Well, First I thought I had a Iomega Ditto Dash card... now it
seems I have an Iomega Ditto EZ PnP controller...
Can anyone help me configure this? I have used pnpdump to get some of
the information, but I'm still stuck.
I'm running RH 5.2, w/ 2.2.5 kernel. I have the March, version of the -unstable-
version... compiled and isntall ok... this what I see in the /var/log/messages...
May 3 22:06:09 localhost kernel: ftape v4.03-pre-3 02/24/99
May 3 22:06:09 localhost kernel:
May 3 22:06:09 localhost kernel: (c) 1993-1996 Bas Laarhoven
May 3 22:06:09 localhost kernel: (c) 1995-1996 Kai Harrekilde-Petersen
May 3 22:06:09 localhost kernel: (c) 1996-1998 Claus-Justus Heine
([EMAIL PROTECTED])
May 3 22:06:09 localhost kernel:
May 3 22:06:09 localhost kernel: QIC-117 driver for QIC-40/80/3010/3020/Ditto 2GB/MAX
floppy tape
drives.
May 3 22:06:09 localhost kernel: Compiled for Linux version 2.2.5
May 3 22:06:09 localhost kernel: installing QIC-117 floppy tape hardware drive ...
May 3 22:06:09 localhost kernel: ftape_init @ 0xc4b7e208.
May 3 22:06:10 localhost kernel: zftape for ftape v4.03-pre-3 02/24/99
May 3 22:06:10 localhost kernel: (c) 1996, 1997 Claus-Justus Heine
([EMAIL PROTECTED])
May 3 22:06:10 localhost kernel: vfs interface for ftape floppy tape driver.
May 3 22:06:10 localhost kernel: Support for QIC-113 compatible volume table.
May 3 22:06:10 localhost kernel: Compiled for Linux version 2.2.5 with versioned
symbols
May 3 22:06:10 localhost kernel: [000] zftape-init.c (zft_init) - zft_init @
0xc4bb4920.
May 3 22:06:10 localhost kernel: [001] zftape-init.c (zft_init) - installing zftape
VFS interface for
ftape driver ....
May 3 22:06:10 localhost kernel: fdc-internal.c: fdc_internal_register @ 0xc4824b40.
May 3 22:06:10 localhost kernel: [002] fdc-io.c (fdc_register_Rd359df4d) - Probing
for ftape-internal
tape drive slot 0.
May 3 22:06:10 localhost kernel: [003] 0 fdc-internal.c (_fdc_int_detect) -
called with count 0.
May 3 22:06:10 localhost kernel: [004] 0 fdc-internal.c (_fdc_int_detect) -
fdc[0] base: 0x0200,
irq: 3, dma: 0.
May 3 22:06:10 localhost kernel: [005] 0 ftape-buffer.c (add_one_buffer) -
buffer nr #1 @
c3779360, dma area @ c0ef8000.
May 3 22:06:10 localhost kernel: [006] 0 ftape-buffer.c (add_one_buffer) -
buffer nr #2 @
c3779180, dma area @ c0f80000.
May 3 22:06:10 localhost kernel: [007] 0 ftape-buffer.c (add_one_buffer) -
buffer nr #3 @
c37790e0, dma area @ c0eb8000.
May 3 22:06:11 localhost kernel: [008] 0 ftape-calibr.c (ftape_calibrate) -
calibr_count: 6301,
calibr_time: 9997 us.
May 3 22:06:11 localhost kernel: [009] 0 ftape-calibr.c (ftape_calibrate) - TC
for `fdc_wait()' =
1586 nsec (at 6301 counts).
May 3 22:06:12 localhost kernel: [010] 0 fdc-io.c (fdc_reset) - no drive polling
interrupt!.
May 3 22:06:12 localhost kernel: [011] 0 fdc-io.c (fdc_probe) - Iomega DASH EZ
FDC found.
May 3 22:06:13 localhost kernel: [012] 0 fdc-io.c (fdc_reset) - no drive polling
interrupt!.
May 3 22:06:43 localhost kernel: [013] 0 ftape-ctl.c (ftape_activate_drive) - No
tape drive found.
May 3 22:06:45 localhost kernel: [014] 0 fdc-io.c (fdc_reset) - no drive polling
interrupt!.
May 3 22:06:45 localhost kernel: [015] 0 ftape-ctl.c (ftape_enable_R7ec0d5d4) -
ftape_activate_drive(ftape, &ftape->drive_type) failed: -19.
May 3 22:06:45 localhost kernel: [016] 0 zftape-ctl.c (_zft_open) -
ftape_enable_R7ec0d5d4(sel) failed:
-19.
May 3 22:06:45 localhost kernel: [017] 0 zftape-init.c (zft_open) - _zft_open failed.
