Hi Jacopo,
On Monday, 10 September 2018 17:12:30 EEST Laurent Pinchart wrote:
> Hi Jacopo,
>
> Thank you for the patch.
>
> On Wednesday, 5 September 2018 18:29:43 EEST Jacopo Mondi wrote:
> > From: Koji Matsuoka <[email protected]>
> >
> > Add device nodes for VIN4, VIN5 and CSI40 to R-Car E3 R8A77990 device
> > tree.
> >
> > Signed-off-by: Koji Matsuoka <[email protected]>
> > Signed-off-by: Takeshi Kihara <[email protected]>
> > Signed-off-by: Jacopo Mondi <[email protected]>
> > ---
> >
> > arch/arm64/boot/dts/renesas/r8a77990.dtsi | 79 ++++++++++++++++++++++++++
> > 1 file changed, 79 insertions(+)
> >
> > diff --git a/arch/arm64/boot/dts/renesas/r8a77990.dtsi
> > b/arch/arm64/boot/dts/renesas/r8a77990.dtsi index ae89260..0ae7bbe 100644
> > --- a/arch/arm64/boot/dts/renesas/r8a77990.dtsi
> > +++ b/arch/arm64/boot/dts/renesas/r8a77990.dtsi
> > @@ -337,6 +337,85 @@
> >
> > status = "disabled";
> >
> > };
> >
> > + csi40: csi2@feaa0000 {
>
> I believe Simon would like to keep the nodes sorted by address
>
> > + compatible = "renesas,r8a77990-csi2",
> > "renesas,rcar-gen3-csi2";
> > + reg = <0 0xfeaa0000 0 0x10000>;
>
> 0x10000 seems pretty large to me.
>
> Apart from that,
>
> Reviewed-by: Laurent Pinchart <[email protected]>
>
> > + interrupts = <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>;
> > + clocks = <&cpg CPG_MOD 716>;
> > + power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
> > + resets = <&cpg 716>;
> > + status = "disabled";
> > +
> > + ports {
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > +
> > + port@1 {
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > +
> > + reg = <1>;
> > +
> > + csi40vin4: endpoint@0 {
> > + reg = <0>;
> > + remote-endpoint = <&vin4csi40>;
> > + };
> > + csi40vin5: endpoint@1 {
> > + reg = <1>;
> > + remote-endpoint = <&vin5csi40>;
> > + };
> > + };
> > + };
> > + };
> > +
> > + vin4: video@e6ef4000 {
> > + compatible = "renesas,vin-r8a77990";
> > + reg = <0 0xe6ef4000 0 0x1000>;
> > + interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
> > + clocks = <&cpg CPG_MOD 807>;
> > + power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
> > + resets = <&cpg 807>;
> > + renesas,id = <4>;
> > + status = "disabled";
> > +
> > + ports {
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > +
> > + port@1 {
> > + reg = <1>;
> > +
> > + vin4csi40: endpoint {
> > + remote-endpoint= <&csi40vin4>;
I've just realized that this endpoint has to be numbered, otherwise MC links
won't be created.
> > + };
> > + };
> > + };
> > + };
> > +
> > + vin5: video@e6ef5000 {
> > + compatible = "renesas,vin-r8a77990";
> > + reg = <0 0xe6ef5000 0 0x1000>;
> > + interrupts = <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>;
> > + clocks = <&cpg CPG_MOD 806>;
> > + power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
> > + resets = <&cpg 806>;
> > + renesas,id = <5>;
> > + status = "disabled";
> > +
> > + ports {
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > +
> > + port@1 {
> > + reg = <1>;
> > +
> > + vin5csi40: endpoint {
> > + remote-endpoint= <&csi40vin5>;
Same here.
> > + };
> > + };
> > + };
> > + };
> > +
> >
> > scif2: serial@e6e88000 {
> >
> > compatible = "renesas,scif-r8a77990",
> >
> > "renesas,rcar-gen3-scif", "renesas,scif";
--
Regards,
Laurent Pinchart
