Hello list!
I hope it doesn't bother anyone of you guys that I post my problems here because I'm not a developer.
I have an USB soundcard that causes trouble. It's the Creative Audigy 2 NX USB, and I know that this beast is a pain in the ass because Creative doesn't really care to follow USB audio standards.
Anyway. I have a Gentoo box, kernel 2.6.7, a laptop with USB2 and hotplugging is running. When booting the box alsa loads and the device works. But then I unplug the USB cable of the Audigy and the trouble begins. The first thing I get is that no keyboard, neither the laptops own keyboard nor the plugged in Cherry USB keyboard, works anymore. I have to logout my user (closing the X session, not rebooting) and after I log in again both keyboards work again just fine.
The second thing is that alsa doesn't setup the Audigy again after replugging. But I guess this is a gentoo/script problem and shouldn't bother anyone here.
So, can this unplugging/keyboard not working problem be fixed or is it simply the Audigy's fault?
Further down you will find what dmesg has to say before and after unplugging.
Thanks for your attention
Sebastian
Jul 15 11:06:27 blood syslog-ng[6440]: syslog-ng version 1.6.4 starting
Jul 15 11:06:27 blood syslog-ng[6440]: Changing permissions on special file /dev/tty12
Jul 15 11:06:27 blood ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 10
Jul 15 11:06:27 blood ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10
Jul 15 11:06:27 blood ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 10
Jul 15 11:06:27 blood ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10
Jul 15 11:06:27 blood PCI: Using ACPI for IRQ routing
Jul 15 11:06:27 blood radeonfb: Invalid ROM signature 0 should be 0xaa55
Jul 15 11:06:27 blood radeonfb: Retreived PLL infos from BIOS
Jul 15 11:06:27 blood radeonfb: Reference=27.00 MHz (RefDiv=12) Memory=215.00 Mhz, System=200.00 MHz
Jul 15 11:06:27 blood Non-DDC laptop panel detected
Jul 15 11:06:27 blood radeonfb: Monitor 1 type LCD found
Jul 15 11:06:27 blood radeonfb: Monitor 2 type no found
Jul 15 11:06:27 blood radeonfb: panel ID string: LGP
Jul 15 11:06:27 blood radeonfb: detected LVDS panel size from BIOS: 1280x800
Jul 15 11:06:27 blood radeondb: BIOS provided dividers will be used
Jul 15 11:06:27 blood radeonfb: Power Management enabled for Mobility chipsets
Jul 15 11:06:27 blood radeonfb: ATI Radeon \a DDR SGRAM 64 MB
Jul 15 11:06:27 blood Simple Boot Flag at 0x37 set to 0x80
Jul 15 11:06:27 blood devfs: 2004-01-31 Richard Gooch ([EMAIL PROTECTED])
Jul 15 11:06:27 blood devfs: boot_options: 0x1
Jul 15 11:06:27 blood Initializing Cryptographic API
Jul 15 11:06:27 blood ACPI: AC Adapter [ACAD] (off-line)
Jul 15 11:06:27 blood ACPI: Battery Slot [BAT1] (battery present)
Jul 15 11:06:27 blood ACPI: Power Button (FF) [PWRF]
Jul 15 11:06:27 blood ACPI: Lid Switch [LID]
Jul 15 11:06:27 blood ACPI: Processor [CPU0] (supports C1 C2 C3, 8 throttling states)
Jul 15 11:06:27 blood mice: PS/2 mouse device common for all mice
Jul 15 11:06:27 blood i8042.c: Detected active multiplexing controller, rev 1.1.
Jul 15 11:06:27 blood serio: i8042 AUX0 port at 0x60,0x64 irq 12
Jul 15 11:06:27 blood serio: i8042 AUX1 port at 0x60,0x64 irq 12
Jul 15 11:06:27 blood serio: i8042 AUX2 port at 0x60,0x64 irq 12
Jul 15 11:06:27 blood serio: i8042 AUX3 port at 0x60,0x64 irq 12
Jul 15 11:06:27 blood Synaptics Touchpad, model: 1
Jul 15 11:06:27 blood Firmware: 5.9
Jul 15 11:06:27 blood Sensor: 18
Jul 15 11:06:27 blood new absolute packet format
Jul 15 11:06:27 blood Touchpad has extended capability bits
Jul 15 11:06:27 blood -> 4 multi-buttons, i.e. besides standard buttons
Jul 15 11:06:27 blood -> multifinger detection
Jul 15 11:06:27 blood -> palm detection
Jul 15 11:06:27 blood input: SynPS/2 Synaptics TouchPad on isa0060/serio4
Jul 15 11:06:27 blood serio: i8042 KBD port at 0x60,0x64 irq 1
Jul 15 11:06:27 blood input: AT Translated Set 2 keyboard on isa0060/serio0
Jul 15 11:06:27 blood Console: switching to colour frame buffer device 160x50
Jul 15 11:06:27 blood lp: driver loaded but no devices found
Jul 15 11:06:27 blood Real Time Clock Driver v1.12
Jul 15 11:06:27 blood Linux agpgart interface v0.100 (c) Dave Jones
Jul 15 11:06:27 blood agpgart: Detected an Intel 855PM Chipset.
Jul 15 11:06:27 blood agpgart: Maximum main memory to use for agp memory: 439M
Jul 15 11:06:27 blood agpgart: AGP aperture is 64M @ 0xb0000000
Jul 15 11:06:27 blood parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE]
Jul 15 11:06:27 blood parport0: irq 5 detected
Jul 15 11:06:27 blood lp0: using parport0 (polling).
Jul 15 11:06:27 blood Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
Jul 15 11:06:27 blood ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Jul 15 11:06:27 blood ICH4: IDE controller at PCI slot 0000:00:1f.1
Jul 15 11:06:27 blood PCI: Enabling device 0000:00:1f.1 (0005 -> 0007)
Jul 15 11:06:27 blood ICH4: chipset revision 3
Jul 15 11:06:27 blood ICH4: not 100% native mode: will probe irqs later
Jul 15 11:06:27 blood ide0: BM-DMA at 0x1100-0x1107, BIOS settings: hda:DMA, hdb:pio
Jul 15 11:06:27 blood ide1: BM-DMA at 0x1108-0x110f, BIOS settings: hdc:DMA, hdd:pio
Jul 15 11:06:27 blood hda: TOSHIBA MK4025GAS, ATA DISK drive
Jul 15 11:06:27 blood Using anticipatory io scheduler
Jul 15 11:06:27 blood ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Jul 15 11:06:27 blood hdc: MATSHITACD-RW CW-8123, ATAPI CD/DVD-ROM drive
Jul 15 11:06:27 blood ide1 at 0x170-0x177,0x376 on irq 15
Jul 15 11:06:27 blood hda: max request size: 128KiB
Jul 15 11:06:27 blood hda: 78140160 sectors (40007 MB), CHS=65535/16/63, UDMA(100)
Jul 15 11:06:27 blood /dev/ide/host0/bus0/target0/lun0: p1 p2 p3 p4
Jul 15 11:06:27 blood hdc: ATAPI 24X DVD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
Jul 15 11:06:27 blood Uniform CD-ROM driver Revision: 3.20
Jul 15 11:06:27 blood NET: Registered protocol family 2
Jul 15 11:06:27 blood IP: routing cache hash table of 4096 buckets, 32Kbytes
Jul 15 11:06:27 blood TCP: Hash tables configured (established 32768 bind 65536)
Jul 15 11:06:27 blood NET: Registered protocol family 1
Jul 15 11:06:27 blood NET: Registered protocol family 17
Jul 15 11:06:27 blood speedstep-centrino: found "Intel(R) Pentium(R) M processor 1400MHz": max frequency: 1400000kHz
Jul 15 11:06:27 blood ReiserFS: hda3: found reiserfs format "3.6" with standard journal
Jul 15 11:06:27 blood ReiserFS: hda3: using ordered data mode
Jul 15 11:06:27 blood ReiserFS: hda3: journal params: device hda3, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
Jul 15 11:06:27 blood ReiserFS: hda3: checking transaction log (hda3)
Jul 15 11:06:27 blood ReiserFS: hda3: Using r5 hash to sort names
Jul 15 11:06:27 blood VFS: Mounted root (reiserfs filesystem) readonly.
Jul 15 11:06:27 blood Mounted devfs on /dev
Jul 15 11:06:27 blood Freeing unused kernel memory: 136k freed
Jul 15 11:06:27 blood Adding 996020k swap on /dev/hda2. Priority:-1 extents:1
Jul 15 11:06:27 blood ieee80211_crypt: registered algorithm 'NULL'
Jul 15 11:06:27 blood ieee80211: loading with WEP enabled.
Jul 15 11:06:27 blood ipw2100: Intel(R) PRO/Wireless 2100 Network Driver, 0.49
Jul 15 11:06:27 blood ipw2100: Copyright(c) 2003-2004 Intel Corporation
Jul 15 11:06:27 blood Detected ipw2100 PCI device at 0000:02:02.0, mem: 0xD0000000-0xD0000FFF -> e197e000, irq: 10
Jul 15 11:06:27 blood eth0: Using hotplug firmware load.
Jul 15 11:06:27 blood Registered as eth0
Jul 15 11:06:27 blood usbcore: registered new driver usbfs
Jul 15 11:06:27 blood usbcore: registered new driver hub
Jul 15 11:06:27 blood usbcore: registered new driver usbhid
Jul 15 11:06:27 blood drivers/usb/input/hid-core.c: v2.0:USB HID core driver
Jul 15 11:06:27 blood USB Universal Host Controller Interface driver v2.2
Jul 15 11:06:27 blood uhci_hcd 0000:00:1d.0: Intel Corp. 82801DB (ICH4) USB UHCI #1
Jul 15 11:06:27 blood PCI: Setting latency timer of device 0000:00:1d.0 to 64
Jul 15 11:06:27 blood uhci_hcd 0000:00:1d.0: irq 10, io base 00001200
Jul 15 11:06:27 blood uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
Jul 15 11:06:27 blood uhci_hcd 0000:00:1d.0: detected 2 ports
Jul 15 11:06:27 blood usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1
Jul 15 11:06:27 blood usb usb1: default language 0x0409
Jul 15 11:06:27 blood usb usb1: Product: Intel Corp. 82801DB (ICH4) USB UHCI #1
Jul 15 11:06:27 blood usb usb1: Manufacturer: Linux 2.6.7-gentoo-r10 uhci_hcd
Jul 15 11:06:27 blood usb usb1: SerialNumber: 0000:00:1d.0
Jul 15 11:06:27 blood usb usb1: hotplug
Jul 15 11:06:27 blood usb usb1: adding 1-0:1.0 (config #1, interface 0)
Jul 15 11:06:27 blood usb 1-0:1.0: hotplug
Jul 15 11:06:27 blood hub 1-0:1.0: usb_probe_interface
Jul 15 11:06:27 blood hub 1-0:1.0: usb_probe_interface - got id
Jul 15 11:06:27 blood hub 1-0:1.0: USB hub found
Jul 15 11:06:27 blood hub 1-0:1.0: 2 ports detected
Jul 15 11:06:27 blood hub 1-0:1.0: standalone hub
Jul 15 11:06:27 blood hub 1-0:1.0: no power switching (usb 1.0)
Jul 15 11:06:27 blood hub 1-0:1.0: individual port over-current protection
Jul 15 11:06:27 blood hub 1-0:1.0: power on to power good time: 2ms
Jul 15 11:06:27 blood hub 1-0:1.0: local power source is good
Jul 15 11:06:27 blood uhci_hcd 0000:00:1d.1: Intel Corp. 82801DB (ICH4) USB UHCI #2
Jul 15 11:06:27 blood PCI: Setting latency timer of device 0000:00:1d.1 to 64
Jul 15 11:06:27 blood uhci_hcd 0000:00:1d.1: irq 10, io base 00001600
Jul 15 11:06:27 blood uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
Jul 15 11:06:27 blood uhci_hcd 0000:00:1d.1: detected 2 ports
Jul 15 11:06:27 blood usb usb2: new device strings: Mfr=3, Product=2, SerialNumber=1
Jul 15 11:06:27 blood usb usb2: default language 0x0409
Jul 15 11:06:27 blood usb usb2: Product: Intel Corp. 82801DB (ICH4) USB UHCI #2
Jul 15 11:06:27 blood usb usb2: Manufacturer: Linux 2.6.7-gentoo-r10 uhci_hcd
Jul 15 11:06:27 blood usb usb2: SerialNumber: 0000:00:1d.1
Jul 15 11:06:27 blood usb usb2: hotplug
Jul 15 11:06:27 blood usb usb2: adding 2-0:1.0 (config #1, interface 0)
Jul 15 11:06:27 blood usb 2-0:1.0: hotplug
Jul 15 11:06:27 blood hub 2-0:1.0: usb_probe_interface
Jul 15 11:06:27 blood hub 2-0:1.0: usb_probe_interface - got id
Jul 15 11:06:27 blood hub 2-0:1.0: USB hub found
Jul 15 11:06:27 blood hub 2-0:1.0: 2 ports detected
Jul 15 11:06:27 blood hub 2-0:1.0: standalone hub
Jul 15 11:06:27 blood hub 2-0:1.0: no power switching (usb 1.0)
Jul 15 11:06:27 blood hub 2-0:1.0: individual port over-current protection
Jul 15 11:06:27 blood hub 2-0:1.0: power on to power good time: 2ms
Jul 15 11:06:27 blood hub 2-0:1.0: local power source is good
Jul 15 11:06:27 blood uhci_hcd 0000:00:1d.2: Intel Corp. 82801DB (ICH4) USB UHCI #3
Jul 15 11:06:27 blood PCI: Setting latency timer of device 0000:00:1d.2 to 64
Jul 15 11:06:27 blood uhci_hcd 0000:00:1d.2: irq 10, io base 00001700
Jul 15 11:06:27 blood uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
Jul 15 11:06:27 blood uhci_hcd 0000:00:1d.2: detected 2 ports
Jul 15 11:06:27 blood usb usb3: new device strings: Mfr=3, Product=2, SerialNumber=1
Jul 15 11:06:27 blood usb usb3: default language 0x0409
Jul 15 11:06:27 blood usb usb3: Product: Intel Corp. 82801DB (ICH4) USB UHCI #3
Jul 15 11:06:27 blood usb usb3: Manufacturer: Linux 2.6.7-gentoo-r10 uhci_hcd
Jul 15 11:06:27 blood usb usb3: SerialNumber: 0000:00:1d.2
Jul 15 11:06:27 blood usb usb3: hotplug
Jul 15 11:06:27 blood uhci_hcd 0000:00:1d.0: port 1 portsc 0093
Jul 15 11:06:27 blood hub 1-0:1.0: port 1, status 0101, change 0001, 12 Mb/s
Jul 15 11:06:27 blood usb usb3: adding 3-0:1.0 (config #1, interface 0)
Jul 15 11:06:27 blood usb 3-0:1.0: hotplug
Jul 15 11:06:27 blood hub 3-0:1.0: usb_probe_interface
Jul 15 11:06:27 blood hub 3-0:1.0: usb_probe_interface - got id
Jul 15 11:06:27 blood hub 3-0:1.0: USB hub found
Jul 15 11:06:27 blood hub 3-0:1.0: 2 ports detected
Jul 15 11:06:27 blood hub 3-0:1.0: standalone hub
Jul 15 11:06:27 blood hub 3-0:1.0: no power switching (usb 1.0)
Jul 15 11:06:27 blood hub 3-0:1.0: individual port over-current protection
Jul 15 11:06:27 blood hub 3-0:1.0: power on to power good time: 2ms
Jul 15 11:06:27 blood hub 3-0:1.0: local power source is good
Jul 15 11:06:27 blood ehci_hcd: block sizes: qh 128 qtd 96 itd 192 sitd 96
Jul 15 11:06:27 blood ehci_hcd 0000:00:1d.7: Intel Corp. 82801DB (ICH4) USB2 EHCI Controller
Jul 15 11:06:27 blood ehci_hcd 0000:00:1d.7: reset hcs_params 0x103206 dbg=1 cc=3 pcc=2 ordered !ppc ports=6
Jul 15 11:06:27 blood ehci_hcd 0000:00:1d.7: reset hcc_params 6871 thresh 7 uframes 1024 64 bit addr
Jul 15 11:06:27 blood ehci_hcd 0000:00:1d.7: capability 0001 at 68
Jul 15 11:06:27 blood PCI: Setting latency timer of device 0000:00:1d.7 to 64
Jul 15 11:06:27 blood ehci_hcd 0000:00:1d.7: irq 10, pci mem e1985000
Jul 15 11:06:27 blood ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 4
Jul 15 11:06:27 blood ehci_hcd 0000:00:1d.7: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT
Jul 15 11:06:27 blood PCI: cache line size of 32 is not supported by device 0000:00:1d.7
Jul 15 11:06:27 blood ehci_hcd 0000:00:1d.7: init command 010001 (park)=0 ithresh=1 period=1024 RUN
Jul 15 11:06:27 blood ehci_hcd 0000:00:1d.7: USB 2.0 enabled, EHCI 1.00, driver 2004-May-10
Jul 15 11:06:27 blood ehci_hcd 0000:00:1d.7: supports USB remote wakeup
Jul 15 11:06:27 blood usb usb4: new device strings: Mfr=3, Product=2, SerialNumber=1
Jul 15 11:06:27 blood usb usb4: default language 0x0409
Jul 15 11:06:27 blood usb usb4: Product: Intel Corp. 82801DB (ICH4) USB2 EHCI Controller
Jul 15 11:06:27 blood usb usb4: Manufacturer: Linux 2.6.7-gentoo-r10 ehci_hcd
Jul 15 11:06:27 blood usb usb4: SerialNumber: 0000:00:1d.7
Jul 15 11:06:27 blood usb usb4: hotplug
Jul 15 11:06:27 blood uhci_hcd 0000:00:1d.0: port 1 portsc 0082
Jul 15 11:06:27 blood usb usb4: adding 4-0:1.0 (config #1, interface 0)
Jul 15 11:06:27 blood usb 4-0:1.0: hotplug
Jul 15 11:06:27 blood hub 4-0:1.0: usb_probe_interface
Jul 15 11:06:27 blood hub 4-0:1.0: usb_probe_interface - got id
Jul 15 11:06:27 blood hub 4-0:1.0: USB hub found
Jul 15 11:06:27 blood hub 4-0:1.0: 6 ports detected
Jul 15 11:06:27 blood hub 4-0:1.0: standalone hub
Jul 15 11:06:27 blood hub 4-0:1.0: ganged power switching
Jul 15 11:06:27 blood hub 4-0:1.0: individual port over-current protection
Jul 15 11:06:27 blood hub 4-0:1.0: Single TT
Jul 15 11:06:27 blood hub 4-0:1.0: TT requires at most 8 FS bit times
Jul 15 11:06:27 blood hub 4-0:1.0: power on to power good time: 20ms
Jul 15 11:06:27 blood hub 4-0:1.0: local power source is good
Jul 15 11:06:27 blood hub 4-0:1.0: enabling power on all ports
Jul 15 11:06:27 blood ReiserFS: hda4: found reiserfs format "3.6" with standard journal
Jul 15 11:06:27 blood hub 1-0:1.0: debounce: port 1: delay 400ms stable 0 status 0x100
Jul 15 11:06:27 blood hub 1-0:1.0: connect-debounce failed, port 1 disabled
Jul 15 11:06:27 blood uhci_hcd 0000:00:1d.0: port 2 portsc 0082
Jul 15 11:06:27 blood hub 1-0:1.0: port 2, status 0100, change 0001, 12 Mb/s
Jul 15 11:06:27 blood ehci_hcd 0000:00:1d.7: GetStatus port 1 status 001803 POWER sig=j CSC CONNECT
Jul 15 11:06:27 blood hub 4-0:1.0: port 1, status 0501, change 0001, 480 Mb/s
Jul 15 11:06:27 blood hub 4-0:1.0: debounce: port 1: delay 100ms stable 4 status 0x501
Jul 15 11:06:27 blood hub 4-0:1.0: port 1 not reset yet, waiting 50ms
Jul 15 11:06:27 blood ehci_hcd 0000:00:1d.7: port 1 full speed --> companion
Jul 15 11:06:27 blood ehci_hcd 0000:00:1d.7: GetStatus port 1 status 003801 POWER OWNER sig=j CONNECT
Jul 15 11:06:27 blood ehci_hcd 0000:00:1d.7: GetStatus port 2 status 001403 POWER sig=k CSC CONNECT
Jul 15 11:06:27 blood hub 4-0:1.0: port 2, status 0501, change 0001, 480 Mb/s
Jul 15 11:06:27 blood hub 4-0:1.0: debounce: port 2: delay 100ms stable 4 status 0x501
Jul 15 11:06:27 blood ehci_hcd 0000:00:1d.7: port 2 low speed --> companion
Jul 15 11:06:27 blood ehci_hcd 0000:00:1d.7: GetStatus port 2 status 003002 POWER OWNER sig=se0 CSC
Jul 15 11:06:27 blood ehci_hcd 0000:00:1d.7: GetStatus port 5 status 001403 POWER sig=k CSC CONNECT
Jul 15 11:06:27 blood hub 4-0:1.0: port 5, status 0501, change 0001, 480 Mb/s
Jul 15 11:06:27 blood hub 4-0:1.0: debounce: port 5: delay 100ms stable 4 status 0x501
Jul 15 11:06:27 blood ehci_hcd 0000:00:1d.7: port 5 low speed --> companion
Jul 15 11:06:27 blood ehci_hcd 0000:00:1d.7: GetStatus port 5 status 003002 POWER OWNER sig=se0 CSC
Jul 15 11:06:27 blood ehci_hcd 0000:00:1d.7: GetStatus port 1 status 003002 POWER OWNER sig=se0 CSC
Jul 15 11:06:27 blood hub 4-0:1.0: port 1, status 0000, change 0001, 12 Mb/s
Jul 15 11:06:27 blood ehci_hcd 0000:00:1d.7: GetStatus port 2 status 003002 POWER OWNER sig=se0 CSC
Jul 15 11:06:27 blood hub 4-0:1.0: port 2, status 0000, change 0001, 12 Mb/s
Jul 15 11:06:27 blood ehci_hcd 0000:00:1d.7: GetStatus port 5 status 003002 POWER OWNER sig=se0 CSC
Jul 15 11:06:27 blood hub 4-0:1.0: port 5, status 0000, change 0001, 12 Mb/s
Jul 15 11:06:27 blood uhci_hcd 0000:00:1d.2: port 1 portsc 01a3
Jul 15 11:06:27 blood hub 3-0:1.0: port 1, status 0301, change 0001, 1.5 Mb/s
Jul 15 11:06:27 blood hub 3-0:1.0: debounce: port 1: delay 100ms stable 4 status 0x301
Jul 15 11:06:27 blood usb 3-1: new low speed USB device using address 2
Jul 15 11:06:27 blood usb 3-1: skipped 1 descriptor after interface
Jul 15 11:06:27 blood usb 3-1: new device strings: Mfr=1, Product=3, SerialNumber=0
Jul 15 11:06:27 blood usb 3-1: default language 0x0409
Jul 15 11:06:27 blood usb 3-1: Product: Microsoft 3-Button Mouse with IntelliEye(TM)
Jul 15 11:06:27 blood usb 3-1: Manufacturer: Microsoft
Jul 15 11:06:27 blood usb 3-1: hotplug
Jul 15 11:06:27 blood usb 3-1: adding 3-1:1.0 (config #1, interface 0)
Jul 15 11:06:27 blood usb 3-1:1.0: hotplug
Jul 15 11:06:27 blood usbhid 3-1:1.0: usb_probe_interface
Jul 15 11:06:27 blood usbhid 3-1:1.0: usb_probe_interface - got id
Jul 15 11:06:27 blood input: USB HID v1.10 Mouse [Microsoft Microsoft 3-Button Mouse with IntelliEye(TM)] on usb-0000:00:1d.2-1
Jul 15 11:06:27 blood uhci_hcd 0000:00:1d.0: port 1 portsc 0093
Jul 15 11:06:27 blood hub 1-0:1.0: port 1, status 0101, change 0001, 12 Mb/s
Jul 15 11:06:27 blood hub 1-0:1.0: debounce: port 1: delay 100ms stable 4 status 0x101
Jul 15 11:06:27 blood usb 1-1: new full speed USB device using address 2
Jul 15 11:06:27 blood usb 1-1: skipped 25 descriptors after interface
Jul 15 11:06:27 blood usb 1-1: skipped 2 descriptors after interface
Jul 15 11:06:27 blood usb 1-1: skipped 1 descriptor after endpoint
Jul 15 11:06:27 blood usb 1-1: skipped 2 descriptors after interface
Jul 15 11:06:27 blood usb 1-1: skipped 1 descriptor after endpoint
Jul 15 11:06:27 blood usb 1-1: skipped 2 descriptors after interface
Jul 15 11:06:27 blood usb 1-1: skipped 1 descriptor after endpoint
Jul 15 11:06:27 blood usb 1-1: skipped 2 descriptors after interface
Jul 15 11:06:27 blood usb 1-1: skipped 1 descriptor after endpoint
Jul 15 11:06:27 blood usb 1-1: skipped 2 descriptors after interface
Jul 15 11:06:27 blood usb 1-1: skipped 1 descriptor after endpoint
Jul 15 11:06:27 blood usb 1-1: skipped 2 descriptors after interface
Jul 15 11:06:27 blood usb 1-1: skipped 1 descriptor after endpoint
Jul 15 11:06:27 blood usb 1-1: skipped 2 descriptors after interface
Jul 15 11:06:27 blood usb 1-1: skipped 1 descriptor after endpoint
Jul 15 11:06:27 blood usb 1-1: skipped 2 descriptors after interface
Jul 15 11:06:27 blood usb 1-1: skipped 1 descriptor after endpoint
Jul 15 11:06:27 blood usb 1-1: skipped 2 descriptors after interface
Jul 15 11:06:27 blood usb 1-1: skipped 1 descriptor after endpoint
Jul 15 11:06:27 blood usb 1-1: skipped 2 descriptors after interface
Jul 15 11:06:27 blood usb 1-1: skipped 1 descriptor after endpoint
Jul 15 11:06:27 blood usb 1-1: skipped 2 descriptors after interface
Jul 15 11:06:27 blood usb 1-1: skipped 1 descriptor after endpoint
Jul 15 11:06:27 blood usb 1-1: skipped 2 descriptors after interface
Jul 15 11:06:27 blood usb 1-1: skipped 1 descriptor after endpoint
Jul 15 11:06:27 blood usb 1-1: skipped 2 descriptors after interface
Jul 15 11:06:27 blood usb 1-1: skipped 1 descriptor after endpoint
Jul 15 11:06:27 blood usb 1-1: skipped 2 descriptors after interface
Jul 15 11:06:27 blood usb 1-1: skipped 1 descriptor after endpoint
Jul 15 11:06:27 blood usb 1-1: skipped 2 descriptors after interface
Jul 15 11:06:27 blood usb 1-1: skipped 1 descriptor after endpoint
Jul 15 11:06:27 blood usb 1-1: skipped 2 descriptors after interface
Jul 15 11:06:27 blood usb 1-1: skipped 1 descriptor after endpoint
Jul 15 11:06:27 blood usb 1-1: skipped 2 descriptors after interface
Jul 15 11:06:27 blood usb 1-1: skipped 1 descriptor after endpoint
Jul 15 11:06:27 blood usb 1-1: skipped 2 descriptors after interface
Jul 15 11:06:27 blood usb 1-1: skipped 1 descriptor after endpoint
Jul 15 11:06:27 blood usb 1-1: skipped 2 descriptors after interface
Jul 15 11:06:27 blood usb 1-1: skipped 1 descriptor after endpoint
Jul 15 11:06:27 blood usb 1-1: skipped 2 descriptors after interface
Jul 15 11:06:27 blood usb 1-1: skipped 1 descriptor after endpoint
Jul 15 11:06:27 blood usb 1-1: skipped 2 descriptors after interface
Jul 15 11:06:27 blood usb 1-1: skipped 1 descriptor after endpoint
Jul 15 11:06:27 blood usb 1-1: skipped 2 descriptors after interface
Jul 15 11:06:27 blood usb 1-1: skipped 1 descriptor after endpoint
Jul 15 11:06:27 blood usb 1-1: skipped 2 descriptors after interface
Jul 15 11:06:27 blood usb 1-1: skipped 1 descriptor after endpoint
Jul 15 11:06:27 blood usb 1-1: new device strings: Mfr=1, Product=2, SerialNumber=0
Jul 15 11:06:27 blood usb 1-1: default language 0x0409
Jul 15 11:06:27 blood usb 1-1: Product: SB Audigy 2 NX
Jul 15 11:06:27 blood usb 1-1: Manufacturer: Creative Technology Ltd
Jul 15 11:06:27 blood usb 1-1: hotplug
Jul 15 11:06:27 blood usb 1-1: adding 1-1:1.0 (config #1, interface 0)
Jul 15 11:06:27 blood usb 1-1:1.0: hotplug
Jul 15 11:06:27 blood usbcore: registered new driver snd-usb-audio
Jul 15 11:06:27 blood snd-usb-audio 1-1:1.0: usb_probe_interface
Jul 15 11:06:27 blood snd-usb-audio 1-1:1.0: usb_probe_interface - got id
Jul 15 11:06:27 blood uhci_hcd 0000:00:1d.1: suspend_hc
Jul 15 11:06:27 blood usb 1-1: adding 1-1:1.1 (config #1, interface 1)
Jul 15 11:06:27 blood usb 1-1:1.1: hotplug
Jul 15 11:06:27 blood usb 1-1: adding 1-1:1.2 (config #1, interface 2)
Jul 15 11:06:27 blood usb 1-1:1.2: hotplug
Jul 15 11:06:27 blood uhci_hcd 0000:00:1d.0: port 2 portsc 01a3
Jul 15 11:06:27 blood hub 1-0:1.0: port 2, status 0301, change 0001, 1.5 Mb/s
Jul 15 11:06:27 blood hub 1-0:1.0: debounce: port 2: delay 100ms stable 4 status 0x301
Jul 15 11:06:27 blood usb 1-2: new low speed USB device using address 3
Jul 15 11:06:27 blood usb 1-2: skipped 1 descriptor after interface
Jul 15 11:06:27 blood usb 1-2: new device strings: Mfr=0, Product=0, SerialNumber=0
Jul 15 11:06:27 blood usb 1-2: hotplug
Jul 15 11:06:27 blood usb 1-2: adding 1-2:1.0 (config #1, interface 0)
Jul 15 11:06:27 blood usb 1-2:1.0: hotplug
Jul 15 11:06:27 blood usbhid 1-2:1.0: usb_probe_interface
Jul 15 11:06:27 blood usbhid 1-2:1.0: usb_probe_interface - got id
Jul 15 11:06:27 blood input: USB HID v1.00 Keyboard [046a:0001] on usb-0000:00:1d.0-2
Jul 15 11:06:27 blood ReiserFS: hda4: using ordered data mode
Jul 15 11:06:27 blood ReiserFS: hda4: journal params: device hda4, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
Jul 15 11:06:27 blood ReiserFS: hda4: checking transaction log (hda4)
Jul 15 11:06:27 blood ReiserFS: hda4: Using r5 hash to sort names
Jul 15 11:06:27 blood ieee80211_crypt: registered algorithm 'WEP'
Jul 15 11:06:27 blood eth0: Associated with 'juggernaut' at 11Mbps, channel 11
Jul 15 11:06:29 blood eth0: Association lost.
Jul 15 11:06:31 blood eth0: Associated with 'juggernaut' at 11Mbps, channel 11
Jul 15 11:06:31 blood portmap[7582]: user rpc not found, reverting to user bin
Jul 15 11:06:33 blood cron[7807]: (CRON) STARTUP (fork ok)
Jul 15 11:06:33 blood init: Activating demand-procedures for 'A'
Jul 15 11:06:38 blood devfsd[351]: error calling: "unlink" in "GLOBAL"
Jul 15 11:06:38 blood devfsd[351]: error calling: "unlink" in "GLOBAL"
Jul 15 11:06:39 blood [drm] Initialized radeon 1.11.0 20020828 on minor 0: ATI Technologies Inc RV250 5c61 [Radeon Mobility 9200 M9+]
Jul 15 11:06:39 blood agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
Jul 15 11:06:39 blood agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode
Jul 15 11:06:39 blood agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode
Jul 15 11:06:39 blood [drm] Loading R200 Microcode
Jul 15 11:06:39 blood drivers/usb/input/hid-input.c: event field not found
Jul 15 11:06:53 blood gdm(pam_unix)[7939]: session opened for user sk by (uid=0)
Jul 15 11:06:55 blood (sk-8204): (Version 2.6.0) wird gestartet, Prozesskennung 8204, Benutzer �sk�
Jul 15 11:06:55 blood (sk-8204): Die Adresse �xml:readonly:/etc/gconf/gconf.xml.mandatory� wurde an der Position 0 zu einer nur lesbaren Konfigurationsquelle aufgel�st
Jul 15 11:06:55 blood (sk-8204): Die Adresse �xml:readwrite:/home/sk/.gconf� wurde an der Position 1 zu einer schreibbaren Konfigurationsquelle aufgel�st
Jul 15 11:06:55 blood (sk-8204): Die Adresse �xml:readonly:/etc/gconf/gconf.xml.defaults� wurde an der Position 2 zu einer nur lesbaren Konfigurationsquelle aufgel�st
Jul 15 11:06:57 blood (sk-8209): iid OAFIID:BrokenNoType:20000808 has a NULL type
Jul 15 11:06:57 blood (sk-8209): invalid character '#' in iid 'OAFIID:This#!!%$iid%^$%_|~!OAFIID_ContainsBadChars'
Jul 15 11:09:43 blood uhci_hcd 0000:00:1d.0: port 1 portsc 008a !!!!!!!!!!!!!!!!!! Here I unplugged the beast !!!!!!!!!!!!!!!!!!!!
Jul 15 11:09:43 blood hub 1-0:1.0: port 1, status 0100, change 0003, 12 Mb/s
Jul 15 11:09:43 blood usb 1-1: USB disconnect, address 2
Jul 15 11:09:43 blood usb 1-1: usb_disable_device nuking all URBs
Jul 15 11:09:43 blood usb 1-1: unregistering interface 1-1:1.0
Jul 15 11:09:43 blood usb 1-1:1.0: hotplug
Jul 15 11:09:43 blood usb 1-1: unregistering interface 1-1:1.1
Jul 15 11:09:43 blood usb 1-1:1.1: hotplug
Jul 15 11:09:43 blood usb 1-1: unregistering interface 1-1:1.2
Jul 15 11:09:43 blood usb 1-1:1.2: hotplug
Jul 15 11:09:43 blood usb 1-1: unregistering device
Jul 15 11:09:43 blood usb 1-1: hotplug
Jul 15 11:09:43 blood ehci_hcd 0000:00:1d.7: GetStatus port 1 status 001002 POWER sig=se0 CSC
Jul 15 11:09:43 blood hub 4-0:1.0: port 1, status 0100, change 0001, 12 Mb/s
Jul 15 11:09:43 blood ehci_hcd 0000:00:1d.7: GetStatus port 2 status 003002 POWER OWNER sig=se0 CSC
Jul 15 11:09:43 blood hub 4-0:1.0: port 2, status 0000, change 0001, 12 Mb/s
Jul 15 11:09:43 blood ehci_hcd 0000:00:1d.7: GetStatus port 5 status 003002 POWER OWNER sig=se0 CSC
Jul 15 11:09:43 blood hub 4-0:1.0: port 5, status 0000, change 0001, 12 Mb/s
Jul 15 11:09:43 blood uhci_hcd 0000:00:1d.0: port 1 portsc 0088
Jul 15 11:09:43 blood hub 1-0:1.0: port 1 enable change, status 00000100
Jul 15 11:09:59 blood (sk-8204): Beenden
Jul 15 11:09:59 blood gdm(pam_unix)[7939]: session closed for user sk
Jul 15 11:10:00 blood CRON[8632]: (root) CMD (test -x /usr/sbin/run-crons && /usr/sbin/run-crons )
Jul 15 11:10:00 blood agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
Jul 15 11:10:00 blood agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode
Jul 15 11:10:00 blood agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode
Jul 15 11:10:00 blood [drm] Loading R200 Microcode
Jul 15 11:10:10 blood gdm(pam_unix)[7939]: session opened for user sk by (uid=0)
Jul 15 11:10:11 blood (sk-8850): (Version 2.6.0) wird gestartet, Prozesskennung 8850, Benutzer �sk�
Jul 15 11:10:11 blood (sk-8850): Die Adresse �xml:readonly:/etc/gconf/gconf.xml.mandatory� wurde an der Position 0 zu einer nur lesbaren Konfigurationsquelle aufgel�st
Jul 15 11:10:11 blood (sk-8850): Die Adresse �xml:readwrite:/home/sk/.gconf� wurde an der Position 1 zu einer schreibbaren Konfigurationsquelle aufgel�st
Jul 15 11:10:11 blood (sk-8850): Die Adresse �xml:readonly:/etc/gconf/gconf.xml.defaults� wurde an der Position 2 zu einer nur lesbaren Konfigurationsquelle aufgel�st
Jul 15 11:10:25 blood ehci_hcd 0000:00:1d.7: GetStatus port 1 status 001803 POWER sig=j CSC CONNECT
Jul 15 11:10:25 blood hub 4-0:1.0: port 1, status 0501, change 0001, 480 Mb/s
Jul 15 11:10:25 blood hub 4-0:1.0: debounce: port 1: delay 100ms stable 4 status 0x501
Jul 15 11:10:25 blood hub 4-0:1.0: port 1 not reset yet, waiting 50ms
Jul 15 11:10:25 blood ehci_hcd 0000:00:1d.7: port 1 full speed --> companion
Jul 15 11:10:25 blood ehci_hcd 0000:00:1d.7: GetStatus port 1 status 003801 POWER OWNER sig=j CONNECT
Jul 15 11:10:25 blood ehci_hcd 0000:00:1d.7: GetStatus port 2 status 003002 POWER OWNER sig=se0 CSC
Jul 15 11:10:25 blood hub 4-0:1.0: port 2, status 0000, change 0001, 12 Mb/s
Jul 15 11:10:25 blood ehci_hcd 0000:00:1d.7: GetStatus port 5 status 003002 POWER OWNER sig=se0 CSC
Jul 15 11:10:25 blood hub 4-0:1.0: port 5, status 0000, change 0001, 12 Mb/s
Jul 15 11:10:25 blood uhci_hcd 0000:00:1d.0: port 1 portsc 0093
Jul 15 11:10:25 blood hub 1-0:1.0: port 1, status 0101, change 0001, 12 Mb/s
Jul 15 11:10:25 blood hub 1-0:1.0: debounce: port 1: delay 100ms stable 4 status 0x101
Jul 15 11:10:25 blood usb 1-1: new full speed USB device using address 4
Jul 15 11:10:25 blood usb 1-1: skipped 25 descriptors after interface
Jul 15 11:10:25 blood usb 1-1: skipped 2 descriptors after interface
Jul 15 11:10:25 blood usb 1-1: skipped 1 descriptor after endpoint
Jul 15 11:10:25 blood usb 1-1: skipped 2 descriptors after interface
Jul 15 11:10:25 blood usb 1-1: skipped 1 descriptor after endpoint
Jul 15 11:10:25 blood usb 1-1: skipped 2 descriptors after interface
Jul 15 11:10:25 blood usb 1-1: skipped 1 descriptor after endpoint
Jul 15 11:10:25 blood usb 1-1: skipped 2 descriptors after interface
Jul 15 11:10:25 blood usb 1-1: skipped 1 descriptor after endpoint
Jul 15 11:10:25 blood usb 1-1: skipped 2 descriptors after interface
Jul 15 11:10:25 blood usb 1-1: skipped 1 descriptor after endpoint
Jul 15 11:10:25 blood usb 1-1: skipped 2 descriptors after interface
Jul 15 11:10:25 blood usb 1-1: skipped 1 descriptor after endpoint
Jul 15 11:10:25 blood usb 1-1: skipped 2 descriptors after interface
Jul 15 11:10:25 blood usb 1-1: skipped 1 descriptor after endpoint
Jul 15 11:10:25 blood usb 1-1: skipped 2 descriptors after interface
Jul 15 11:10:25 blood usb 1-1: skipped 1 descriptor after endpoint
Jul 15 11:10:25 blood usb 1-1: skipped 2 descriptors after interface
Jul 15 11:10:25 blood usb 1-1: skipped 1 descriptor after endpoint
Jul 15 11:10:25 blood usb 1-1: skipped 2 descriptors after interface
Jul 15 11:10:25 blood usb 1-1: skipped 1 descriptor after endpoint
Jul 15 11:10:25 blood usb 1-1: skipped 2 descriptors after interface
Jul 15 11:10:25 blood usb 1-1: skipped 1 descriptor after endpoint
Jul 15 11:10:25 blood usb 1-1: skipped 2 descriptors after interface
Jul 15 11:10:25 blood usb 1-1: skipped 1 descriptor after endpoint
Jul 15 11:10:25 blood usb 1-1: skipped 2 descriptors after interface
Jul 15 11:10:25 blood usb 1-1: skipped 1 descriptor after endpoint
Jul 15 11:10:25 blood usb 1-1: skipped 2 descriptors after interface
Jul 15 11:10:25 blood usb 1-1: skipped 1 descriptor after endpoint
Jul 15 11:10:25 blood usb 1-1: skipped 2 descriptors after interface
Jul 15 11:10:25 blood usb 1-1: skipped 1 descriptor after endpoint
Jul 15 11:10:25 blood usb 1-1: skipped 2 descriptors after interface
Jul 15 11:10:25 blood usb 1-1: skipped 1 descriptor after endpoint
Jul 15 11:10:25 blood usb 1-1: skipped 2 descriptors after interface
Jul 15 11:10:25 blood usb 1-1: skipped 1 descriptor after endpoint
Jul 15 11:10:25 blood usb 1-1: skipped 2 descriptors after interface
Jul 15 11:10:25 blood usb 1-1: skipped 1 descriptor after endpoint
Jul 15 11:10:25 blood usb 1-1: skipped 2 descriptors after interface
Jul 15 11:10:25 blood usb 1-1: skipped 1 descriptor after endpoint
Jul 15 11:10:25 blood usb 1-1: skipped 2 descriptors after interface
Jul 15 11:10:25 blood usb 1-1: skipped 1 descriptor after endpoint
Jul 15 11:10:25 blood usb 1-1: skipped 2 descriptors after interface
Jul 15 11:10:25 blood usb 1-1: skipped 1 descriptor after endpoint
Jul 15 11:10:25 blood usb 1-1: skipped 2 descriptors after interface
Jul 15 11:10:25 blood usb 1-1: skipped 1 descriptor after endpoint
Jul 15 11:10:25 blood usb 1-1: skipped 2 descriptors after interface
Jul 15 11:10:25 blood usb 1-1: skipped 1 descriptor after endpoint
Jul 15 11:10:25 blood usb 1-1: new device strings: Mfr=1, Product=2, SerialNumber=0
Jul 15 11:10:25 blood usb 1-1: default language 0x0409
Jul 15 11:10:25 blood usb 1-1: Product: SB Audigy 2 NX
Jul 15 11:10:25 blood usb 1-1: Manufacturer: Creative Technology Ltd
Jul 15 11:10:25 blood usb 1-1: hotplug
Jul 15 11:10:25 blood usb 1-1: adding 1-1:1.0 (config #1, interface 0)
Jul 15 11:10:25 blood usb 1-1:1.0: hotplug
Jul 15 11:10:25 blood snd-usb-audio 1-1:1.0: usb_probe_interface
Jul 15 11:10:25 blood snd-usb-audio 1-1:1.0: usb_probe_interface - got id
Jul 15 11:10:26 blood usb 1-1: adding 1-1:1.1 (config #1, interface 1)
Jul 15 11:10:26 blood usb 1-1:1.1: hotplug
Jul 15 11:10:26 blood usb 1-1: adding 1-1:1.2 (config #1, interface 2)
Jul 15 11:10:26 blood usb 1-1:1.2: hotplug
Jul 15 11:20:00 blood CRON[9083]: (root) CMD (test -x /usr/sbin/run-crons && /usr/sbin/run-crons )
Jul 15 11:30:00 blood CRON[9096]: (root) CMD (test -x /usr/sbin/run-crons && /usr/sbin/run-crons )
Jul 15 11:31:55 blood su(pam_unix)[9123]: session opened for user root by sk(uid=1000)
Jul 15 11:32:02 blood (root-9133): (Version 2.6.0) wird gestartet, Prozesskennung 9133, Benutzer �root�
Jul 15 11:32:02 blood (root-9133): Die Adresse �xml:readonly:/etc/gconf/gconf.xml.mandatory� wurde an der Position 0 zu einer nur lesbaren Konfigurationsquelle aufgel�st
Jul 15 11:32:02 blood (root-9133): Die Adresse �xml:readwrite:/root/.gconf� wurde an der Position 1 zu einer schreibbaren Konfigurationsquelle aufgel�st
Jul 15 11:32:02 blood (root-9133): Die Adresse �xml:readonly:/etc/gconf/gconf.xml.defaults� wurde an der Position 2 zu einer nur lesbaren Konfigurationsquelle aufgel�st
Jul 15 11:32:03 blood (root-9135): iid OAFIID:BrokenNoType:20000808 has a NULL type
Jul 15 11:32:03 blood (root-9135): invalid character '#' in iid 'OAFIID:This#!!%$iid%^$%_|~!OAFIID_ContainsBadChars'
------------------------------------------------------- This SF.Net email is sponsored by BEA Weblogic Workshop FREE Java Enterprise J2EE developer tools! Get your free copy of BEA WebLogic Workshop 8.1 today. http://ads.osdn.com/?ad_id=4721&alloc_id=10040&op=click _______________________________________________ [EMAIL PROTECTED] To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-devel
