On Wed, 12 May 2004 [EMAIL PROTECTED] wrote: > I've put in some debugging info to see where it gets to during the > cold-plug/unplug/hotplug process, and have included an edited version > of the /var/log/messages output during this time frame. > > Hopefully it might shed some light on the situation. > Sorry for its length.
I'm afraid it shows only that the controller was working initially. > Also, since I've been seeing a lot of msgs on the list regarding 'suspend' > and thats the last thing I see in the trace, make me wonder if its > not related. No, it's not related. Or not directly, anyhow. If all you care about is getting the thing to work, you can try simply removing the statements under the "case UHCI_RUNNING:" label in uhci_hcd.c:hc_state_transitions() -- just leave the "break" statement. Of course, that won't get you any nearer toward understanding what was wrong in the first place. Also it will prevent your computer from entering certain low-power-utilization modes. Have you been able to get the source code for the Knoppix kernel that worked successfully? Does comparison with the Fedora souce reveal anything? Alan Stern ------------------------------------------------------- This SF.Net email is sponsored by Sleepycat Software Learn developer strategies Cisco, Motorola, Ericsson & Lucent use to deliver higher performing products faster, at low TCO. http://www.sleepycat.com/telcomwpreg.php?From=osdnemail3 _______________________________________________ [EMAIL PROTECTED] To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-devel
