m
# CONFIG_IRDA_OPTIONS is not set
# CONFIG_IRDA_COMPRESSION is not set
#
# Infrared-port device drivers
#
CONFIG_IRTTY_SIR=m
CONFIG_IRPORT_SIR=m
CONFIG_NSC_FIR=m
CONFIG_WINBOND_FIR=m
CONFIG_SHARP_FIR=m
CONFIG_TOSHIBA_FIR=m
CONFIG_SMC_IRCC_FIR=m
CONFIG_DONGLE=y
CONFIG_ESI_DONGLE=m
CONFIG_ACTISYS_DONGLE=m
CONFIG_TEKRAM_DONGLE=m
CONFIG_GIRBIL_DONGLE=m
CONFIG_LITELINK_DONGLE=m
#
# ISDN subsystem
#
CONFIG_ISDN=m
CONFIG_ISDN_PPP=y
CONFIG_ISDN_PPP_VJ=y
CONFIG_ISDN_MPP=y
CONFIG_ISDN_AUDIO=y
# CONFIG_ISDN_TTY_FAX is not set
# CONFIG_ISDN_DIVERSION is not set
CONFIG_ISDN_X25=y
CONFIG_ISDN_DRV_ICN=m
CONFIG_ISDN_DRV_LOOP=m
CONFIG_ISDN_DRV_PCBIT=m
CONFIG_ISDN_DRV_HISAX=m
CONFIG_HISAX_EURO=y
CONFIG_DE_AOC=y
# CONFIG_HISAX_NO_SENDCOMPLETE is not set
# CONFIG_HISAX_NO_LLC is not set
CONFIG_HISAX_1TR6=y
CONFIG_HISAX_16_0=y
CONFIG_HISAX_16_3=y
CONFIG_HISAX_TELESPCI=y
CONFIG_HISAX_S0BOX=y
CONFIG_HISAX_AVM_A1=y
CONFIG_HISAX_FRITZPCI=y
CONFIG_HISAX_AVM_A1_PCMCIA=y
CONFIG_HISAX_ELSA=y
CONFIG_HISAX_IX1MICROR2=y
CONFIG_HISAX_DIEHLDIVA=y
CONFIG_HISAX_ASUSCOM=y
CONFIG_HISAX_TELEINT=y
CONFIG_HISAX_HFCS=y
CONFIG_HISAX_SEDLBAUER=y
CONFIG_HISAX_SPORTSTER=y
CONFIG_HISAX_MIC=y
CONFIG_HISAX_NETJET=y
CONFIG_HISAX_NICCY=y
CONFIG_HISAX_ISURF=y
CONFIG_HISAX_HSTSAPHIR=y
CONFIG_HISAX_BKM_A4T=y
CONFIG_HISAX_SCT_QUADRO=y
CONFIG_HISAX_GAZEL=y
CONFIG_HISAX_HFC_PCI=y
# CONFIG_HISAX_W6692 is not set
CONFIG_ISDN_DRV_SC=m
CONFIG_ISDN_DRV_ACT2000=m
CONFIG_ISDN_DRV_EICON=m
# CONFIG_ISDN_DRV_EICON_ISA is not set
CONFIG_ISDN_DRV_AVMB1=m
CONFIG_ISDN_DRV_AVMB1_B1ISA=y
CONFIG_ISDN_DRV_AVMB1_B1PCI=y
CONFIG_ISDN_DRV_AVMB1_T1ISA=y
CONFIG_ISDN_DRV_AVMB1_B1PCMCIA=y
CONFIG_ISDN_DRV_AVMB1_VERBOSE_REASON=y
#
# Old CD-ROM drivers (not SCSI, not IDE)
#
CONFIG_CD_NO_IDESCSI=y
CONFIG_AZTCD=m
CONFIG_GSCD=m
CONFIG_SBPCD=m
CONFIG_MCD=m
CONFIG_MCD_IRQ=11
CONFIG_MCD_BASE=300
CONFIG_MCDX=m
CONFIG_OPTCD=m
CONFIG_CM206=m
CONFIG_SJCD=m
CONFIG_ISP16_CDI=m
CONFIG_CDU31A=m
CONFIG_CDU535=m
#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_SERIAL=y
CONFIG_SERIAL_CONSOLE=y
CONFIG_SERIAL_EXTENDED=y
CONFIG_SERIAL_MANY_PORTS=y
CONFIG_SERIAL_SHARE_IRQ=y
# CONFIG_SERIAL_DETECT_IRQ is not set
CONFIG_SERIAL_MULTIPORT=y
CONFIG_HUB6=y
CONFIG_SERIAL_NONSTANDARD=y
CONFIG_ROCKETPORT=m
CONFIG_DIGIEPCA=m
CONFIG_CYCLADES=m
# CONFIG_CYZ_INTR is not set
CONFIG_STALDRV=y
CONFIG_STALLION=m
CONFIG_ISTALLION=m
CONFIG_RISCOM8=m
CONFIG_COMPUTONE=m
CONFIG_SPECIALIX=m
# CONFIG_SPECIALIX_RTSCTS is not set
CONFIG_SX=m
CONFIG_ESPSERIAL=m
CONFIG_ISI=m
CONFIG_SYNCLINK=m
CONFIG_N_HDLC=m
CONFIG_UNIX98_PTYS=y
CONFIG_UNIX98_PTY_COUNT=512
CONFIG_PRINTER=m
CONFIG_PRINTER_READBACK=y
CONFIG_MOUSE=y
#
# Mice
#
CONFIG_ATIXL_BUSMOUSE=m
CONFIG_BUSMOUSE=m
CONFIG_MS_BUSMOUSE=m
CONFIG_PSMOUSE=y
CONFIG_82C710_MOUSE=m
CONFIG_PC110_PAD=m
CONFIG_QIC02_TAPE=m
CONFIG_QIC02_DYNCONF=y
CONFIG_WATCHDOG=y
#
# Watchdog Cards
#
# CONFIG_WATCHDOG_NOWAYOUT is not set
CONFIG_WDT=m
CONFIG_WDT_501=y
CONFIG_WDT_501_FAN=y
CONFIG_SOFT_WATCHDOG=m
CONFIG_PCWATCHDOG=m
CONFIG_ACQUIRE_WDT=m
CONFIG_NVRAM=m
CONFIG_RTC=y
#
# Video For Linux
#
CONFIG_VIDEO_DEV=m
CONFIG_RADIO_RTRACK=m
CONFIG_RADIO_RTRACK2=m
CONFIG_RADIO_AZTECH=m
CONFIG_RADIO_CADET=m
CONFIG_RADIO_MIROPCM20=m
CONFIG_RADIO_GEMTEK=m
# CONFIG_RADIO_TRUST is not set
CONFIG_VIDEO_BT848=m
CONFIG_VIDEO_BWQCAM=m
CONFIG_VIDEO_CQCAM=m
CONFIG_VIDEO_PMS=m
CONFIG_VIDEO_SAA5249=m
CONFIG_RADIO_SF16FMI=m
CONFIG_RADIO_TYPHOON=m
CONFIG_RADIO_TYPHOON_PROC_FS=y
CONFIG_RADIO_ZOLTRIX=m
CONFIG_VIDEO_ZORAN=m
CONFIG_VIDEO_BUZ=m
#
# Joystick support
#
CONFIG_JOYSTICK=m
CONFIG_JOY_ANALOG=m
CONFIG_JOY_ASSASIN=m
CONFIG_JOY_GRAVIS=m
CONFIG_JOY_LOGITECH=m
CONFIG_JOY_SIDEWINDER=m
CONFIG_JOY_THRUSTMASTER=m
CONFIG_JOY_LIGHTNING=m
CONFIG_JOY_CONSOLE=m
CONFIG_JOY_DB9=m
CONFIG_JOY_TURBOGRAFX=m
CONFIG_DTLK=m
#
# Ftape, the floppy tape device driver
#
CONFIG_FTAPE=m
CONFIG_ZFTAPE=m
CONFIG_ZFT_DFLT_BLK_SZ=10240
CONFIG_ZFT_COMPRESSOR=m
CONFIG_FT_NR_BUFFERS=3
# CONFIG_FT_PROC_FS is not set
CONFIG_FT_NORMAL_DEBUG=y
# CONFIG_FT_FULL_DEBUG is not set
# CONFIG_FT_NO_TRACE is not set
# CONFIG_FT_NO_TRACE_AT_ALL is not set
CONFIG_FT_STD_FDC=y
# CONFIG_FT_MACH2 is not set
# CONFIG_FT_PROBE_FC10 is not set
# CONFIG_FT_ALT_FDC is not set
CONFIG_FT_FDC_THR=8
CONFIG_FT_FDC_MAX_RATE=2000
CONFIG_FT_ALPHA_CLOCK=0
#
# Filesystems
#
CONFIG_QUOTA=y
CONFIG_AUTOFS_FS=m
CONFIG_ADFS_FS=m
CONFIG_AFFS_FS=m
CONFIG_HFS_FS=m
CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_UMSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
CONFIG_MINIX_FS=y
CONFIG_NTFS_FS=m
# CONFIG_NTFS_RW is not set
CONFIG_HPFS_FS=m
CONFIG_PROC_FS=y
CONFIG_DEVPTS_FS=y
CONFIG_QNX4FS_FS=m
# CONFIG_QNX4FS_RW is not set
CONFIG_ROMFS_FS=m
CONFIG_EXT2_FS=y
CONFIG_SYSV_FS=m
CONFIG_UFS_FS=m
# CONFIG_UFS_FS_WRITE is not set
CONFIG_EFS_FS=m
CONFIG_SGI_PARTITION=y
#
# Network File Systems
#
CONFIG_CODA_FS=m
CONFIG_NFS_FS=y
CONFIG_NFSD=m
# CONFIG_NFSD_SUN is not set
CONFIG_SUNRPC=y
CONFIG_LOCKD=y
CONFIG_SMB_FS=m
CONFIG_NCP_FS=m
# CONFIG_NCPFS_PACKET_SIGNING is not set
# CONFIG_NCPFS_IOCTL_LOCKING is not set
CONFIG_NCPFS_STRONG=y
CONFIG_NCPFS_NFS_NS=y
CONFIG_NCPFS_OS2_NS=y
# CONFIG_NCPFS_SMALLDOS is not set
CONFIG_NCPFS_MOUNT_SUBDIR=y
# CONFIG_NCPFS_NLS is not set
# CONFIG_NCPFS_EXTRAS is not set
#
# Partition Types
#
CONFIG_BSD_DISKLABEL=y
CONFIG_MAC_PARTITION=y
CONFIG_SMD_DISKLABEL=y
CONFIG_SOLARIS_X86_PARTITION=y
CONFIG_UNIXWARE_DISKLABEL=y
CONFIG_AMIGA_PARTITION=y
CONFIG_NLS=y
#
# Native Language Support
#
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_CODEPAGE_737=m
CONFIG_NLS_CODEPAGE_775=m
CONFIG_NLS_CODEPAGE_850=m
CONFIG_NLS_CODEPAGE_852=m
CONFIG_NLS_CODEPAGE_855=m
CONFIG_NLS_CODEPAGE_857=m
CONFIG_NLS_CODEPAGE_860=m
CONFIG_NLS_CODEPAGE_861=m
CONFIG_NLS_CODEPAGE_862=m
CONFIG_NLS_CODEPAGE_863=m
CONFIG_NLS_CODEPAGE_864=m
CONFIG_NLS_CODEPAGE_865=m
CONFIG_NLS_CODEPAGE_866=m
CONFIG_NLS_CODEPAGE_869=m
CONFIG_NLS_CODEPAGE_874=m
CONFIG_NLS_ISO8859_1=y
CONFIG_NLS_ISO8859_2=m
CONFIG_NLS_ISO8859_3=m
CONFIG_NLS_ISO8859_4=m
CONFIG_NLS_ISO8859_5=m
CONFIG_NLS_ISO8859_6=m
CONFIG_NLS_ISO8859_7=m
CONFIG_NLS_ISO8859_8=m
CONFIG_NLS_ISO8859_9=m
CONFIG_NLS_ISO8859_14=m
CONFIG_NLS_ISO8859_15=m
CONFIG_NLS_KOI8_R=m
#
# Console drivers
#
CONFIG_VGA_CONSOLE=y
CONFIG_VIDEO_SELECT=y
# CONFIG_MDA_CONSOLE is not set
CONFIG_FB=y
CONFIG_DUMMY_CONSOLE=y
# CONFIG_FB_PM2 is not set
CONFIG_FB_VESA=y
# CONFIG_FB_VGA16 is not set
CONFIG_VIDEO_SELECT=y
CONFIG_FB_MATROX=m
CONFIG_FB_MATROX_MILLENIUM=y
CONFIG_FB_MATROX_MYSTIQUE=y
CONFIG_FB_MATROX_G100=y
CONFIG_FB_MATROX_MULTIHEAD=y
# CONFIG_FB_ATY is not set
# CONFIG_FB_VIRTUAL is not set
CONFIG_FBCON_ADVANCED=y
CONFIG_FBCON_MFB=m
CONFIG_FBCON_CFB2=m
CONFIG_FBCON_CFB4=m
CONFIG_FBCON_CFB8=y
CONFIG_FBCON_CFB16=y
CONFIG_FBCON_CFB24=y
CONFIG_FBCON_CFB32=y
# CONFIG_FBCON_AFB is not set
# CONFIG_FBCON_ILBM is not set
# CONFIG_FBCON_IPLAN2P2 is not set
# CONFIG_FBCON_IPLAN2P4 is not set
# CONFIG_FBCON_IPLAN2P8 is not set
# CONFIG_FBCON_MAC is not set
# CONFIG_FBCON_VGA_PLANES is not set
CONFIG_FBCON_VGA=y
# CONFIG_FBCON_FONTWIDTH8_ONLY is not set
CONFIG_FBCON_FONTS=y
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
# CONFIG_FONT_SUN8x16 is not set
# CONFIG_FONT_SUN12x22 is not set
# CONFIG_FONT_6x11 is not set
# CONFIG_FONT_PEARL_8x8 is not set
# CONFIG_FONT_ACORN_8x8 is not set
#
# Sound
#
CONFIG_SOUND=m
# CONFIG_SOUND_CMPCI is not set
CONFIG_SOUND_ES1370=m
CONFIG_SOUND_ES1371=m
CONFIG_SOUND_ESSSOLO1=m
CONFIG_SOUND_SONICVIBES=m
CONFIG_SOUND_MSNDCLAS=m
# CONFIG_MSNDCLAS_HAVE_BOOT is not set
CONFIG_MSNDCLAS_INIT_FILE="/etc/sound/msndinit.bin"
CONFIG_MSNDCLAS_PERM_FILE="/etc/sound/msndperm.bin"
CONFIG_SOUND_MSNDPIN=m
# CONFIG_MSNDPIN_HAVE_BOOT is not set
CONFIG_MSNDPIN_INIT_FILE="/etc/sound/pndspini.bin"
CONFIG_MSNDPIN_PERM_FILE="/etc/sound/pndsperm.bin"
CONFIG_SOUND_OSS=m
CONFIG_SOUND_PAS=m
CONFIG_SOUND_SB=m
CONFIG_SOUND_ADLIB=m
CONFIG_SOUND_GUS=m
# CONFIG_GUS16 is not set
# CONFIG_GUSMAX is not set
CONFIG_SOUND_MPU401=m
CONFIG_SOUND_PSS=m
# CONFIG_PSS_MIXER is not set
CONFIG_SOUND_MSS=m
CONFIG_SOUND_SSCAPE=m
CONFIG_SOUND_TRIX=m
# CONFIG_SOUND_VIA82CXXX is not set
CONFIG_SOUND_MAD16=m
# CONFIG_MAD16_OLDCARD is not set
CONFIG_SOUND_WAVEFRONT=m
CONFIG_SOUND_CS4232=m
CONFIG_SOUND_OPL3SA2=m
CONFIG_SOUND_MAUI=m
CONFIG_SOUND_SGALAXY=m
CONFIG_SOUND_AD1816=m
CONFIG_SOUND_OPL3SA1=m
CONFIG_SOUND_SOFTOSS=m
CONFIG_SOUND_YM3812=m
CONFIG_SOUND_VMIDI=m
CONFIG_SOUND_UART6850=m
# CONFIG_SOUND_NM256 is not set
#
# Additional low level sound drivers
#
CONFIG_LOWLEVEL_SOUND=y
CONFIG_ACI_MIXER=m
CONFIG_AWE32_SYNTH=m
CONFIG_AEDSP16=m
CONFIG_AEDSP16_BASE=220
CONFIG_MPU_BASE=330
CONFIG_SC6600=y
CONFIG_SC6600_JOY=y
CONFIG_SC6600_CDROM=4
CONFIG_SC6600_CDROMBASE=0
CONFIG_AEDSP16_SBPRO=y
CONFIG_AEDSP16_BASE=220
CONFIG_AEDSP16_SB_IRQ=5
CONFIG_AEDSP16_SB_DMA=0
CONFIG_AEDSP16_MPU401=y
CONFIG_AEDSP16_MPU_IRQ=0
#
# Kernel hacking
#
# CONFIG_MAGIC_SYSRQ is not set
============================
------------------------------
From: [EMAIL PROTECTED] (Dances With Crows)
Subject: Re: Find Permission Denied
Date: 29 Jun 2000 08:27:10 EDT
Reply-To: [EMAIL PROTECTED]
On Thu, 29 Jun 2000 11:45:44 GMT, [EMAIL PROTECTED]
<<8jfct4$38i$[EMAIL PROTECTED]>> shouted forth into the ether:
>When I execute a find / -name some.file as root, I always get the error
>message: 'find: /proc/5/fd permission denied' whether I find some.file
>or not. Why?
/proc is not a real filesystem; it's a virtual filesystem that's created
on the fly by the kernel in response to requests. /proc/5/ is a virtual
directory that contains information about process 5, which is kswapd on my
machine. kswapd is a kernel thread that handles paging things in/out from
disk, and the file you want is most certainly not in there.
To get rid of the error and make your find command go a little bit faster,
do it like so:
find / -prune /proc -name SOMEFILE
--
Matt G / Dances With Crows /\ "Man could not stare too long at the face
\----[this space for rent]-----/ \ of the Computer or her children and still
\There is no Darkness in Eternity \ remain as Man." --David Zindell "So did
But only Light too dim for us to see\ they become Gods, or Usenetters?" --/me
------------------------------
From: [EMAIL PROTECTED] (Dances With Crows)
Crossposted-To: comp.os.linux.setup,comp.os.linux.x
Subject: Re: TABLE.TBL in my own custom Red Hat distro CD
Date: 29 Jun 2000 08:35:24 EDT
Reply-To: [EMAIL PROTECTED]
On Thu, 29 Jun 2000 16:20:14 +0800, Kheng-Teong Goh
<<[EMAIL PROTECTED]>> shouted forth into the ether:
>This is a multi-part message in MIME format.
Stop that. NOW. Usenet doesn't need silly "vcards" polluting it, and it
doesn't need MIME garbage.
>May I know what is the function of TABLE .TBL in the RPMS folder in Red
>Hat 6.2 cd?
>
>I need to know because I'm removing the packages from my version of Red
>Hat. And I upgraded the kernels rpms.
I think you mean "TRANS.TBL". Did you take a look at it with less? It's
a small text file that's in every directory of most ISO9660 CDs, and its
function is to help systems that don't understand Rock Ridge extensions
map the 8+3 ISO9660 filenames to long filenames. GTK-DE~2.001 becomes
gtk-devel-1.2.7.rpm, for example.
>ps I'm running out of time.
And you expect a quick answer from Usenet?
--
Matt G / Dances With Crows /\ "Man could not stare too long at the face
\----[this space for rent]-----/ \ of the Computer or her children and still
\There is no Darkness in Eternity \ remain as Man." --David Zindell "So did
But only Light too dim for us to see\ they become Gods, or Usenetters?" --/me
------------------------------
From: Joshua Baker-LePain <[EMAIL PROTECTED]>
Subject: Re: Linux freeze when processing huge files
Date: 29 Jun 2000 12:38:29 GMT
Jean-Fran=E7ois Beaumont <[EMAIL PROTECTED]> wrote:
> " When a program is executed, it takes 99% of the cpu (when it is alone)
> and when the program require more than physical memory, swap partion
> is used and the program slow down to 3% of the cpu time. "
> still there and performance of heavy programs (450 megs of RAM and
> more) will run like this for ever because they run too slow.
Well, I suspected this was related, because swapping should be faster and
use less CPU now with DMA enabled. However, given those memory requiremen=
ts
I would definitely buy more RAM. Swapping is *much* slower than memory
access (orders of magnitude slower), and so the process is going to=20
spend more time waiting for data and less time on the CPU. The *only*
way to fix this is to increase your memory so that your whole process fits
in memory (with room left over for OS and other apps). If you've got
processes that need over .5GB of memory, IMHO you need at least 1 GB.
Check your motherboard specs to see how much it can handle, and max it
out. If your motherboard can't handle enough, it's time for a new box.
Dell's Precision Workstations are quite nice...
--=20
Joshua Baker-LePain
Department of Biomedical Engineering
Duke University
------------------------------
From: Chris Orth <[EMAIL PROTECTED]>
Crossposted-To: alt.os.linux
Subject: Re: gcc --version
Date: 29 Jun 2000 12:43:07 GMT
Here are the specifics:
http://www.cygnus.com/egcs (redirects to http://gcc.gnu.org/)
<excerpt>
Welcome to the GCC home page!
In April 1999, the egcs steering committee was appointed by the FSF as the
official GNU maintainer for GCC. At that time GCC was renamed from the "GNU C
Compiler" to the "GNU Compiler Collection".
...
We will provide regular, high quality releases. We want those releases to
work well on a variety of native (including GNU/Linux) and cross targets and
use an extensive test suite as well as a benchmark suite to maintain and
improve quality. GCC 2.95.2 is the current releas
</excerpt>
Chris
In alt.os.linux Fro-Man <[EMAIL PROTECTED]> wrote:
: On Thu, 29 Jun 2000, Dan wrote:
:> Could someone please exand on this? I assume there are differences for an
:> end-user type?
:> Thanks.
: egcs uses the gcc code. However it also expands on the code a little
: bit. I believe it is to make it more optimized for Pentium machines. You
: should read up on it though. From what I can tell from what I have read,
: egcs tends to output faster programs as much as 20%ish if I remember.
: Basically ecgs right now is in the 1.2.2 (I think) and can be base off of
: gcc 2.xx. With a proper patch you can turn gcc into egcs with a
: patch. Read up more on this.
: I;m not sure on the websites for this, butyou could look around yourself
: and find out more about the two different compilers...
: Aaron Day * Do minivans make people bad drivers,
: [EMAIL PROTECTED] * or do bad drivers buy minivans?
: www.csis.gvsu.edu/~daya * -Aaron Day
------------------------------
** FOR YOUR REFERENCE **
The service address, to which questions about the list itself and requests
to be added to or deleted from it should be directed, is:
Internet: [EMAIL PROTECTED]
You can send mail to the entire list (and comp.os.linux.misc) via:
Internet: [EMAIL PROTECTED]
Linux may be obtained via one of these FTP sites:
ftp.funet.fi pub/Linux
tsx-11.mit.edu pub/linux
sunsite.unc.edu pub/Linux
End of Linux-Misc Digest
******************************
