Thank you so much everybody, for helping. I try to use the internet dialup
program that is on the desktop after a RH 7.0 Workstation install, as well
as kppp and two other tools to detect my modem, and they both say that there
is no modem detected.
I typed cat /proc/pci , and here is what I get ( I assume that "unknown
devices" are not supported, and those fully named are?). P.S., how do I
save a file to a floppy with Linux, and can I read this same file with
Windows? My machine is a Linux/Windows dual boot, that's why I ask:
# cat /proc/pci
PCI devices found:
Bus 0, device 0, function 0:
Host bridge: VIA Technologies Unknown device (rev 3).
Vendor id=1106. Device id=305.
Medium devsel. Master Capable. Latency=8.
Prefetchable 32 bit memory at 0xd00000000 [0xd0000008].
Bus 0, device 1, function 0:
Host bridge: VIA Technologies Unknown device (rev 0).
Vendor id=1106. Device id=8305.
Medium devsel. Master Capable. No bursts. Min Gnt=12.
Bus 0, device 7, function 0:
ISA bridge: VIA Technologies Unknown device (rev 64).
Vendor id=1106. Device id=686.
Medium devsel. Master Capable. No bursts.
Bus 0, device 7, function 1:
IDE interface: VIA Technologies VT 82C586 (rev 6).
Medium devsel. Fast back-to-back capable. Master capable. Latency=32.
I/O at 0xa000 [0xa001].
Bus 0, device 7, function 2:
USB controller: VIA Technologies VT 82C586 Apollo USB (rev 22).
Medium devsel. IRQ 9. Master Capable. Latency=32.
I/O at 0xa400 [0xa401].
Bus 0, device 7, function 4:
Bridge: VIA Technologies Unkown device (rev 64).
Vendor id=1106. Device id=3057.
Medium devsel. Fast back-to-back capable.
Bus 0, device 7, function 5:
Multimedia audio controller: VIA Technologies Unknown device (rev 80).
Vendor id=1106. Device id=3058.
Medium devsel. IRQ 5.
I/O at 0xac00 [0xac01].
I/O at 0xb000 [0xb001].
I/O at 0xb400 [0xb401].
Bus 0, device 9, function 0:
Ethernet controller: Realtek 8029 (rev 0).
Medium devsel. IRQ11.
I/O at 0xb800 [0xb801].
Bus 0, device 10, function 0:
Communication controller: Lucent (ex-AT&T) Microelectronics L56DV+P (rev 0).
Medium devsel. Fast back-to-back capable. IRQ 5. Master Capable. No bursts.
Min Gnt=252. Max Lat=14.
Non-prefetchable 32 bit memory at 0xdb0
I/O at 0xc400 [0xc401].
Bus 0, device 11, function 0:
Communication controller: Unknown vendor Unknown device (rev 1).
Vendor id=134d. Device id=7891.
Medium devsel. IRQ 9.
I/O at 0xc800 [Oxc801].
Bus 0, device 12, function 0.
Communication controller: Motorola Unknown device (rev 0).
Vendor id=1057. Device id=5600.
Medium devsel. Fast back-to-back capable. IRQ 5. Master Capable.
Latency=32. Min Gnt=1. Max Lat=255.
Prefetchable 32 bit memory at 0xdb001000. [0xdb001008].
Bus 1, device 0, function 0:
VGA compatible controller: ATI Unkown device (rev 0).
Vendor id=1002.
Device id=5046.
Medium devsel. Fast back-to-back capable. IRQ 10. Master Capable.
Latency=32. Min Gnt=8.
Prefetchable 32 bit memory at 0xd4000000 [0xd4000008].
I/O at 0x9000 [0x9001].
Non-prefetchable 32 bit memory at 0xd9000000.
I hope that makes sense to somebody. What must I do now to get one of my
modems working?
Much appreciated,
-
To unsubscribe from this list: send the line "unsubscribe linux-newbie" in
the body of a message to [EMAIL PROTECTED]
Please read the FAQ at http://www.linux-learn.org/faqs
