Ivan Vicente Janvrot Miranda writes:
> 1) The ATA and persist operate eletromecanichal parts is the modem too
> often (hook relay)
Add the 'passive' option. It tells pppd to try to initiate a connection
when it first comes up, but if it fails to just passively hang around
waiting for an LCP packet instead restarting.
> 2) Synchronization after a line open/close circuit is difficult or does
> not happen.
Check your modem manual for some sort of a 'dumb' mode, designed for this
sort of use. Leave both modems powered up all the time (it would be
simplest to leave both computers powered up as well).
You might also want to look into getting a couple of so-called "short-haul"
modems, designed for just this sort of thing. You should be able to do
better than 33600.
--
John Hasler
[EMAIL PROTECTED] (John Hasler)
Dancing Horse Hill
Elmwood, WI
-
To unsubscribe from this list: send the line "unsubscribe linux-ppp" in
the body of a message to [EMAIL PROTECTED]
