hi again!

Did what you said, but card hangs again after a few seconds.
This time without a debug message. it's not possible
to recover without reboot. Unplugging/Replugging doesn't
reinit device nor produces any debug-info.

Killing process wakes up the driver of the device:
23:12:35 kernel: pvrusb2 /*--TRACE_STREAM--*/ disable
23:12:35 kernel: pvrusb2 subsys mask changing 0x3c000:0x0 from 0x3c001 to 0x1
23:12:35 kernel: pvrusb2 /*---TRACE_CTL----*/ pvr2_encoder_stop

Plugging other device (storage) gets then:
 hub 4-0:1.0: state 5 ports 6 chg 0000 evt 0040
 ehci_hcd 0000:00:10.3: GetStatus port 6 status 001803 POWER sig=j CSC CONNECT
 hub 4-0:1.0: port 6, status 0501, change 0001, 480 Mb/s
 hub 4-0:1.0: debounce: port 6: total 100ms stable100ms status 0x501
 ehci_hcd 0000:00:10.3: port 6 high speed
 ehci_hcd 0000:00:10.3: GetStatus port 6 status 001005 POWER sig=se0 PE 
CONNECT
 usb 4-6: new high speed USB device using ehci_hcdand address 4


notice that storage is not initialized. Unplugging does not change anything.

lspci -xxx -s 10.3
0000:00:10.3 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 82)
00: 06 11 04 31 17 00 10 02 82 20 03 0c 10 f8 00 00
10: 00 ff ff df 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 62 14 20 71
30: 00 00 00 00 80 00 00 00 00 00 00 00 01 04 00 00
40: 40 00 03 00 00 00 00 00 80 10 00 09 00 00 00 00
50: 00 5a 06 80 00 00 00 00 04 0b 66 66 33 66 00 00
60: 20 20 01 00 00 00 00 00 01 00 00 01 00 00 08 a0
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 01 00 c2 ff 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 03 00 00 00 00 00 00 00 00


BTW: IDE transfer rate problem isn't solved. Transfer rates
are quite stable about 22 with ehci and 35 without ehci.

Cheers.
Helmut

-- 
My GNUpg fingerprint http://www.gnupg.org
4563 F4FB 0B7E 8698 53CD  00E9 E319 35BD 6A91 1656


-------------------------------------------------------
This SF.net email is sponsored by: Splunk Inc. Do you grep through log files
for problems?  Stop!  Download the new AJAX search engine that makes
searching your log files as easy as surfing the  web.  DOWNLOAD SPLUNK!
http://ads.osdn.com/?ad_id=7637&alloc_id=16865&op=click
_______________________________________________
linux-usb-devel@lists.sourceforge.net
To unsubscribe, use the last form field at:
https://lists.sourceforge.net/lists/listinfo/linux-usb-devel

Reply via email to