According to the LILO docs, Lilo stopping after LI
is usually caused by a disk geometry mismatch.
I had this problem when using a disk >540Mb on a
system with a Pre-LBA BIOS.
It's odd that Lilo HAD been working, and just
suddenly crapped-out.
disi you recently add a new harddisk? Check your
BIOS settings for the harddisks, to make sure they
are what they should be.
Failing that, I would suggest using a
boot/rescue disk, if you have one, and re-running
LILO. If you don't have a boot/rescue disk, you will
need to make one from your Linux-distribution CD,
or download a boot image and rawrite it to a disk.
Hope this helps,
Bryan Scaringe
> For the first time in two months of using LILO, it froze up today as it
> was loading. It got so far as LI, and then stopped. Is there a
> solution around this? I really need to get back on my computer (we use
> it for homeschooling). Hey, would i LI 2 u?
>
> Brian Lehr
>
>
