Do you see that only on pxa250 B1 silicon? How about C0?
I only have B1 silicon, unfortunately. (Actually.. I might have later silicon in my h1910, but that's another can of worms, as I'm not certain of the status of linux on the h1910 yet.)
Yes, that's a C0 as I recall from your earlier questions ... :)
This is at 400MHz, btw. If you can
crank up to turbo mode 400mhz for a few minutes (assuming you can feed it enough current) to test, I'd be appreciative. Otherwise I'll play around with IPRness.
Boots just fine, NFS-over-USB, at 400 MHz. The reason to leave the clock lower was that smc91x didn't usually initialize with turbo mode, and the MTD/JFFS root wasn't working.
- Dave
------------------------------------------------------- This SF.net email is sponsored by OSDN developer relations Here's your chance to show off your extensive product knowledge We want to know what you know. Tell us and you have a chance to win $100 http://www.zoomerang.com/survey.zgi?HRPT1X3RYQNC5V4MLNSV3E54 _______________________________________________ [EMAIL PROTECTED] To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-devel
