On 18/06/2019 18:17, Jernej Škrabec wrote:
> Dne torek, 18. junij 2019 ob 19:13:16 CEST je Clément Péron napisal(a):
Hi,
>> On Thu, 16 May 2019 at 03:27, Andre Przywara <andre.przyw...@arm.com> wrote:
>>> The first USB controller on the H6 SoC shares a PHY with the OTG
>>> controller. Reportedly to avoid problems with the VBUS regulator under
>>> Linux, we don't link OHCI0/EHCI0 to the USB PHY in the H6 .dtsi file.
>>>
>>> However on boards which can't use peripheral mode (because they have an
>>> always-on VBUS supply on an USB-A socket) we don't need this trick, and
>>> can properly connect host controller 0 to the PHY 0.
>>>
>>> Amend the Pine H64 .dts to reflect this. This enables the upper USB port
>>> in U-Boot on this board.
>>>
>>> Signed-off-by: Andre Przywara <andre.przyw...@arm.com>
>>> ---
>>>
>>> arch/arm/dts/sun50i-h6-pine-h64.dts | 5 ++++-
>>> 1 file changed, 4 insertions(+), 1 deletion(-)
>>>
>>> diff --git a/arch/arm/dts/sun50i-h6-pine-h64.dts
>>> b/arch/arm/dts/sun50i-h6-pine-h64.dts index 4802902e12..aad7646b18 100644
>>> --- a/arch/arm/dts/sun50i-h6-pine-h64.dts
>>> +++ b/arch/arm/dts/sun50i-h6-pine-h64.dts
>>> @@ -96,6 +96,8 @@
>>>
>>> };
>>>
>>> &ehci0 {
>>>
>>> + phys = <&usb2phy 0>;
>>> + phy-names = "usb";
>>>
>>> status = "okay";
>>>
>>> };
>>>
>>> @@ -120,6 +122,8 @@
>>>
>>> };
>>>
>>> &ohci0 {
>>>
>>> + phys = <&usb2phy 0>;
>>> + phy-names = "usb";
>>>
>>> status = "okay";
>>>
>>> };
>>>
>>> @@ -255,7 +259,6 @@
>>>
>>> &usb2otg {
>>>
>>> dr_mode = "host";
>>>
>>> - status = "okay";
>>>
>>> };
>>
>> Maybe you should add explicit comments in the device-tree to avoid
>> losing this at next sync with linux dt.
>
> If DT change is U-Boot specific, it should be moved to *-u-boot.dtsi file,
> although I'm not sure if you can delete properties in such way.
I never planned to deviate from Linux, just wanted to provide something
that works, for now. This change should go into Linux as well, of
course. Will push this there ASAP.
Cheers,
Andre.
>
> Best regards,
> Jernej
>
>>
>> Regards,
>> Clement
>>
>>> &usb2phy {
>>>
>>> --
>>> 2.14.5
>
>
>
>
--
You received this message because you are subscribed to the Google Groups
"linux-sunxi" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to linux-sunxi+unsubscr...@googlegroups.com.
To view this discussion on the web, visit
https://groups.google.com/d/msgid/linux-sunxi/ca74dcb3-7455-212c-77c9-43529aa740cc%40arm.com.
For more options, visit https://groups.google.com/d/optout.
