Did you try higher speeds and have it fail? Or did you forget to do speed=4?
In addition.. the USB interface generally gets 4x (6x if the conditions are right) the PCMCIA interface gets the 8x and USB2 will get much higher speeds. If you're getting 8x on the parallel port, that's exceedingly cool. But I don't think that's happening. I think I've done 4x on cdrecord before.. but I'll go check... Yep, just did it successfully (tested on my test machine here with a 524MiB image). I would say that this is probably more a cdrecord/usb-storage/performance of your machine kinda question. Hope this all helps, Ken Hahn ----- Original Message ----- From: "Richard W. Knight" <[EMAIL PROTECTED]> To: "Ken Hahn" <[EMAIL PROTECTED]> Cc: "Greg KH" <[EMAIL PROTECTED]>; "Matthew Dharm" <[EMAIL PROTECTED]>; <[EMAIL PROTECTED]> Sent: Wednesday, February 06, 2002 9:51 PM Subject: Re: PATCH[linux-usb-devel] Firmware Frustration > Ken, > > I was able to blank and then burn a CD using my Backpack CD ReWriter and > the bpckusb driver/patch. Worked great with only one minor problem. I > was only able to get 2x speed. This is a newer drive and I am able to > get up to 8x on Win2K or the parallel port under Linux (I have a laptop > that does not have a parallel port built in, only on the port replicator). > > Thanks again > Rick Knight > ([EMAIL PROTECTED]) > > Ken Hahn wrote: > > > How embarassing. > > > > It will work with all of the firmwares being built. > > > > I screwed up my ifdefs (that I changed at the last moment, of course) > > Here's new patch. > > > > Take two (thanks for noticing that) > > > > -Ken Hahn > > > > ----- Original Message ----- > > From: "Richard W. Knight" <[EMAIL PROTECTED]> > > To: "Ken Hahn" <[EMAIL PROTECTED]> > > Cc: "Greg KH" <[EMAIL PROTECTED]>; <[EMAIL PROTECTED]> > > Sent: Tuesday, February 05, 2002 12:11 PM > > Subject: Re: [linux-usb-devel] Firmware Frustration > > > > > > > >>Oops, here's the attachment. > >> > >>Thanks, > >>Rick Knight > >>([EMAIL PROTECTED]) > >> > >>Ken Hahn wrote: > >> > >> > >>>On Dec 19, 2001 Greg KH wrote: > >>> > >>> > >>> > >>>>I'd accept a patch for a driver that has the firmware _within_ the > >>>>driver, just like the current usb-serial drivers do. > >>>> > >>>>This will let people use the driver today, and when we finally get the > >>>>firmware download issues worked out, your driver can be converted to use > >>>>the same interface that the usb-serial drivers will use. > >>>> > >>>>Sound acceptable? > >>>> > >>>> > >>>Well sorry I'm a little late with this, but I've been busy with other > >>>projects at work till now. (And taking a holiday vacation (and getting > >>>engaged... whee!)) > >>> > >>>Here is an attempt at a patch for 2.4.17. > >>> > >>>I'm still fairly new at this. Any corrections, changes, additions? > >>> > >>>Thanks, > >>> > >>>Ken Hahn > >>> > >>> > >> > >>-- > >>Rick Knight > >>([EMAIL PROTECTED]) > >> > >> > > > > > > -------------------------------------------------------------------------- -- > > ---- > > > > > > > >>make -C kernel > >> > > CFLAGS="-D__KERNEL__ -I/usr/src/linux-2.4.17/include -Wall -Wstrict-prototyp > > es -Wno-trigraphs -O2 -fomit-frame-pointer -fno-strict-aliasing -fno-common > > -pipe -mpreferred-stack-boundary=2 -march=i686 -DMODULE -DMODVERSIONS -inc lu > > de /usr/src/linux-2.4.17/include/linux/modversions.h" MAKING_MODULES=1 > > modules > > > >>make[1]: Entering directory `/usr/src/linux-2.4.17/kernel' > >>make[1]: Nothing to be done for `modules'. > >>make[1]: Leaving directory `/usr/src/linux-2.4.17/kernel' > >>make -C drivers > >> > > CFLAGS="-D__KERNEL__ -I/usr/src/linux-2.4.17/include -Wall -Wstrict-prototyp > > es -Wno-trigraphs -O2 -fomit-frame-pointer -fno-strict-aliasing -fno-common > > -pipe -mpreferred-stack-boundary=2 -march=i686 -DMODULE -DMODVERSIONS -inc lu > > de /usr/src/linux-2.4.17/include/linux/modversions.h" MAKING_MODULES=1 > > modules > > > >>make[1]: Entering directory `/usr/src/linux-2.4.17/drivers' > >>make -C atm modules > >>make[2]: Entering directory `/usr/src/linux-2.4.17/drivers/atm' > >>ld -m elf_i386 -r -o fore_200e.o fore200e.o fore200e_pca_fw.o > >>make[2]: Leaving directory `/usr/src/linux-2.4.17/drivers/atm' > >>make -C block modules > >>make[2]: Entering directory `/usr/src/linux-2.4.17/drivers/block' > >>make -C paride modules > >>make[3]: Entering directory `/usr/src/linux-2.4.17/drivers/block/paride' > >>make[3]: Nothing to be done for `modules'. > >>make[3]: Leaving directory `/usr/src/linux-2.4.17/drivers/block/paride' > >>make[2]: Leaving directory `/usr/src/linux-2.4.17/drivers/block' > >>make -C cdrom modules > >>make[2]: Entering directory `/usr/src/linux-2.4.17/drivers/cdrom' > >>make[2]: Nothing to be done for `modules'. > >>make[2]: Leaving directory `/usr/src/linux-2.4.17/drivers/cdrom' > >>make -C char modules > >>make[2]: Entering directory `/usr/src/linux-2.4.17/drivers/char' > >>make -C drm modules > >>make[3]: Entering directory `/usr/src/linux-2.4.17/drivers/char/drm' > >>ld -m elf_i386 -r -o r128.o r128_drv.o r128_cce.o r128_state.o > >>ld -m elf_i386 -r -o radeon.o radeon_drv.o radeon_cp.o radeon_state.o > >>make[3]: Leaving directory `/usr/src/linux-2.4.17/drivers/char/drm' > >>make -C ftape modules > >>make[3]: Entering directory `/usr/src/linux-2.4.17/drivers/char/ftape' > >>make -C compressor modules > >>make[4]: Entering directory > >> > > `/usr/src/linux-2.4.17/drivers/char/ftape/compressor' > > > >>make[4]: Nothing to be done for `modules'. > >>make[4]: Leaving directory > >> > > `/usr/src/linux-2.4.17/drivers/char/ftape/compressor' > > > >>make -C lowlevel modules > >>make[4]: Entering directory > >> > > `/usr/src/linux-2.4.17/drivers/char/ftape/lowlevel' > > > >>make[4]: Nothing to be done for `modules'. > >>make[4]: Leaving directory > >> > > `/usr/src/linux-2.4.17/drivers/char/ftape/lowlevel' > > > >>make -C zftape modules > >>make[4]: Entering directory > >> > > `/usr/src/linux-2.4.17/drivers/char/ftape/zftape' > > > >>make[4]: Nothing to be done for `modules'. > >>make[4]: Leaving directory > >> > > `/usr/src/linux-2.4.17/drivers/char/ftape/zftape' > > > >>make[3]: Leaving directory `/usr/src/linux-2.4.17/drivers/char/ftape' > >>make -C joystick modules > >>make[3]: Entering directory `/usr/src/linux-2.4.17/drivers/char/joystick' > >>make[3]: Nothing to be done for `modules'. > >>make[3]: Leaving directory `/usr/src/linux-2.4.17/drivers/char/joystick' > >>make -C pcmcia modules > >>make[3]: Entering directory `/usr/src/linux-2.4.17/drivers/char/pcmcia' > >>make[3]: Nothing to be done for `modules'. > >>make[3]: Leaving directory `/usr/src/linux-2.4.17/drivers/char/pcmcia' > >>make[2]: Leaving directory `/usr/src/linux-2.4.17/drivers/char' > >>make -C hotplug modules > >>make[2]: Entering directory `/usr/src/linux-2.4.17/drivers/hotplug' > >>make[2]: Nothing to be done for `modules'. > >>make[2]: Leaving directory `/usr/src/linux-2.4.17/drivers/hotplug' > >>make -C i2c modules > >>make[2]: Entering directory `/usr/src/linux-2.4.17/drivers/i2c' > >>make[2]: Nothing to be done for `modules'. > >>make[2]: Leaving directory `/usr/src/linux-2.4.17/drivers/i2c' > >>make -C ide modules > >>make[2]: Entering directory `/usr/src/linux-2.4.17/drivers/ide' > >>make[2]: Nothing to be done for `modules'. > >>make[2]: Leaving directory `/usr/src/linux-2.4.17/drivers/ide' > >>make -C ieee1394 modules > >>make[2]: Entering directory `/usr/src/linux-2.4.17/drivers/ieee1394' > >>ld -m elf_i386 -r -o ieee1394.o ieee1394_core.o ieee1394_transactions.o > >> > > hosts.o highlevel.o csr.o nodemgr.o > > > >>make[2]: Leaving directory `/usr/src/linux-2.4.17/drivers/ieee1394' > >>make -C input modules > >>make[2]: Entering directory `/usr/src/linux-2.4.17/drivers/input' > >>make[2]: Nothing to be done for `modules'. > >>make[2]: Leaving directory `/usr/src/linux-2.4.17/drivers/input' > >>make -C isdn modules > >>make[2]: Entering directory `/usr/src/linux-2.4.17/drivers/isdn' > >>ld -m elf_i386 -r -o isdn.o isdn_net.o isdn_tty.o isdn_v110.o > >> > > isdn_common.o isdn_ppp.o isdn_audio.o isdn_ttyfax.o > > > >>make -C avmb1 modules > >>make[3]: Entering directory `/usr/src/linux-2.4.17/drivers/isdn/avmb1' > >>ld -m elf_i386 -r -o kernelcapi.o kcapi.o > >>make[3]: Leaving directory `/usr/src/linux-2.4.17/drivers/isdn/avmb1' > >>make -C hisax modules > >>md5sum: WARNING: 13 of 13 computed checksums did NOT match > >>make[3]: Entering directory `/usr/src/linux-2.4.17/drivers/isdn/hisax' > >>ld -m elf_i386 -r -o hisax.o config.o isdnl1.o tei.o isdnl2.o isdnl3.o > >> > > lmgr.o q931.o callc.o fsm.o cert.o arcofi.o asuscom.o avm_a1.o avm_a1p.o > > avm_pci.o bkm_a4t.o bkm_a8.o diva.o elsa.o gazel.o hfc_2bds0.o hfc_2bs0.o > > hfc_pci.o hfc_sx.o hfcscard.o hscx.o icc.o isac.o isar.o isurf.o ix1_micro.o > > jade.o l3_1tr6.o l3dss1.o l3ni1.o mic.o netjet.o niccy.o nj_s.o nj_u.o > > s0box.o saphir.o sedlbauer.o sportster.o teleint.o teles0.o teles3.o > > telespci.o w6692.o > > > >>make[3]: Leaving directory `/usr/src/linux-2.4.17/drivers/isdn/hisax' > >>make -C hysdn modules > >>make[3]: Entering directory `/usr/src/linux-2.4.17/drivers/isdn/hysdn' > >>ld -m elf_i386 -r -o hysdn.o hysdn_procconf.o hysdn_proclog.o boardergo.o > >> > > hysdn_boot.o hysdn_sched.o hysdn_net.o hysdn_init.o hycapi.o > > > >>make[3]: Leaving directory `/usr/src/linux-2.4.17/drivers/isdn/hysdn' > >>make -C icn modules > >>make[3]: Entering directory `/usr/src/linux-2.4.17/drivers/isdn/icn' > >>make[3]: Nothing to be done for `modules'. > >>make[3]: Leaving directory `/usr/src/linux-2.4.17/drivers/isdn/icn' > >>make -C isdnloop modules > >>make[3]: Entering directory `/usr/src/linux-2.4.17/drivers/isdn/isdnloop' > >>make[3]: Nothing to be done for `modules'. > >>make[3]: Leaving directory `/usr/src/linux-2.4.17/drivers/isdn/isdnloop' > >>make -C pcbit modules > >>make[3]: Entering directory `/usr/src/linux-2.4.17/drivers/isdn/pcbit' > >>ld -m elf_i386 -r -o pcbit.o module.o edss1.o drv.o layer2.o capi.o > >> > > callbacks.o > > > >>make[3]: Leaving directory `/usr/src/linux-2.4.17/drivers/isdn/pcbit' > >>make[2]: Leaving directory `/usr/src/linux-2.4.17/drivers/isdn' > >>make -C md modules > >>make[2]: Entering directory `/usr/src/linux-2.4.17/drivers/md' > >>make[2]: Nothing to be done for `modules'. > >>make[2]: Leaving directory `/usr/src/linux-2.4.17/drivers/md' > >>make -C media modules > >>make[2]: Entering directory `/usr/src/linux-2.4.17/drivers/media' > >>make -C radio modules > >>make[3]: Entering directory `/usr/src/linux-2.4.17/drivers/media/radio' > >>ld -m elf_i386 -r -o miropcm20.o miropcm20-rds-core.o miropcm20-radio.o > >>make[3]: Leaving directory `/usr/src/linux-2.4.17/drivers/media/radio' > >>make -C video modules > >>make[3]: Entering directory `/usr/src/linux-2.4.17/drivers/media/video' > >>ld -m elf_i386 -r -o bttv.o bttv-driver.o bttv-cards.o bttv-if.o > >>ld -m elf_i386 -r -o zoran.o zr36120.o zr36120_i2c.o zr36120_mem.o > >>make[3]: Leaving directory `/usr/src/linux-2.4.17/drivers/media/video' > >>make[2]: Leaving directory `/usr/src/linux-2.4.17/drivers/media' > >>make -C message/fusion modules > >>make[2]: Entering directory `/usr/src/linux-2.4.17/drivers/message/fusion' > >>make[2]: Nothing to be done for `modules'. > >>make[2]: Leaving directory `/usr/src/linux-2.4.17/drivers/message/fusion' > >>make -C message/i2o modules > >>make[2]: Entering directory `/usr/src/linux-2.4.17/drivers/message/i2o' > >>make[2]: Nothing to be done for `modules'. > >>make[2]: Leaving directory `/usr/src/linux-2.4.17/drivers/message/i2o' > >>make -C misc modules > >>make[2]: Entering directory `/usr/src/linux-2.4.17/drivers/misc' > >>make[2]: Nothing to be done for `modules'. > >>make[2]: Leaving directory `/usr/src/linux-2.4.17/drivers/misc' > >>make -C net modules > >>make[2]: Entering directory `/usr/src/linux-2.4.17/drivers/net' > >>ld -m elf_i386 -r -o rcpci.o rcpci45.o rclanmtl.o > >>make -C appletalk modules > >>make[3]: Entering directory `/usr/src/linux-2.4.17/drivers/net/appletalk' > >>make[3]: Nothing to be done for `modules'. > >>make[3]: Leaving directory `/usr/src/linux-2.4.17/drivers/net/appletalk' > >>make -C fc modules > >>make[3]: Entering directory `/usr/src/linux-2.4.17/drivers/net/fc' > >>make[3]: Nothing to be done for `modules'. > >>make[3]: Leaving directory `/usr/src/linux-2.4.17/drivers/net/fc' > >>make -C irda modules > >>make[3]: Entering directory `/usr/src/linux-2.4.17/drivers/net/irda' > >>make[3]: Nothing to be done for `modules'. > >>make[3]: Leaving directory `/usr/src/linux-2.4.17/drivers/net/irda' > >>make -C pcmcia modules > >>make[3]: Entering directory `/usr/src/linux-2.4.17/drivers/net/pcmcia' > >>make[3]: Nothing to be done for `modules'. > >>make[3]: Leaving directory `/usr/src/linux-2.4.17/drivers/net/pcmcia' > >>make -C sk98lin modules > >>make[3]: Entering directory `/usr/src/linux-2.4.17/drivers/net/sk98lin' > >>make[3]: Nothing to be done for `modules'. > >>make[3]: Leaving directory `/usr/src/linux-2.4.17/drivers/net/sk98lin' > >>make -C skfp modules > >>make[3]: Entering directory `/usr/src/linux-2.4.17/drivers/net/skfp' > >>make[3]: Nothing to be done for `modules'. > >>make[3]: Leaving directory `/usr/src/linux-2.4.17/drivers/net/skfp' > >>make -C tokenring modules > >>make[3]: Entering directory `/usr/src/linux-2.4.17/drivers/net/tokenring' > >>make[3]: Nothing to be done for `modules'. > >>make[3]: Leaving directory `/usr/src/linux-2.4.17/drivers/net/tokenring' > >>make -C tulip modules > >>make[3]: Entering directory `/usr/src/linux-2.4.17/drivers/net/tulip' > >>make[3]: Nothing to be done for `modules'. > >>make[3]: Leaving directory `/usr/src/linux-2.4.17/drivers/net/tulip' > >>make -C wan modules > >>make[3]: Entering directory `/usr/src/linux-2.4.17/drivers/net/wan' > >>ld -m elf_i386 -r -o wanpipe.o sdlamain.o sdla_ft1.o sdla_chdlc.o > >> > > sdla_ppp.o > > > >>ld -m elf_i386 -r -o cyclomx.o cycx_main.o cycx_x25.o > >>make[3]: Leaving directory `/usr/src/linux-2.4.17/drivers/net/wan' > >>make -C wireless modules > >>make[3]: Entering directory `/usr/src/linux-2.4.17/drivers/net/wireless' > >>make[3]: Nothing to be done for `modules'. > >>make[3]: Leaving directory `/usr/src/linux-2.4.17/drivers/net/wireless' > >>make[2]: Leaving directory `/usr/src/linux-2.4.17/drivers/net' > >>make -C parport modules > >>make[2]: Entering directory `/usr/src/linux-2.4.17/drivers/parport' > >>ld -m elf_i386 -r -o parport.o share.o ieee1284.o ieee1284_ops.o init.o > >> > > procfs.o daisy.o probe.o > > > >>make[2]: Leaving directory `/usr/src/linux-2.4.17/drivers/parport' > >>make -C pcmcia modules > >>make[2]: Entering directory `/usr/src/linux-2.4.17/drivers/pcmcia' > >>ld -m elf_i386 -r -o pcmcia_core.o cistpl.o rsrc_mgr.o bulkmem.o cs.o > >> > > cardbus.o > > > >>ld -m elf_i386 -r -o yenta_socket.o pci_socket.o yenta.o > >>make[2]: Leaving directory `/usr/src/linux-2.4.17/drivers/pcmcia' > >>make -C pnp modules > >>make[2]: Entering directory `/usr/src/linux-2.4.17/drivers/pnp' > >>make[2]: Nothing to be done for `modules'. > >>make[2]: Leaving directory `/usr/src/linux-2.4.17/drivers/pnp' > >>make -C scsi modules > >>make[2]: Entering directory `/usr/src/linux-2.4.17/drivers/scsi' > >>ld -m elf_i386 -r -o scsi_mod.o scsi.o hosts.o scsi_ioctl.o constants.o > >> > > scsicam.o scsi_proc.o scsi_error.o scsi_obsolete.o scsi_queue.o scsi_lib.o > > scsi_merge.o scsi_dma.o scsi_scan.o scsi_syms.o > > > >>ld -m elf_i386 -r -o initio.o ini9100u.o i91uscsi.o > >>ld -m elf_i386 -r -o a100u2w.o inia100.o i60uscsi.o > >>ld -m elf_i386 -r -o cpqfc.o cpqfcTSinit.o cpqfcTScontrol.o cpqfcTSi2c.o > >> > > cpqfcTSworker.o cpqfcTStrigger.o > > > >>ld -m elf_i386 -r -o sd_mod.o sd.o > >>ld -m elf_i386 -r -o sr_mod.o sr.o sr_ioctl.o sr_vendor.o > >>make -C aic7xxx modules > >>make[3]: Entering directory `/usr/src/linux-2.4.17/drivers/scsi/aic7xxx' > >>ld -m elf_i386 -r -o aic7xxx_mod.o aic7xxx_linux.o aic7xxx_proc.o > >> > > aic7770_linux.o aic7xxx_linux_pci.o aic7xxx.o aic7xxx_93cx6.o aic7770.o > > aic7xxx_pci.o > > > >>make[3]: Leaving directory `/usr/src/linux-2.4.17/drivers/scsi/aic7xxx' > >>make -C pcmcia modules > >>make[3]: Entering directory `/usr/src/linux-2.4.17/drivers/scsi/pcmcia' > >>ld -m elf_i386 -r -o qlogic_cs.o qlogic_stub.o qlogicfas.o > >>ld -m elf_i386 -r -o fdomain_cs.o fdomain_stub.o fdomain.o > >>ld -m elf_i386 -r -o aha152x_cs.o aha152x_stub.o aha152x.o > >>make[3]: Leaving directory `/usr/src/linux-2.4.17/drivers/scsi/pcmcia' > >>make[2]: Leaving directory `/usr/src/linux-2.4.17/drivers/scsi' > >>make -C sound modules > >>make[2]: Entering directory `/usr/src/linux-2.4.17/drivers/sound' > >>ld -m elf_i386 -r -o soundcore.o sound_core.o sound_firmware.o > >>ld -m elf_i386 -r -o sound.o dev_table.o soundcard.o sound_syms.o audio.o > >> > > audio_syms.o dmabuf.o midi_syms.o midi_synth.o midibuf.o sequencer.o > > sequencer_syms.o sound_timer.o sys_timer.o > > > >>ld -m elf_i386 -r -o sb_lib.o sb_common.o sb_audio.o sb_midi.o sb_mixer.o > >> > > sb_ess.o > > > >>ld -m elf_i386 -r -o pas2.o pas2_card.o pas2_midi.o pas2_mixer.o > >> > > pas2_pcm.o > > > >>ld -m elf_i386 -r -o sb.o sb_card.o > >>ld -m elf_i386 -r -o wavefront.o wavfront.o wf_midi.o yss225.o > >>ld -m elf_i386 -r -o gus.o gus_card.o gus_midi.o gus_vol.o gus_wave.o > >> > > ics2101.o > > > >>make -C cs4281 modules > >>make[3]: Entering directory `/usr/src/linux-2.4.17/drivers/sound/cs4281' > >>make[3]: Nothing to be done for `modules'. > >>make[3]: Leaving directory `/usr/src/linux-2.4.17/drivers/sound/cs4281' > >>make -C emu10k1 modules > >>make[3]: Entering directory `/usr/src/linux-2.4.17/drivers/sound/emu10k1' > >>make[3]: Nothing to be done for `modules'. > >>make[3]: Leaving directory `/usr/src/linux-2.4.17/drivers/sound/emu10k1' > >>make[2]: Leaving directory `/usr/src/linux-2.4.17/drivers/sound' > >>make -C telephony modules > >>make[2]: Entering directory `/usr/src/linux-2.4.17/drivers/telephony' > >>make[2]: Nothing to be done for `modules'. > >>make[2]: Leaving directory `/usr/src/linux-2.4.17/drivers/telephony' > >>make -C usb modules > >>make[2]: Entering directory `/usr/src/linux-2.4.17/drivers/usb' > >>ld -m elf_i386 -r -o usbcore.o usb.o usb-debug.o hub.o devio.o inode.o > >> > > drivers.o devices.o > > > >>ld -m elf_i386 -r -o hid.o hid-core.o hid-input.o > >> > >> > > gcc -D__KERNEL__ -I/usr/src/linux-2.4.17/include -Wall -Wstrict-prototypes - > > Wno-trigraphs -O2 -fomit-frame-pointer -fno-strict-aliasing -fno-common -pip > > e -mpreferred-stack-boundary=2 -march=i686 -DMODULE -DMODVERSIONS -include > > /usr/src/linux-2.4.17/include/linux/modversions.h -c -o storage/bpckusb.o > > storage/bpckusb.c > > > >>In file included from storage/bpckusb.c:9: > >>storage/bpckusb_fw.h:771:8: warning: extra tokens at end of #endif > >> > > directive > > > >>storage/bpckusb_fw.h:1044:8: warning: extra tokens at end of #endif > >> > > directive > > > >>storage/bpckusb.c: In function `bpckusb_probe': > >>storage/bpckusb.c:163: `bpckusb_5_ATAPI_firmware' undeclared (first use in > >> > > this function) > > > >>storage/bpckusb.c:163: (Each undeclared identifier is reported only once > >>storage/bpckusb.c:163: for each function it appears in.) > >>storage/bpckusb.c:177: `bpckusb_5_IDE_firmware' undeclared (first use in > >> > > this function) > > > >>storage/bpckusb.c:184: `bpckusb_6_IDE_firmware' undeclared (first use in > >> > > this function) > > > >>make[2]: *** [storage/bpckusb.o] Error 1 > >>make[2]: Leaving directory `/usr/src/linux-2.4.17/drivers/usb' > >>make[1]: *** [_modsubdir_usb] Error 2 > >>make[1]: Leaving directory `/usr/src/linux-2.4.17/drivers' > >>make: *** [_mod_drivers] Error 2 > >> > >> > > > -- > Rick Knight > ([EMAIL PROTECTED]) > > > _______________________________________________ > [EMAIL PROTECTED] > To unsubscribe, use the last form field at: > https://lists.sourceforge.net/lists/listinfo/linux-usb-devel > _______________________________________________ [EMAIL PROTECTED] To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-devel
