Hi
I've been running two usb webcams (an ov511 and a cpia) for several
months on a variety of kernels from 2.3.99 series through to 2.4.3 and
using two modified versions of the Webcam program in Xawtv-3.07. Mostly
successfully, with two separate UHCI cards and more recently with a
Belkin Quadrabus.
But now (in kernel 2.4.3 with utils-linux 2.11a and modutils-2.4.5) and
I can't seem to run the two cameras at the same time, without them
seriously corrupting each others images. This problem occurred briefly
in one of the kernel 2.4.2-preX but the full 2.4.2 fixed it. I've tiried
going back to 2.4.2 but the problem is there also now.
Could this be caused by modutils, rather than the kernel?
I've attached outputs from dmesg, cat /proc/interrupts, cat
/proc/bus/usb/devices, linux config and logmessages.
Can anyone help me, please?
Regards
Bill
T: Bus=04 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 1
B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 0.00
S: Product=USB OHCI Root Hub
S: SerialNumber=c489e000
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms
T: Bus=04 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=12 MxCh= 0
D: Ver= 1.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0553 ProdID=0002 Rev= 1.00
C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=400mA
I: If#= 1 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=00 Prot=ff Driver=cpia
E: Ad=81(I) Atr=01(Isoc) MxPS= 0 Ivl= 1ms
I: If#= 1 Alt= 1 #EPs= 1 Cls=ff(vend.) Sub=00 Prot=ff Driver=cpia
E: Ad=81(I) Atr=01(Isoc) MxPS= 448 Ivl= 1ms
I: If#= 1 Alt= 2 #EPs= 1 Cls=ff(vend.) Sub=00 Prot=ff Driver=cpia
E: Ad=81(I) Atr=01(Isoc) MxPS= 704 Ivl= 1ms
I: If#= 1 Alt= 3 #EPs= 1 Cls=ff(vend.) Sub=00 Prot=ff Driver=cpia
E: Ad=81(I) Atr=01(Isoc) MxPS= 960 Ivl= 1ms
T: Bus=03 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 1
B: Alloc=178/900 us (20%), #Int= 2, #Iso= 2
D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 0.00
S: Product=USB OHCI Root Hub
S: SerialNumber=c489c000
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms
T: Bus=03 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=12 MxCh= 5
D: Ver= 1.10 Cls=09(hub ) Sub=01 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0711 ProdID=0100 Rev= 1.10
C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr=100mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 1 Ivl= 32ms
T: Bus=03 Lev=02 Prnt=02 Port=00 Cnt=01 Dev#= 3 Spd=12 MxCh= 0
D: Ver= 1.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=05a9 ProdID=0511 Rev= 1.00
C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=500mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=00 Prot=00 Driver=ov511
E: Ad=81(I) Atr=01(Isoc) MxPS= 992 Ivl= 1ms
I: If#= 0 Alt= 1 #EPs= 1 Cls=ff(vend.) Sub=00 Prot=00 Driver=ov511
E: Ad=81(I) Atr=01(Isoc) MxPS= 993 Ivl= 1ms
I: If#= 0 Alt= 2 #EPs= 1 Cls=ff(vend.) Sub=00 Prot=00 Driver=ov511
E: Ad=81(I) Atr=01(Isoc) MxPS= 768 Ivl= 1ms
I: If#= 0 Alt= 3 #EPs= 1 Cls=ff(vend.) Sub=00 Prot=00 Driver=ov511
E: Ad=81(I) Atr=01(Isoc) MxPS= 769 Ivl= 1ms
I: If#= 0 Alt= 4 #EPs= 1 Cls=ff(vend.) Sub=00 Prot=00 Driver=ov511
E: Ad=81(I) Atr=01(Isoc) MxPS= 512 Ivl= 1ms
I: If#= 0 Alt= 5 #EPs= 1 Cls=ff(vend.) Sub=00 Prot=00 Driver=ov511
E: Ad=81(I) Atr=01(Isoc) MxPS= 513 Ivl= 1ms
I: If#= 0 Alt= 6 #EPs= 1 Cls=ff(vend.) Sub=00 Prot=00 Driver=ov511
E: Ad=81(I) Atr=01(Isoc) MxPS= 257 Ivl= 1ms
I: If#= 0 Alt= 7 #EPs= 1 Cls=ff(vend.) Sub=00 Prot=00 Driver=ov511
E: Ad=81(I) Atr=01(Isoc) MxPS= 0 Ivl= 1ms
T: Bus=03 Lev=02 Prnt=02 Port=03 Cnt=02 Dev#= 4 Spd=12 MxCh= 0
D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0711 ProdID=0200 Rev= 1.10
S: Manufacturer=MCT Corporation.
S: Product=USB BAY-3U1S1P
S: SerialNumber=BAY31709
C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr=100mA
I: If#= 0 Alt= 0 #EPs= 3 Cls=00(>ifc ) Sub=00 Prot=00 Driver=(none)
E: Ad=81(I) Atr=03(Int.) MxPS= 64 Ivl= 2ms
E: Ad=01(O) Atr=02(Bulk) MxPS= 64 Ivl= 0ms
E: Ad=83(I) Atr=03(Int.) MxPS= 2 Ivl= 2ms
T: Bus=03 Lev=02 Prnt=02 Port=04 Cnt=03 Dev#= 5 Spd=12 MxCh= 0
D: Ver= 1.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0711 ProdID=0300 Rev= 1.04
C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr= 98mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=07(print) Sub=01 Prot=01 Driver=usblp
E: Ad=01(O) Atr=02(Bulk) MxPS= 64 Ivl= 0ms
I: If#= 0 Alt= 1 #EPs= 2 Cls=07(print) Sub=01 Prot=02 Driver=usblp
E: Ad=01(O) Atr=02(Bulk) MxPS= 64 Ivl= 0ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl= 0ms
I: If#= 0 Alt= 2 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=ff Driver=usblp
E: Ad=01(O) Atr=02(Bulk) MxPS= 64 Ivl= 0ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl= 0ms
E: Ad=83(I) Atr=03(Int.) MxPS= 4 Ivl= 1ms
T: Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 1
B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 0.00
S: Product=USB OHCI Root Hub
S: SerialNumber=c489a000
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms
T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 1
B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 0.00
S: Product=USB OHCI Root Hub
S: SerialNumber=c488b000
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms
CPU0
0: 74293 XT-PIC timer
1: 1133 XT-PIC keyboard
2: 0 XT-PIC cascade
3: 243 XT-PIC serial
4: 4468 XT-PIC serial
7: 3408 XT-PIC serial
9: 327270 XT-PIC usb-ohci, usb-ohci, usb-ohci, usb-ohci
10: 920 XT-PIC eth0
12: 20299 XT-PIC PS/2 Mouse
14: 22628 XT-PIC ide0
NMI: 0
ERR: 0
Linux version 2.4.3 (root@mail) (gcc version egcs-2.91.66 19990314/Linux (egcs-1.1.2
release)) #1 Wed Apr 4 19:50:57 EST 2001
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
BIOS-e820: 0000000000100000 - 0000000004000000 (usable)
On node 0 totalpages: 16384
zone(0): 4096 pages.
zone(1): 12288 pages.
zone(2): 0 pages.
Kernel command line: BOOT_IMAGE=f ro root=307
Initializing CPU#0
Detected 200.456 MHz processor.
Console: colour VGA+ 80x43
Calibrating delay loop... 399.76 BogoMIPS
Memory: 62160k/65536k available (1034k kernel code, 2988k reserved, 413k data, 216k
init, 0k highmem)
Dentry-cache hash table entries: 8192 (order: 4, 65536 bytes)
Buffer-cache hash table entries: 4096 (order: 2, 16384 bytes)
Page-cache hash table entries: 16384 (order: 4, 65536 bytes)
Inode-cache hash table entries: 4096 (order: 3, 32768 bytes)
CPU: Before vendor init, caps: 008001bf 008005bf 00000000, vendor = 2
CPU: L1 I Cache: 32K (32 bytes/line), D cache 32K (32 bytes/line)
CPU: After vendor init, caps: 008001bf 008005bf 00000000 00000000
CPU: After generic, caps: 008001bf 008005bf 00000000 00000000
CPU: Common caps: 008001bf 008005bf 00000000 00000000
CPU: AMD-K6tm w/ multimedia extensions stepping 02
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.37 (20001109) Richard Gooch ([EMAIL PROTECTED])
mtrr: detected mtrr type: none
PCI: PCI BIOS revision 2.10 entry at 0xfb120, last bus=0
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: Using IRQ router default [1106/0585] at 00:00.0
Activating ISA DMA hang workarounds.
isapnp: Scanning for Pnp cards...
isapnp: No Plug & Play device found
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd v1.8
pty: 256 Unix98 ptys configured
block: queued sectors max/low 41232kB/13744kB, 128 slots per queue
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: IDE controller on PCI bus 00 dev 39
VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0x6000-0x6007, BIOS settings: hda:pio, hdb:pio
ide1: BM-DMA at 0x6008-0x600f, BIOS settings: hdc:pio, hdd:pio
hda: QUANTUM FIREBALL EL5.1A, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: 10018890 sectors (5130 MB) w/418KiB Cache, CHS=623/255/63
Partition check:
hda: hda1 hda2 < hda5 hda6 hda7 >
Floppy drive(s): fd0 is 1.44M, fd1 is 1.2M
FDC 0 is a post-1991 82077
Serial driver version 5.05 (2000-12-13) with MANY_PORTS SHARE_IRQ SERIAL_PCI ISAPNP
enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
ttyS02 at 0x03e8 (irq = 4) is a 16550A
SCSI subsystem driver Revision: 1.00
request_module[scsi_hostadapter]: Root fs not mounted
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 4096 bind 4096)
Linux IP multicast router 0.06 plus PIM-SM
VFS: Mounted root (ext2 filesystem) readonly.
Freeing unused kernel memory: 216k freed
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
Adding Swap: 128480k swap-space (priority -1)
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
ne2k-pci.c:v1.02 10/19/2000 D. Becker/P. Gortmaker
http://www.scyld.com/network/ne2k-pci.html
eth0: RealTek RTL-8029 found at 0x6200, IRQ 10, 00:00:E8:E1:89:57.
ip_tables: (c)2000 Netfilter core team
ip_conntrack (512 buckets, 4096 max)
GRE over IPv4 tunneling driver
IPv4 over IPv4 tunneling driver
usb-ohci.c: USB OHCI at membase 0xc488b000, IRQ 9
usb-ohci.c: usb-00:0b.0, PCI device 11c1:5803 (Lucent Microelectronics)
usb.c: new USB bus registered, assigned bus number 1
usb.c: kmalloc IF c1ef3680, numif 1
usb.c: new device strings: Mfr=0, Product=2, SerialNumber=1
usb.c: USB device number 1 default language ID 0x0
Product: USB OHCI Root Hub
SerialNumber: c488b000
hub.c: USB hub found
hub.c: 1 port detected
hub.c: standalone hub
hub.c: ganged power switching
hub.c: individual port over-current protection
hub.c: power on to power good time: 32ms
hub.c: hub controller current requirement: 0mA
hub.c: port removable status: R
hub.c: local power source is good
hub.c: no over-current condition exists
hub.c: enabling power on all ports
usb.c: hub driver claimed interface c1ef3680
usb.c: kusbd: /sbin/hotplug add 1
usb.c: kusbd policy returned 0xfffffffe
usb-ohci.c: USB OHCI at membase 0xc489a000, IRQ 9
usb-ohci.c: usb-00:0b.1, PCI device 11c1:5803 (Lucent Microelectronics)
usb.c: new USB bus registered, assigned bus number 2
usb.c: kmalloc IF c1ef3780, numif 1
usb.c: new device strings: Mfr=0, Product=2, SerialNumber=1
usb.c: USB device number 1 default language ID 0x0
Product: USB OHCI Root Hub
SerialNumber: c489a000
hub.c: USB hub found
hub.c: 1 port detected
hub.c: standalone hub
hub.c: ganged power switching
hub.c: individual port over-current protection
hub.c: power on to power good time: 32ms
hub.c: hub controller current requirement: 0mA
hub.c: port removable status: R
hub.c: local power source is good
hub.c: no over-current condition exists
hub.c: enabling power on all ports
usb.c: hub driver claimed interface c1ef3780
usb.c: kusbd: /sbin/hotplug add 1
usb.c: kusbd policy returned 0xfffffffe
usb-ohci.c: USB OHCI at membase 0xc489c000, IRQ 9
usb-ohci.c: usb-00:0b.2, PCI device 11c1:5803 (Lucent Microelectronics)
usb.c: new USB bus registered, assigned bus number 3
usb.c: kmalloc IF c1ef38a0, numif 1
usb.c: new device strings: Mfr=0, Product=2, SerialNumber=1
usb.c: USB device number 1 default language ID 0x0
Product: USB OHCI Root Hub
SerialNumber: c489c000
hub.c: USB hub found
hub.c: 1 port detected
hub.c: standalone hub
hub.c: ganged power switching
hub.c: individual port over-current protection
hub.c: power on to power good time: 32ms
hub.c: hub controller current requirement: 0mA
hub.c: port removable status: R
hub.c: local power source is good
hub.c: no over-current condition exists
hub.c: enabling power on all ports
usb.c: hub driver claimed interface c1ef38a0
usb.c: kusbd: /sbin/hotplug add 1
usb.c: kusbd policy returned 0xfffffffe
usb-ohci.c: USB OHCI at membase 0xc489e000, IRQ 9
usb-ohci.c: usb-00:0b.3, PCI device 11c1:5803 (Lucent Microelectronics)
usb.c: new USB bus registered, assigned bus number 4
usb.c: kmalloc IF c1ef39a0, numif 1
usb.c: new device strings: Mfr=0, Product=2, SerialNumber=1
usb.c: USB device number 1 default language ID 0x0
Product: USB OHCI Root Hub
SerialNumber: c489e000
hub.c: USB hub found
hub.c: 1 port detected
hub.c: standalone hub
hub.c: ganged power switching
hub.c: individual port over-current protection
hub.c: power on to power good time: 32ms
hub.c: hub controller current requirement: 0mA
hub.c: port removable status: R
hub.c: local power source is good
hub.c: no over-current condition exists
hub.c: enabling power on all ports
usb.c: hub driver claimed interface c1ef39a0
usb.c: kusbd: /sbin/hotplug add 1
usb.c: kusbd policy returned 0xfffffffe
Linux video capture interface: v1.00
usb.c: registered new driver usblp
hub.c: port 1 connection change
hub.c: port 1, portstatus 101, change 1, 12 Mb/s
hub.c: port 1, portstatus 103, change 10, 12 Mb/s
hub.c: USB new device connect on bus3/1, assigned device number 2
mice: PS/2 mouse device common for all mice
usb.c: kmalloc IF c1ef3ae0, numif 1
usb.c: new device strings: Mfr=0, Product=0, SerialNumber=0
hub.c: USB hub found
hub.c: 5 ports detected
hub.c: part of a compound device
hub.c: individual port power switching
hub.c: individual port over-current protection
hub.c: power on to power good time: 100ms
hub.c: hub controller current requirement: 100mA
hub.c: port removable status: RRRFF
hub.c: local power source is good
hub.c: no over-current condition exists
hub.c: enabling power on all ports
usb.c: registered new driver ov511
usb.c: hub driver claimed interface c1ef3ae0
usb.c: kusbd: /sbin/hotplug add 2
usb.c: kusbd policy returned 0xfffffffe
hub.c: USB hub found
hub.c: 5 ports detected
hub.c: part of a compound device
hub.c: individual port power switching
hub.c: individual port over-current protection
hub.c: power on to power good time: 100ms
hub.c: hub controller current requirement: 100mA
hub.c: port removable status: RRRFF
hub.c: local power source is good
hub.c: no over-current condition exists
hub.c: enabling power on all ports
hub.c: port 1 connection change
hub.c: port 1, portstatus 101, change 1, 12 Mb/s
hub.c: port 1, portstatus 103, change 10, 12 Mb/s
hub.c: USB new device connect on bus3/1/1, assigned device number 3
usb.c: kmalloc IF c1ef3c00, numif 1
usb.c: new device strings: Mfr=0, Product=0, SerialNumber=0
usb.c: hub driver claimed interface c1ef3ae0
ov511.c: ov511 driver version 1.28 registered
ov511.c: USB OV511 camera found
ov511.c: camera: Lifeview RoboCam
V4L-Driver for Vision CPiA based cameras v0.7.4
ov511.c: Sensor is an OV7620AE
usb.c: registered new driver cpia
usb.c: ov511 driver claimed interface c1ef3c00
usb.c: kusbd: /sbin/hotplug add 3
usb.c: kusbd policy returned 0xfffffffe
ov511.c: USB OV511 camera found
ov511.c: camera: Lifeview RoboCam
hub.c: port 4 connection change
hub.c: port 4, portstatus 1, change 1, 12 Mb/s
hub.c: port 4, portstatus 3, change 10, 12 Mb/s
hub.c: USB new device connect on bus3/1/4, assigned device number 4
usb.c: kmalloc IF c1ef3be0, numif 1
usb.c: new device strings: Mfr=1, Product=2, SerialNumber=3
usb.c: USB device number 4 default language ID 0x409
Manufacturer: MCT Corporation.
Product: USB BAY-3U1S1P
SerialNumber: BAY31709
ov511.c: Sensor is an OV7620AE
usb.c: ov511 driver claimed interface c1ef3c00
usb.c: unhandled interfaces on device
usb.c: USB device 4 (vend/prod 0x711/0x200) is not claimed by any active driver.
Length = 18
DescriptorType = 01
USB version = 1.10
Vendor:Product = 0711:0200
MaxPacketSize0 = 8
NumConfigurations = 1
Device version = 1.10
Device Class:SubClass:Protocol = 00:00:00
Per-interface classes
Configuration:
bLength = 9
bDescriptorType = 02
wTotalLength = 0027
bNumInterfaces = 01
bConfigurationValue = 01
iConfiguration = 00
bmAttributes = c0
MaxPower = 100mA
Interface: 0
Alternate Setting: 0
bLength = 9
bDescriptorType = 04
bInterfaceNumber = 00
bAlternateSetting = 00
bNumEndpoints = 03
bInterface Class:SubClass:Protocol = 00:00:00
iInterface = 00
Endpoint:
bLength = 7
bDescriptorType = 05
bEndpointAddress = 81 (in)
bmAttributes = 03 (Interrupt)
wMaxPacketSize = 0040
bInterval = 02
Endpoint:
bLength = 7
bDescriptorType = 05
bEndpointAddress = 01 (out)
bmAttributes = 02 (Bulk)
wMaxPacketSize = 0040
bInterval = 00
Endpoint:
bLength = 7
bDescriptorType = 05
bEndpointAddress = 83 (in)
bmAttributes = 03 (Interrupt)
wMaxPacketSize = 0002
bInterval = 02
usb.c: kusbd: /sbin/hotplug add 4
usb.c: kusbd policy returned 0xfffffffe
hub.c: port 5 connection change
hub.c: port 5, portstatus 101, change 1, 12 Mb/s
hub.c: port 5, portstatus 103, change 10, 12 Mb/s
hub.c: USB new device connect on bus3/1/5, assigned device number 5
usb.c: kmalloc IF c1ef3d80, numif 1
usb.c: new device strings: Mfr=0, Product=0, SerialNumber=0
usb.c: registered new driver wacom
printer.c: usblp0: device node registration failed
printer.c: usblp0: USB Bidirectional printer dev 5 if 0 alt 1
usb.c: usblp driver claimed interface c1ef3d80
usb.c: kusbd: /sbin/hotplug add 5
usb.c: kusbd policy returned 0xfffffffe
hub.c: port 1 connection change
hub.c: port 1, portstatus 101, change 1, 12 Mb/s
hub.c: port 1, portstatus 103, change 10, 12 Mb/s
hub.c: USB new device connect on bus4/1, assigned device number 2
usb.c: kmalloc IF c1ef3e80, numif 1
usb.c: new device strings: Mfr=0, Product=0, SerialNumber=0
USB CPiA camera found
CPiA Version: 1.20 (2.0)
CPiA PnP-ID: 0553:0002:0100
VP-Version: 1.0 0141
usb.c: cpia driver claimed interface c1ef3e80
usb.c: kusbd: /sbin/hotplug add 2
usb.c: kusbd policy returned 0xfffffffe
CSLIP: code copyright 1989 Regents of the University of California
PPP generic driver version 2.4.1
NAT: 0 dropping untracked packet c3e7a3a0 1 0.0.0.0 -> 192.168.1.2
NAT: 0 dropping untracked packet c3e7a3a0 1 0.0.0.0 -> 192.168.1.2
PPP BSD Compression module registered
PPP Deflate Compression module registered
#
# Automatically generated by make menuconfig: don't edit
#
CONFIG_X86=y
CONFIG_ISA=y
# CONFIG_SBUS is not set
CONFIG_UID16=y
#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
#
# Loadable module support
#
CONFIG_MODULES=y
CONFIG_MODVERSIONS=y
CONFIG_KMOD=y
#
# Processor type and features
#
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUM4 is not set
CONFIG_MK6=y
# CONFIG_MK7 is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP2 is not set
# CONFIG_MWINCHIP3D is not set
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INVLPG=y
CONFIG_X86_CMPXCHG=y
CONFIG_X86_BSWAP=y
CONFIG_X86_POPAD_OK=y
CONFIG_X86_L1_CACHE_SHIFT=5
CONFIG_X86_ALIGNMENT_16=y
CONFIG_X86_TSC=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
# CONFIG_TOSHIBA is not set
# CONFIG_MICROCODE is not set
# CONFIG_X86_MSR is not set
# CONFIG_X86_CPUID is not set
CONFIG_NOHIGHMEM=y
# CONFIG_HIGHMEM4G is not set
# CONFIG_HIGHMEM64G is not set
# CONFIG_MATH_EMULATION is not set
CONFIG_MTRR=y
# CONFIG_SMP is not set
# CONFIG_X86_UP_IOAPIC is not set
#
# General setup
#
CONFIG_NET=y
# CONFIG_VISWS is not set
CONFIG_PCI=y
# CONFIG_PCI_GOBIOS is not set
# CONFIG_PCI_GODIRECT is not set
CONFIG_PCI_GOANY=y
CONFIG_PCI_BIOS=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_NAMES=y
# CONFIG_EISA is not set
# CONFIG_MCA is not set
CONFIG_HOTPLUG=y
#
# PCMCIA/CardBus support
#
# CONFIG_PCMCIA is not set
CONFIG_SYSVIPC=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_SYSCTL=y
CONFIG_KCORE_ELF=y
# CONFIG_KCORE_AOUT is not set
CONFIG_BINFMT_AOUT=y
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_MISC=y
CONFIG_PM=y
# CONFIG_ACPI is not set
CONFIG_APM=m
# CONFIG_APM_IGNORE_USER_SUSPEND is not set
# CONFIG_APM_DO_ENABLE is not set
# CONFIG_APM_CPU_IDLE is not set
# CONFIG_APM_DISPLAY_BLANK is not set
# CONFIG_APM_RTC_IS_GMT is not set
# CONFIG_APM_ALLOW_INTS is not set
# CONFIG_APM_REAL_MODE_POWER_OFF is not set
#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set
#
# Parallel port support
#
CONFIG_PARPORT=m
CONFIG_PARPORT_PC=m
CONFIG_PARPORT_PC_FIFO=y
# CONFIG_PARPORT_PC_SUPERIO is not set
# CONFIG_PARPORT_AMIGA is not set
# CONFIG_PARPORT_MFC3 is not set
# CONFIG_PARPORT_ATARI is not set
# CONFIG_PARPORT_SUNBPP is not set
# CONFIG_PARPORT_OTHER is not set
CONFIG_PARPORT_1284=y
#
# Plug and Play configuration
#
CONFIG_PNP=y
CONFIG_ISAPNP=y
#
# Block devices
#
CONFIG_BLK_DEV_FD=y
# CONFIG_BLK_DEV_XD is not set
# CONFIG_PARIDE is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_LOOP is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_RAM is not set
# CONFIG_BLK_DEV_INITRD is not set
#
# Multi-device support (RAID and LVM)
#
# CONFIG_MD is not set
# CONFIG_BLK_DEV_MD is not set
# CONFIG_MD_LINEAR is not set
# CONFIG_MD_RAID0 is not set
# CONFIG_MD_RAID1 is not set
# CONFIG_MD_RAID5 is not set
# CONFIG_BLK_DEV_LVM is not set
#
# Networking options
#
CONFIG_PACKET=m
# CONFIG_PACKET_MMAP is not set
CONFIG_NETLINK=y
CONFIG_RTNETLINK=y
# CONFIG_NETLINK_DEV is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
CONFIG_FILTER=y
CONFIG_UNIX=m
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
CONFIG_RTNETLINK=y
CONFIG_NETLINK=y
CONFIG_IP_MULTIPLE_TABLES=y
CONFIG_IP_ROUTE_FWMARK=y
CONFIG_IP_ROUTE_NAT=y
CONFIG_IP_ROUTE_MULTIPATH=y
CONFIG_IP_ROUTE_TOS=y
# CONFIG_IP_ROUTE_VERBOSE is not set
# CONFIG_IP_ROUTE_LARGE_TABLES is not set
# CONFIG_IP_PNP is not set
CONFIG_NET_IPIP=m
CONFIG_NET_IPGRE=m
CONFIG_NET_IPGRE_BROADCAST=y
CONFIG_IP_MROUTE=y
# CONFIG_IP_PIMSM_V1 is not set
# CONFIG_IP_PIMSM_V2 is not set
# CONFIG_ARPD is not set
# CONFIG_INET_ECN is not set
CONFIG_SYN_COOKIES=y
#
# IP: Netfilter Configuration
#
CONFIG_IP_NF_CONNTRACK=m
CONFIG_IP_NF_FTP=m
CONFIG_IP_NF_QUEUE=m
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_LIMIT=m
CONFIG_IP_NF_MATCH_MAC=m
CONFIG_IP_NF_MATCH_MARK=m
CONFIG_IP_NF_MATCH_MULTIPORT=m
CONFIG_IP_NF_MATCH_TOS=m
# CONFIG_IP_NF_MATCH_TCPMSS is not set
CONFIG_IP_NF_MATCH_STATE=m
CONFIG_IP_NF_MATCH_UNCLEAN=m
CONFIG_IP_NF_MATCH_OWNER=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_MIRROR=m
CONFIG_IP_NF_NAT=m
CONFIG_IP_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=m
CONFIG_IP_NF_TARGET_REDIRECT=m
CONFIG_IP_NF_NAT_FTP=m
CONFIG_IP_NF_MANGLE=m
CONFIG_IP_NF_TARGET_TOS=m
CONFIG_IP_NF_TARGET_MARK=m
CONFIG_IP_NF_TARGET_LOG=m
# CONFIG_IP_NF_TARGET_TCPMSS is not set
# CONFIG_IP_NF_COMPAT_IPCHAINS is not set
# CONFIG_IP_NF_COMPAT_IPFWADM is not set
# CONFIG_IPV6 is not set
# CONFIG_KHTTPD is not set
# CONFIG_ATM is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_DECNET is not set
# CONFIG_BRIDGE is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_LLC is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_FASTROUTE is not set
# CONFIG_NET_HW_FLOWCONTROL is not set
#
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
#
# Telephony Support
#
# CONFIG_PHONE is not set
# CONFIG_PHONE_IXJ is not set
#
# ATA/IDE/MFM/RLL support
#
CONFIG_IDE=y
#
# IDE, ATA and ATAPI Block devices
#
CONFIG_BLK_DEV_IDE=y
# CONFIG_BLK_DEV_HD_IDE is not set
# CONFIG_BLK_DEV_HD is not set
CONFIG_BLK_DEV_IDEDISK=y
# CONFIG_IDEDISK_MULTI_MODE is not set
# CONFIG_BLK_DEV_IDEDISK_VENDOR is not set
# CONFIG_BLK_DEV_IDEDISK_FUJITSU is not set
# CONFIG_BLK_DEV_IDEDISK_IBM is not set
# CONFIG_BLK_DEV_IDEDISK_MAXTOR is not set
# CONFIG_BLK_DEV_IDEDISK_QUANTUM is not set
# CONFIG_BLK_DEV_IDEDISK_SEAGATE is not set
# CONFIG_BLK_DEV_IDEDISK_WD is not set
# CONFIG_BLK_DEV_COMMERIAL is not set
# CONFIG_BLK_DEV_TIVO is not set
# CONFIG_BLK_DEV_IDECS is not set
CONFIG_BLK_DEV_IDECD=y
# CONFIG_BLK_DEV_IDETAPE is not set
# CONFIG_BLK_DEV_IDEFLOPPY is not set
CONFIG_BLK_DEV_IDESCSI=m
CONFIG_BLK_DEV_CMD640=y
# CONFIG_BLK_DEV_CMD640_ENHANCED is not set
CONFIG_BLK_DEV_ISAPNP=y
CONFIG_BLK_DEV_RZ1000=y
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_IDEPCI_SHARE_IRQ=y
CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_OFFBOARD is not set
# CONFIG_IDEDMA_PCI_AUTO is not set
CONFIG_BLK_DEV_IDEDMA=y
# CONFIG_IDEDMA_PCI_WIP is not set
# CONFIG_IDEDMA_NEW_DRIVE_LISTINGS is not set
# CONFIG_BLK_DEV_AEC62XX is not set
# CONFIG_AEC62XX_TUNING is not set
# CONFIG_BLK_DEV_ALI15X3 is not set
# CONFIG_WDC_ALI15X3 is not set
# CONFIG_BLK_DEV_AMD7409 is not set
# CONFIG_AMD7409_OVERRIDE is not set
# CONFIG_BLK_DEV_CMD64X is not set
# CONFIG_BLK_DEV_CY82C693 is not set
# CONFIG_BLK_DEV_CS5530 is not set
# CONFIG_BLK_DEV_HPT34X is not set
# CONFIG_HPT34X_AUTODMA is not set
# CONFIG_BLK_DEV_HPT366 is not set
# CONFIG_BLK_DEV_PIIX is not set
# CONFIG_PIIX_TUNING is not set
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_OPTI621 is not set
# CONFIG_BLK_DEV_PDC202XX is not set
# CONFIG_PDC202XX_BURST is not set
# CONFIG_BLK_DEV_OSB4 is not set
# CONFIG_BLK_DEV_SIS5513 is not set
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
# CONFIG_BLK_DEV_VIA82CXXX is not set
# CONFIG_IDE_CHIPSETS is not set
# CONFIG_IDEDMA_AUTO is not set
# CONFIG_IDEDMA_IVB is not set
# CONFIG_DMA_NONPCI is not set
CONFIG_BLK_DEV_IDE_MODES=y
#
# SCSI support
#
CONFIG_SCSI=y
CONFIG_BLK_DEV_SD=y
CONFIG_SD_EXTRA_DEVS=40
CONFIG_CHR_DEV_ST=m
# CONFIG_CHR_DEV_OSST is not set
# CONFIG_BLK_DEV_SR is not set
CONFIG_CHR_DEV_SG=m
CONFIG_SCSI_DEBUG_QUEUES=y
CONFIG_SCSI_MULTI_LUN=y
CONFIG_SCSI_CONSTANTS=y
# CONFIG_SCSI_LOGGING is not set
#
# SCSI low-level drivers
#
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_7000FASST is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AHA152X is not set
# CONFIG_SCSI_AHA1542 is not set
# CONFIG_SCSI_AHA1740 is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_IN2000 is not set
# CONFIG_SCSI_AM53C974 is not set
# CONFIG_SCSI_MEGARAID is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_CPQFCTS is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_DTC3280 is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_EATA_DMA is not set
# CONFIG_SCSI_EATA_PIO is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_GENERIC_NCR5380 is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_PPA is not set
# CONFIG_SCSI_IMM is not set
# CONFIG_SCSI_NCR53C406A is not set
# CONFIG_SCSI_NCR53C7xx is not set
# CONFIG_SCSI_NCR53C8XX is not set
CONFIG_SCSI_SYM53C8XX=y
CONFIG_SCSI_NCR53C8XX_DEFAULT_TAGS=4
CONFIG_SCSI_NCR53C8XX_MAX_TAGS=32
CONFIG_SCSI_NCR53C8XX_SYNC=20
# CONFIG_SCSI_NCR53C8XX_PROFILE is not set
# CONFIG_SCSI_NCR53C8XX_IOMAPPED is not set
# CONFIG_SCSI_NCR53C8XX_PQS_PDS is not set
# CONFIG_SCSI_NCR53C8XX_SYMBIOS_COMPAT is not set
# CONFIG_SCSI_PAS16 is not set
# CONFIG_SCSI_PCI2000 is not set
# CONFIG_SCSI_PCI2220I is not set
# CONFIG_SCSI_PSI240I is not set
# CONFIG_SCSI_QLOGIC_FAS is not set
# CONFIG_SCSI_QLOGIC_ISP is not set
# CONFIG_SCSI_QLOGIC_FC is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_SCSI_SEAGATE is not set
# CONFIG_SCSI_SIM710 is not set
# CONFIG_SCSI_SYM53C416 is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_T128 is not set
# CONFIG_SCSI_U14_34F is not set
# CONFIG_SCSI_ULTRASTOR is not set
# CONFIG_SCSI_DEBUG is not set
#
# IEEE 1394 (FireWire) support
#
# CONFIG_IEEE1394 is not set
#
# I2O device support
#
# CONFIG_I2O is not set
# CONFIG_I2O_PCI is not set
# CONFIG_I2O_BLOCK is not set
# CONFIG_I2O_LAN is not set
# CONFIG_I2O_SCSI is not set
# CONFIG_I2O_PROC is not set
#
# Network device support
#
CONFIG_NETDEVICES=y
#
# ARCnet devices
#
# CONFIG_ARCNET is not set
CONFIG_DUMMY=m
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
# CONFIG_ETHERTAP is not set
# CONFIG_NET_SB1000 is not set
#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_LANCE is not set
# CONFIG_NET_VENDOR_SMC is not set
# CONFIG_NET_VENDOR_RACAL is not set
# CONFIG_AT1700 is not set
# CONFIG_DEPCA is not set
# CONFIG_HP100 is not set
# CONFIG_NET_ISA is not set
CONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_AC3200 is not set
# CONFIG_APRICOT is not set
# CONFIG_CS89x0 is not set
# CONFIG_TULIP is not set
# CONFIG_DE4X5 is not set
# CONFIG_DGRS is not set
# CONFIG_DM9102 is not set
# CONFIG_EEPRO100 is not set
# CONFIG_EEPRO100_PM is not set
# CONFIG_LNE390 is not set
# CONFIG_NATSEMI is not set
CONFIG_NE2K_PCI=m
# CONFIG_NE3210 is not set
# CONFIG_ES3210 is not set
# CONFIG_8139TOO is not set
# CONFIG_8139TOO_PIO is not set
# CONFIG_8139TOO_TUNE_TWISTER is not set
# CONFIG_8139TOO_8129 is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
# CONFIG_VIA_RHINE is not set
# CONFIG_WINBOND_840 is not set
# CONFIG_HAPPYMEAL is not set
# CONFIG_NET_POCKET is not set
#
# Ethernet (1000 Mbit)
#
# CONFIG_ACENIC is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_SK98LIN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PLIP is not set
CONFIG_PPP=m
# CONFIG_PPP_MULTILINK is not set
CONFIG_PPP_ASYNC=m
# CONFIG_PPP_SYNC_TTY is not set
CONFIG_PPP_DEFLATE=m
CONFIG_PPP_BSDCOMP=m
# CONFIG_PPPOE is not set
# CONFIG_SLIP is not set
#
# Wireless LAN (non-hamradio)
#
# CONFIG_NET_RADIO is not set
#
# Token Ring devices
#
# CONFIG_TR is not set
# CONFIG_NET_FC is not set
# CONFIG_RCPCI is not set
# CONFIG_SHAPER is not set
#
# Wan interfaces
#
# CONFIG_WAN is not set
#
# Amateur Radio support
#
# CONFIG_HAMRADIO is not set
#
# IrDA (infrared) support
#
# CONFIG_IRDA is not set
#
# ISDN subsystem
#
# CONFIG_ISDN is not set
#
# Old CD-ROM drivers (not SCSI, not IDE)
#
CONFIG_CD_NO_IDESCSI=y
# CONFIG_AZTCD is not set
# CONFIG_GSCD is not set
CONFIG_SBPCD=m
# CONFIG_MCD is not set
# CONFIG_MCDX is not set
# CONFIG_OPTCD is not set
# CONFIG_CM206 is not set
# CONFIG_SJCD is not set
# CONFIG_ISP16_CDI is not set
# CONFIG_CDU31A is not set
# CONFIG_CDU535 is not set
#
# Input core support
#
CONFIG_INPUT=m
CONFIG_INPUT_KEYBDEV=m
CONFIG_INPUT_MOUSEDEV=m
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
CONFIG_INPUT_JOYDEV=m
CONFIG_INPUT_EVDEV=m
#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_SERIAL=y
# CONFIG_SERIAL_CONSOLE is not set
# CONFIG_SERIAL_EXTENDED is not set
# CONFIG_SERIAL_NONSTANDARD is not set
CONFIG_UNIX98_PTYS=y
CONFIG_UNIX98_PTY_COUNT=256
CONFIG_PRINTER=m
# CONFIG_LP_CONSOLE is not set
# CONFIG_PPDEV is not set
#
# I2C support
#
CONFIG_I2C=m
CONFIG_I2C_ALGOBIT=m
# CONFIG_I2C_PHILIPSPAR is not set
# CONFIG_I2C_ELV is not set
# CONFIG_I2C_VELLEMAN is not set
# CONFIG_I2C_ALGOPCF is not set
# CONFIG_I2C_CHARDEV is not set
#
# Mice
#
# CONFIG_BUSMOUSE is not set
CONFIG_MOUSE=y
CONFIG_PSMOUSE=y
# CONFIG_82C710_MOUSE is not set
# CONFIG_PC110_PAD is not set
#
# Joysticks
#
CONFIG_JOYSTICK=y
# CONFIG_INPUT_NS558 is not set
# CONFIG_INPUT_LIGHTNING is not set
# CONFIG_INPUT_PCIGAME is not set
# CONFIG_INPUT_ANALOG is not set
# CONFIG_INPUT_A3D is not set
# CONFIG_INPUT_ADI is not set
# CONFIG_INPUT_COBRA is not set
# CONFIG_INPUT_GF2K is not set
# CONFIG_INPUT_GRIP is not set
# CONFIG_INPUT_INTERACT is not set
# CONFIG_INPUT_TMDC is not set
# CONFIG_INPUT_SIDEWINDER is not set
# CONFIG_INPUT_SERPORT is not set
# CONFIG_INPUT_WARRIOR is not set
# CONFIG_INPUT_MAGELLAN is not set
# CONFIG_INPUT_SPACEORB is not set
# CONFIG_INPUT_SPACEBALL is not set
# CONFIG_INPUT_IFORCE_232 is not set
# CONFIG_INPUT_IFORCE_USB is not set
# CONFIG_INPUT_DB9 is not set
# CONFIG_INPUT_GAMECON is not set
# CONFIG_INPUT_TURBOGRAFX is not set
# CONFIG_QIC02_TAPE is not set
#
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
# CONFIG_INTEL_RNG is not set
CONFIG_NVRAM=m
CONFIG_RTC=m
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
#
# Ftape, the floppy tape device driver
#
CONFIG_FTAPE=m
CONFIG_ZFTAPE=m
CONFIG_ZFT_DFLT_BLK_SZ=10240
CONFIG_ZFT_COMPRESSOR=m
CONFIG_FT_NR_BUFFERS=3
CONFIG_FT_PROC_FS=y
CONFIG_FT_NORMAL_DEBUG=y
# CONFIG_FT_FULL_DEBUG is not set
# CONFIG_FT_NO_TRACE is not set
# CONFIG_FT_NO_TRACE_AT_ALL is not set
CONFIG_FT_STD_FDC=y
# CONFIG_FT_MACH2 is not set
# CONFIG_FT_PROBE_FC10 is not set
# CONFIG_FT_ALT_FDC is not set
CONFIG_FT_FDC_THR=8
CONFIG_FT_FDC_MAX_RATE=2000
CONFIG_FT_ALPHA_CLOCK=0
# CONFIG_AGP is not set
CONFIG_DRM=y
# CONFIG_DRM_TDFX is not set
# CONFIG_DRM_GAMMA is not set
# CONFIG_DRM_R128 is not set
# CONFIG_DRM_RADEON is not set
# CONFIG_DRM_I810 is not set
# CONFIG_DRM_MGA is not set
#
# Multimedia devices
#
CONFIG_VIDEO_DEV=m
#
# Video For Linux
#
CONFIG_VIDEO_PROC_FS=y
# CONFIG_I2C_PARPORT is not set
CONFIG_VIDEO_BT848=m
# CONFIG_VIDEO_PMS is not set
# CONFIG_VIDEO_BWQCAM is not set
# CONFIG_VIDEO_CQCAM is not set
CONFIG_VIDEO_CPIA=m
# CONFIG_VIDEO_CPIA_PP is not set
CONFIG_VIDEO_CPIA_USB=m
# CONFIG_VIDEO_SAA5249 is not set
# CONFIG_TUNER_3036 is not set
# CONFIG_VIDEO_STRADIS is not set
# CONFIG_VIDEO_ZORAN is not set
# CONFIG_VIDEO_BUZ is not set
# CONFIG_VIDEO_ZR36120 is not set
#
# Radio Adapters
#
# CONFIG_RADIO_CADET is not set
# CONFIG_RADIO_RTRACK is not set
# CONFIG_RADIO_RTRACK2 is not set
# CONFIG_RADIO_AZTECH is not set
# CONFIG_RADIO_GEMTEK is not set
# CONFIG_RADIO_MAXIRADIO is not set
# CONFIG_RADIO_MAESTRO is not set
# CONFIG_RADIO_MIROPCM20 is not set
# CONFIG_RADIO_SF16FMI is not set
# CONFIG_RADIO_TERRATEC is not set
# CONFIG_RADIO_TRUST is not set
# CONFIG_RADIO_TYPHOON is not set
# CONFIG_RADIO_ZOLTRIX is not set
#
# File systems
#
# CONFIG_QUOTA is not set
# CONFIG_AUTOFS_FS is not set
CONFIG_AUTOFS4_FS=y
# CONFIG_REISERFS_FS is not set
# CONFIG_REISERFS_CHECK is not set
# CONFIG_ADFS_FS is not set
# CONFIG_ADFS_FS_RW is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_BFS_FS is not set
CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
# CONFIG_UMSDOS_FS is not set
CONFIG_VFAT_FS=m
# CONFIG_EFS_FS is not set
# CONFIG_JFFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_RAMFS is not set
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
# CONFIG_MINIX_FS is not set
# CONFIG_NTFS_FS is not set
# CONFIG_NTFS_RW is not set
# CONFIG_HPFS_FS is not set
CONFIG_PROC_FS=y
# CONFIG_DEVFS_FS is not set
# CONFIG_DEVFS_MOUNT is not set
# CONFIG_DEVFS_DEBUG is not set
CONFIG_DEVPTS_FS=y
# CONFIG_QNX4FS_FS is not set
# CONFIG_QNX4FS_RW is not set
# CONFIG_ROMFS_FS is not set
CONFIG_EXT2_FS=y
# CONFIG_SYSV_FS is not set
# CONFIG_SYSV_FS_WRITE is not set
CONFIG_UDF_FS=m
# CONFIG_UDF_RW is not set
CONFIG_UFS_FS=m
# CONFIG_UFS_FS_WRITE is not set
#
# Network File Systems
#
# CONFIG_CODA_FS is not set
CONFIG_NFS_FS=y
# CONFIG_NFS_V3 is not set
# CONFIG_ROOT_NFS is not set
CONFIG_NFSD=y
# CONFIG_NFSD_V3 is not set
CONFIG_SUNRPC=y
CONFIG_LOCKD=y
CONFIG_SMB_FS=m
# CONFIG_SMB_NLS_DEFAULT is not set
# CONFIG_NCP_FS is not set
# CONFIG_NCPFS_PACKET_SIGNING is not set
# CONFIG_NCPFS_IOCTL_LOCKING is not set
# CONFIG_NCPFS_STRONG is not set
# CONFIG_NCPFS_NFS_NS is not set
# CONFIG_NCPFS_OS2_NS is not set
# CONFIG_NCPFS_SMALLDOS is not set
# CONFIG_NCPFS_NLS is not set
# CONFIG_NCPFS_EXTRAS is not set
#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
CONFIG_SMB_NLS=y
CONFIG_NLS=y
#
# Native Language Support
#
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=m
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
# CONFIG_NLS_CODEPAGE_850 is not set
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
CONFIG_NLS_ISO8859_1=m
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_14 is not set
# CONFIG_NLS_ISO8859_15 is not set
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_UTF8 is not set
#
# Console drivers
#
CONFIG_VGA_CONSOLE=y
CONFIG_VIDEO_SELECT=y
# CONFIG_MDA_CONSOLE is not set
#
# Frame-buffer support
#
CONFIG_FB=y
CONFIG_DUMMY_CONSOLE=y
# CONFIG_FB_RIVA is not set
# CONFIG_FB_CLGEN is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_VESA is not set
# CONFIG_FB_VGA16 is not set
# CONFIG_FB_HGA is not set
CONFIG_VIDEO_SELECT=y
# CONFIG_FB_MATROX is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_VIRTUAL is not set
# CONFIG_FBCON_ADVANCED is not set
# CONFIG_FBCON_FONTWIDTH8_ONLY is not set
# CONFIG_FBCON_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
#
# Sound
#
# CONFIG_SOUND is not set
#
# USB support
#
CONFIG_USB=m
CONFIG_USB_DEBUG=y
CONFIG_USB_DEVICEFS=y
CONFIG_USB_BANDWIDTH=y
CONFIG_USB_UHCI=m
CONFIG_USB_UHCI_ALT=m
CONFIG_USB_OHCI=m
# CONFIG_USB_AUDIO is not set
# CONFIG_USB_BLUETOOTH is not set
CONFIG_USB_STORAGE=m
CONFIG_USB_STORAGE_DEBUG=y
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_ACM is not set
CONFIG_USB_PRINTER=m
# CONFIG_USB_HID is not set
# CONFIG_USB_KBD is not set
CONFIG_USB_MOUSE=m
CONFIG_USB_WACOM=m
# CONFIG_USB_DC2XX is not set
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_SCANNER is not set
# CONFIG_USB_MICROTEK is not set
# CONFIG_USB_IBMCAM is not set
CONFIG_USB_OV511=m
# CONFIG_USB_DSBR is not set
# CONFIG_USB_DABUSB is not set
# CONFIG_USB_PLUSB is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_NET1080 is not set
# CONFIG_USB_USS720 is not set
#
# USB Serial Converter support
#
CONFIG_USB_SERIAL=m
# CONFIG_USB_SERIAL_DEBUG is not set
CONFIG_USB_SERIAL_GENERIC=y
# CONFIG_USB_SERIAL_BELKIN is not set
# CONFIG_USB_SERIAL_WHITEHEAT is not set
# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
# CONFIG_USB_SERIAL_EMPEG is not set
# CONFIG_USB_SERIAL_FTDI_SIO is not set
# CONFIG_USB_SERIAL_VISOR is not set
# CONFIG_USB_SERIAL_EDGEPORT is not set
# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
# CONFIG_USB_SERIAL_KEYSPAN is not set
CONFIG_USB_SERIAL_MCT_U232=m
# CONFIG_USB_SERIAL_OMNINET is not set
# CONFIG_USB_RIO500 is not set
#
# Kernel hacking
#
CONFIG_MAGIC_SYSRQ=y
Apr 4 20:36:50 mail syslogd 1.3-3: restart.
Apr 4 20:36:50 mail syslog: syslogd startup succeeded
Apr 4 20:36:50 mail kernel: klogd 1.3-3, log source = /proc/kmsg started.
Apr 4 20:36:50 mail syslog: klogd startup succeeded
Apr 4 20:36:50 mail kernel: Inspecting /boot/System.map-2.4.3
Apr 4 20:36:50 mail atd: atd startup succeeded
Apr 4 20:36:32 mail rc.sysinit: Mounting proc filesystem succeeded
Apr 4 20:36:32 mail rc.sysinit: Turning off Magic SysRq key succeeded
Apr 4 20:36:32 mail date: Wed Apr 4 20:36:32 EST 2001
Apr 4 20:36:32 mail rc.sysinit: Setting clock : Wed Apr 4 20:36:32 EST 2001
succeeded
Apr 4 20:36:32 mail rc.sysinit: Activating swap partitions succeeded
Apr 4 20:36:32 mail rc.sysinit: Setting hostname mail succeeded
Apr 4 20:36:32 mail fsck: /dev/hda7: clean, 130000/350592 files, 607845/700827 blocks
Apr 4 20:36:32 mail rc.sysinit: Checking root filesystem succeeded
Apr 4 20:36:32 mail rc.sysinit: Setting up ISA PNP devices succeeded
Apr 4 20:36:32 mail rc.sysinit: Remounting root filesystem in read-write mode
succeeded
Apr 4 20:36:34 mail rc.sysinit: Finding module dependencies succeeded
Apr 4 20:36:34 mail fsck: /dev/hda5: clean, 30/4016 files, 5559/16033 blocks
Apr 4 20:36:34 mail rc.sysinit: Checking filesystems succeeded
Apr 4 20:36:35 mail rc.sysinit: Mounting local filesystems succeeded
Apr 4 20:36:35 mail rc.sysinit: Turning on user and group quotas for local
filesystems succeeded
Apr 4 20:36:35 mail rc.sysinit: Enabling swap space succeeded
Apr 4 20:36:35 mail init: Entering runlevel: 5
Apr 4 20:36:46 mail kudzu: succeeded
Apr 4 20:36:47 mail network: Enabling IPv4 packet forwarding succeeded
Apr 4 20:36:48 mail network: Bringing up interface lo succeeded
Apr 4 20:36:48 mail network: Bringing up interface eth0 succeeded
Apr 4 20:36:49 mail portmap: portmap startup succeeded
Apr 4 20:36:49 mail random: Initializing random number generator succeeded
Apr 4 20:36:49 mail netfs: Mounting other filesystems succeeded
Apr 4 20:36:51 mail kernel: Loaded 14121 symbols from /boot/System.map-2.4.3.
Apr 4 20:36:51 mail kernel: Symbols match kernel version 2.4.3.
Apr 4 20:36:51 mail kernel: Loaded 137 symbols from 8 modules.
Apr 4 20:36:51 mail kernel: Linux version 2.4.3 (root@mail) (gcc version egcs-2.91.66
19990314/Linux (egcs-1.1.2 release)) #1 Wed Apr 4 19:50:57 EST 2001
Apr 4 20:36:51 mail kernel: BIOS-provided physical RAM map:
Apr 4 20:36:51 mail kernel: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
Apr 4 20:36:51 mail kernel: BIOS-e820: 000000000009fc00 - 00000000000a0000
(reserved)
Apr 4 20:36:51 mail kernel: BIOS-e820: 00000000000f0000 - 0000000000100000
(reserved)
Apr 4 20:36:51 mail kernel: BIOS-e820: 00000000ffff0000 - 0000000100000000
(reserved)
Apr 4 20:36:51 mail kernel: BIOS-e820: 0000000000100000 - 0000000004000000 (usable)
Apr 4 20:36:51 mail kernel: On node 0 totalpages: 16384
Apr 4 20:36:51 mail kernel: zone(0): 4096 pages.
Apr 4 20:36:51 mail kernel: zone(1): 12288 pages.
Apr 4 20:36:51 mail kernel: zone(2): 0 pages.
Apr 4 20:36:51 mail kernel: Kernel command line: BOOT_IMAGE=f ro root=307
Apr 4 20:36:51 mail kernel: Initializing CPU#0
Apr 4 20:36:51 mail kernel: Detected 200.456 MHz processor.
Apr 4 20:36:51 mail kernel: Console: colour VGA+ 80x43
Apr 4 20:36:51 mail kernel: Calibrating delay loop... 399.76 BogoMIPS
Apr 4 20:36:51 mail kernel: Memory: 62160k/65536k available (1034k kernel code, 2988k
reserved, 413k data, 216k init, 0k highmem)
Apr 4 20:36:51 mail crond: crond startup succeeded
Apr 4 20:36:51 mail kernel: Dentry-cache hash table entries: 8192 (order: 4, 65536
bytes)
Apr 4 20:36:51 mail kernel: Buffer-cache hash table entries: 4096 (order: 2, 16384
bytes)
Apr 4 20:36:51 mail kernel: Page-cache hash table entries: 16384 (order: 4, 65536
bytes)
Apr 4 20:36:51 mail kernel: Inode-cache hash table entries: 4096 (order: 3, 32768
bytes)
Apr 4 20:36:51 mail kernel: CPU: L1 I Cache: 32K (32 bytes/line), D cache 32K (32
bytes/line)
Apr 4 20:36:51 mail kernel: CPU: AMD-K6tm w/ multimedia extensions stepping 02
Apr 4 20:36:51 mail kernel: Checking 'hlt' instruction... OK.
Apr 4 20:36:51 mail kernel: POSIX conformance testing by UNIFIX
Apr 4 20:36:51 mail kernel: mtrr: v1.37 (20001109) Richard Gooch
([EMAIL PROTECTED])
Apr 4 20:36:51 mail kernel: mtrr: detected mtrr type: none
Apr 4 20:36:51 mail kernel: PCI: PCI BIOS revision 2.10 entry at 0xfb120, last bus=0
Apr 4 20:36:51 mail kernel: PCI: Using configuration type 1
Apr 4 20:36:51 mail kernel: PCI: Probing PCI hardware
Apr 4 20:36:51 mail kernel: PCI: Using IRQ router default [1106/0585] at 00:00.0
Apr 4 20:36:51 mail kernel: Activating ISA DMA hang workarounds.
Apr 4 20:36:51 mail kernel: isapnp: Scanning for Pnp cards...
Apr 4 20:36:51 mail kernel: isapnp: No Plug & Play device found
Apr 4 20:36:51 mail kernel: Linux NET4.0 for Linux 2.4
Apr 4 20:36:51 mail kernel: Based upon Swansea University Computer Society NET3.039
Apr 4 20:36:51 mail kernel: Initializing RT netlink socket
Apr 4 20:36:51 mail kernel: Starting kswapd v1.8
Apr 4 20:36:51 mail kernel: pty: 256 Unix98 ptys configured
Apr 4 20:36:51 mail kernel: block: queued sectors max/low 41232kB/13744kB, 128 slots
per queue
Apr 4 20:36:51 mail kernel: Uniform Multi-Platform E-IDE driver Revision: 6.31
Apr 4 20:36:51 mail kernel: ide: Assuming 33MHz system bus speed for PIO modes;
override with idebus=xx
Apr 4 20:36:51 mail kernel: VP_IDE: IDE controller on PCI bus 00 dev 39
Apr 4 20:36:51 mail kernel: VP_IDE: chipset revision 6
Apr 4 20:36:51 mail kernel: VP_IDE: not 100% native mode: will probe irqs later
Apr 4 20:36:51 mail kernel: ide0: BM-DMA at 0x6000-0x6007, BIOS settings:
hda:pio, hdb:pio
Apr 4 20:36:51 mail kernel: ide1: BM-DMA at 0x6008-0x600f, BIOS settings:
hdc:pio, hdd:pio
Apr 4 20:36:51 mail kernel: hda: QUANTUM FIREBALL EL5.1A, ATA DISK drive
Apr 4 20:36:51 mail kernel: ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Apr 4 20:36:51 mail kernel: hda: 10018890 sectors (5130 MB) w/418KiB Cache,
CHS=623/255/63
Apr 4 20:36:51 mail kernel: Partition check:
Apr 4 20:36:51 mail kernel: hda: hda1 hda2 < hda5 hda6 hda7 >
Apr 4 20:36:51 mail kernel: Floppy drive(s): fd0 is 1.44M, fd1 is 1.2M
Apr 4 20:36:51 mail kernel: FDC 0 is a post-1991 82077
Apr 4 20:36:51 mail kernel: Serial driver version 5.05 (2000-12-13) with MANY_PORTS
SHARE_IRQ SERIAL_PCI ISAPNP enabled
Apr 4 20:36:51 mail kernel: ttyS00 at 0x03f8 (irq = 4) is a 16550A
Apr 4 20:36:51 mail kernel: ttyS01 at 0x02f8 (irq = 3) is a 16550A
Apr 4 20:36:51 mail kernel: ttyS02 at 0x03e8 (irq = 4) is a 16550A
Apr 4 20:36:51 mail kernel: SCSI subsystem driver Revision: 1.00
Apr 4 20:36:51 mail kernel: request_module[scsi_hostadapter]: Root fs not mounted
Apr 4 20:36:51 mail kernel: NET4: Linux TCP/IP 1.0 for NET4.0
Apr 4 20:36:51 mail kernel: IP Protocols: ICMP, UDP, TCP, IGMP
Apr 4 20:36:51 mail kernel: IP: routing cache hash table of 512 buckets, 4Kbytes
Apr 4 20:36:51 mail kernel: TCP: Hash tables configured (established 4096 bind 4096)
Apr 4 20:36:51 mail kernel: Linux IP multicast router 0.06 plus PIM-SM
Apr 4 20:36:51 mail kernel: VFS: Mounted root (ext2 filesystem) readonly.
Apr 4 20:36:51 mail kernel: Freeing unused kernel memory: 216k freed
Apr 4 20:36:51 mail kernel: NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
Apr 4 20:36:51 mail kernel: Adding Swap: 128480k swap-space (priority -1)
Apr 4 20:36:52 mail kernel: usb.c: registered new driver usbdevfs
Apr 4 20:36:52 mail kernel: usb.c: registered new driver hub
Apr 4 20:36:52 mail kernel: ne2k-pci.c:v1.02 10/19/2000 D. Becker/P. Gortmaker
Apr 4 20:36:52 mail kernel: http://www.scyld.com/network/ne2k-pci.html
Apr 4 20:36:52 mail kernel: eth0: RealTek RTL-8029 found at 0x6200, IRQ 10,
00:00:E8:E1:89:57.
Apr 4 20:36:52 mail inet: inetd startup succeeded
Apr 4 20:36:52 mail named[429]: starting BIND 9.1.0
Apr 4 20:36:52 mail named: named startup succeeded
Apr 4 20:36:52 mail named[429]: using 1 CPU
Apr 4 20:36:53 mail named[434]: loading configuration from '/etc/named.conf'
Apr 4 20:36:53 mail lpd: lpd startup succeeded
Apr 4 20:36:53 mail named[434]: the default for the 'auth-nxdomain' option is now 'no'
Apr 4 20:36:53 mail named[434]: no IPv6 interfaces found
Apr 4 20:36:53 mail named[434]: listening on IPv4 interface lo, 127.0.0.1#53
Apr 4 20:36:53 mail named[434]: listening on IPv4 interface eth0, 192.168.1.2#53
Apr 4 20:36:53 mail keytable: Loading keymap: Loading system font:
Apr 4 20:36:53 mail rc: Starting keytable succeeded
Apr 4 20:36:53 mail named[434]: dns_master_load: named.local:1: no TTL specified
Apr 4 20:36:53 mail named[434]: dns_zone_load: zone 0.0.127.in-addr.arpa/IN: loading
master file named.local: no ttl
Apr 4 20:36:54 mail named[434]: running
Apr 4 20:36:55 mail sendmail: sendmail startup succeeded
Apr 4 20:36:55 mail gpm: gpm startup succeeded
Apr 4 20:36:59 mail httpd: httpd startup succeeded
Apr 4 20:36:59 mail squid: Starting squid:
Apr 4 20:37:00 mail squid: squid
Apr 4 20:37:00 mail rc: Starting squid succeeded
Apr 4 20:37:01 mail xfs: xfs startup succeeded
Apr 4 20:37:03 mail smb: smbd startup succeeded
Apr 4 20:37:04 mail smb: nmbd startup succeeded
Apr 4 20:37:05 mail upsd[602]: *** PowerChute PLUS Version 4.5.2 (glibc) Started ***
Apr 4 20:37:09 mail upsd: PowerChute Plus for Unix, v4.5.2 (glibc): Copyright (c)
1999, American Power Conversion succeeded
Apr 4 20:37:09 mail linuxconf: Linuxconf final setup
Apr 4 20:37:11 mail dhcpd: Internet Software Consortium DHCP Server 2.0
Apr 4 20:37:11 mail dhcpd: Copyright 1995, 1996, 1997, 1998, 1999 The Internet
Software Consortium.
Apr 4 20:37:11 mail dhcpd: All rights reserved.
Apr 4 20:37:11 mail dhcpd:
Apr 4 20:37:11 mail dhcpd: Please contribute if you find this software useful.
Apr 4 20:37:11 mail dhcpd: For info, please visit http://www.isc.org/dhcp-contrib.html
Apr 4 20:37:11 mail dhcpd:
Apr 4 20:37:11 mail dhcpd: Listening on LPF/eth0/00:00:e8:e1:89:57/192.168.1.0
Apr 4 20:37:11 mail dhcpd: Sending on LPF/eth0/00:00:e8:e1:89:57/192.168.1.0
Apr 4 20:37:11 mail dhcpd: Sending on Socket/fallback/fallback-net
Apr 4 20:37:11 mail linuxconf: Executing: /sbin/route add -net 255.255.255.255
netmask 255.255.255.255 dev eth0
Apr 4 20:37:11 mail linuxconf: Executing: /usr/sbin/dhcpd eth0 2>&1
Apr 4 20:37:11 mail linuxconf: > Internet Software Consortium DHCP Server 2.0
Apr 4 20:37:11 mail linuxconf: > Copyright 1995, 1996, 1997, 1998, 1999 The
Internet Software Consortium.
Apr 4 20:37:11 mail linuxconf: > All rights reserved.
Apr 4 20:37:11 mail linuxconf: >
Apr 4 20:37:11 mail linuxconf: > Please contribute if you find this software
useful.
Apr 4 20:37:11 mail linuxconf: > For info, please visit
http://www.isc.org/dhcp-contrib.html
Apr 4 20:37:11 mail linuxconf: >
Apr 4 20:37:11 mail linuxconf: > Listening on
LPF/eth0/00:00:e8:e1:89:57/192.168.1.0
Apr 4 20:37:11 mail linuxconf: > Sending on
LPF/eth0/00:00:e8:e1:89:57/192.168.1.0
Apr 4 20:37:11 mail linuxconf: > Sending on Socket/fallback/fallback-net
Apr 4 20:37:11 mail rc: Starting linuxconf succeeded
Apr 4 20:37:12 mail upsd[602]: Communication established
Apr 4 20:37:12 mail kernel: ip_tables: (c)2000 Netfilter core team
Apr 4 20:37:12 mail kernel: ip_conntrack (512 buckets, 4096 max)
Apr 4 20:37:12 mail kernel: GRE over IPv4 tunneling driver
Apr 4 20:37:12 mail kernel: IPv4 over IPv4 tunneling driver
Apr 4 20:37:13 mail xntpd[724]: xntpd 3-5.93e Mon Aug 16 20:55:26 EDT 1999 (1)
Apr 4 20:37:13 mail xntpd: xntpd startup succeeded
Apr 4 20:37:13 mail xntpd[724]: tickadj = 5, tick = 10000, tvu_maxslew = 495, est. hz
= 100
Apr 4 20:37:13 mail xntpd[724]: precision = 18 usec
Apr 4 20:37:14 mail xntpd[724]: read drift of -26.086 from /etc/ntp/drift
Apr 4 20:37:14 mail xntpd[724]: bind() fd 10, family 2, port 123, addr e0000101,
in_classd=1 flags=0 fails: Address already in use
Apr 4 20:37:14 mail xntpd[724]: ...multicast address 224.0.1.1 using wildcard socket
Apr 4 20:37:14 mail xntpd[724]: setsockopt IP_ADD_MEMBERSHIP fails: No such device
for 10100e0 / 0 (224.0.1.1)
Apr 4 20:37:14 mail kernel: usb-ohci.c: USB OHCI at membase 0xc488b000, IRQ 9
Apr 4 20:37:14 mail kernel: usb-ohci.c: usb-00:0b.0, PCI device 11c1:5803 (Lucent
Microelectronics)
Apr 4 20:37:14 mail kernel: usb.c: new USB bus registered, assigned bus number 1
Apr 4 20:37:14 mail kernel: Product: USB OHCI Root Hub
Apr 4 20:37:14 mail kernel: SerialNumber: c488b000
Apr 4 20:37:14 mail kernel: hub.c: USB hub found
Apr 4 20:37:14 mail kernel: hub.c: 1 port detected
Apr 4 20:37:14 mail kernel: usb-ohci.c: USB OHCI at membase 0xc489a000, IRQ 9
Apr 4 20:37:14 mail kernel: usb-ohci.c: usb-00:0b.1, PCI device 11c1:5803 (Lucent
Microelectronics)
Apr 4 20:37:14 mail kernel: usb.c: new USB bus registered, assigned bus number 2
Apr 4 20:37:14 mail kernel: Product: USB OHCI Root Hub
Apr 4 20:37:14 mail kernel: SerialNumber: c489a000
Apr 4 20:37:14 mail kernel: hub.c: USB hub found
Apr 4 20:37:14 mail kernel: hub.c: 1 port detected
Apr 4 20:37:14 mail kernel: usb-ohci.c: USB OHCI at membase 0xc489c000, IRQ 9
Apr 4 20:37:14 mail kernel: usb-ohci.c: usb-00:0b.2, PCI device 11c1:5803 (Lucent
Microelectronics)
Apr 4 20:37:14 mail kernel: usb.c: new USB bus registered, assigned bus number 3
Apr 4 20:37:14 mail kernel: Product: USB OHCI Root Hub
Apr 4 20:37:14 mail kernel: SerialNumber: c489c000
Apr 4 20:37:14 mail kernel: hub.c: USB hub found
Apr 4 20:37:14 mail kernel: hub.c: 1 port detected
Apr 4 20:37:14 mail kernel: usb-ohci.c: USB OHCI at membase 0xc489e000, IRQ 9
Apr 4 20:37:14 mail kernel: usb-ohci.c: usb-00:0b.3, PCI device 11c1:5803 (Lucent
Microelectronics)
Apr 4 20:37:14 mail kernel: usb.c: new USB bus registered, assigned bus number 4
Apr 4 20:37:14 mail kernel: Product: USB OHCI Root Hub
Apr 4 20:37:14 mail kernel: SerialNumber: c489e000
Apr 4 20:37:14 mail kernel: hub.c: USB hub found
Apr 4 20:37:14 mail kernel: hub.c: 1 port detected
Apr 4 20:37:14 mail kernel: Linux video capture interface: v1.00
Apr 4 20:37:14 mail kernel: usb.c: registered new driver usblp
Apr 4 20:37:14 mail kernel: hub.c: USB new device connect on bus3/1, assigned device
number 2
Apr 4 20:37:14 mail kernel: mice: PS/2 mouse device common for all mice
Apr 4 20:37:15 mail kernel: hub.c: USB hub found
Apr 4 20:37:15 mail kernel: hub.c: 5 ports detected
Apr 4 20:37:15 mail kernel: usb.c: registered new driver ov511
Apr 4 20:37:15 mail kernel: hub.c: USB hub found
Apr 4 20:37:15 mail kernel: hub.c: 5 ports detected
Apr 4 20:37:15 mail kernel: hub.c: USB new device connect on bus3/1/1, assigned
device number 3
Apr 4 20:37:15 mail kernel: ov511.c: ov511 driver version 1.28 registered
Apr 4 20:37:15 mail kernel: ov511.c: USB OV511 camera found
Apr 4 20:37:15 mail kernel: ov511.c: camera: Lifeview RoboCam
Apr 4 20:37:15 mail kernel: V4L-Driver for Vision CPiA based cameras v0.7.4
Apr 4 20:37:15 mail kernel: ov511.c: Sensor is an OV7620AE
Apr 4 20:37:15 mail kernel: usb.c: registered new driver cpia
Apr 4 20:37:15 mail kernel: ov511.c: USB OV511 camera found
Apr 4 20:37:15 mail kernel: ov511.c: camera: Lifeview RoboCam
Apr 4 20:37:15 mail kernel: hub.c: USB new device connect on bus3/1/4, assigned
device number 4
Apr 4 20:37:15 mail kernel: Manufacturer: MCT Corporation.
Apr 4 20:37:15 mail kernel: Product: USB BAY-3U1S1P
Apr 4 20:37:15 mail kernel: SerialNumber: BAY31709
Apr 4 20:37:15 mail kernel: ov511.c: Sensor is an OV7620AE
Apr 4 20:37:15 mail kernel: usb.c: USB device 4 (vend/prod 0x711/0x200) is not
claimed by any active driver.
Apr 4 20:37:15 mail kernel: Length = 18
Apr 4 20:37:15 mail kernel: DescriptorType = 01
Apr 4 20:37:15 mail kernel: USB version = 1.10
Apr 4 20:37:15 mail kernel: Vendor:Product = 0711:0200
Apr 4 20:37:15 mail kernel: MaxPacketSize0 = 8
Apr 4 20:37:15 mail kernel: NumConfigurations = 1
Apr 4 20:37:15 mail kernel: Device version = 1.10
Apr 4 20:37:15 mail kernel: Device Class:SubClass:Protocol = 00:00:00
Apr 4 20:37:15 mail kernel: Per-interface classes
Apr 4 20:37:15 mail kernel: Configuration:
Apr 4 20:37:15 mail kernel: bLength = 9
Apr 4 20:37:15 mail kernel: bDescriptorType = 02
Apr 4 20:37:15 mail kernel: wTotalLength = 0027
Apr 4 20:37:15 mail kernel: bNumInterfaces = 01
Apr 4 20:37:15 mail kernel: bConfigurationValue = 01
Apr 4 20:37:15 mail kernel: iConfiguration = 00
Apr 4 20:37:15 mail kernel: bmAttributes = c0
Apr 4 20:37:15 mail kernel: MaxPower = 100mA
Apr 4 20:37:15 mail kernel:
Apr 4 20:37:15 mail kernel: Interface: 0
Apr 4 20:37:15 mail kernel: Alternate Setting: 0
Apr 4 20:37:15 mail kernel: bLength = 9
Apr 4 20:37:15 mail kernel: bDescriptorType = 04
Apr 4 20:37:15 mail kernel: bInterfaceNumber = 00
Apr 4 20:37:15 mail kernel: bAlternateSetting = 00
Apr 4 20:37:15 mail kernel: bNumEndpoints = 03
Apr 4 20:37:15 mail kernel: bInterface Class:SubClass:Protocol = 00:00:00
Apr 4 20:37:15 mail kernel: iInterface = 00
Apr 4 20:37:15 mail kernel: Endpoint:
Apr 4 20:37:15 mail kernel: bLength = 7
Apr 4 20:37:15 mail kernel: bDescriptorType = 05
Apr 4 20:37:15 mail kernel: bEndpointAddress = 81 (in)
Apr 4 20:37:15 mail kernel: bmAttributes = 03 (Interrupt)
Apr 4 20:37:15 mail kernel: wMaxPacketSize = 0040
Apr 4 20:37:15 mail kernel: bInterval = 02
Apr 4 20:37:15 mail kernel: Endpoint:
Apr 4 20:37:15 mail kernel: bLength = 7
Apr 4 20:37:15 mail kernel: bDescriptorType = 05
Apr 4 20:37:15 mail kernel: bEndpointAddress = 01 (out)
Apr 4 20:37:15 mail kernel: bmAttributes = 02 (Bulk)
Apr 4 20:37:15 mail kernel: wMaxPacketSize = 0040
Apr 4 20:37:15 mail kernel: bInterval = 00
Apr 4 20:37:15 mail kernel: Endpoint:
Apr 4 20:37:15 mail kernel: bLength = 7
Apr 4 20:37:15 mail kernel: bDescriptorType = 05
Apr 4 20:37:15 mail kernel: bEndpointAddress = 83 (in)
Apr 4 20:37:15 mail kernel: bmAttributes = 03 (Interrupt)
Apr 4 20:37:15 mail kernel: wMaxPacketSize = 0002
Apr 4 20:37:15 mail kernel: bInterval = 02
Apr 4 20:37:15 mail kernel: hub.c: USB new device connect on bus3/1/5, assigned
device number 5
Apr 4 20:37:15 mail kernel: usb.c: registered new driver wacom
Apr 4 20:37:15 mail kernel: printer.c: usblp0: device node registration failed
Apr 4 20:37:15 mail kernel: printer.c: usblp0: USB Bidirectional printer dev 5 if 0
alt 1
Apr 4 20:37:15 mail kernel: hub.c: USB new device connect on bus4/1, assigned device
number 2
Apr 4 20:37:15 mail kernel: USB CPiA camera found
Apr 4 20:37:16 mail kernel: CPiA Version: 1.20 (2.0)
Apr 4 20:37:16 mail kernel: CPiA PnP-ID: 0553:0002:0100
Apr 4 20:37:16 mail kernel: VP-Version: 1.0 0141
Apr 4 20:37:16 mail ifup-ppp: pppd started for ppp0 on /dev/ttyS2 at 115200
Apr 4 20:37:16 mail kernel: CSLIP: code copyright 1989 Regents of the University of
California
Apr 4 20:37:16 mail kernel: PPP generic driver version 2.4.1
Apr 4 20:37:16 mail pppd[777]: pppd 2.4.0 started by root, uid 0
Apr 4 20:37:34 mail dhcpd: DHCPDISCOVER from 00:40:05:4d:22:16 via eth0
Apr 4 20:37:35 mail dhcpd: DHCPOFFER on 192.168.1.12 to 00:40:05:4d:22:16 via eth0
Apr 4 20:37:35 mail dhcpd: DHCPDISCOVER from 00:40:05:4d:22:16 via eth0
Apr 4 20:37:35 mail dhcpd: DHCPOFFER on 192.168.1.12 to 00:40:05:4d:22:16 via eth0
Apr 4 20:37:35 mail dhcpd: DHCPREQUEST for 192.168.1.12 from 00:40:05:4d:22:16 via
eth0
Apr 4 20:37:35 mail dhcpd: DHCPACK on 192.168.1.12 to 00:40:05:4d:22:16 via eth0
Apr 4 20:37:47 mail pppd[777]: Serial connection established.
Apr 4 20:37:47 mail pppd[777]: Using interface ppp0
Apr 4 20:37:47 mail pppd[777]: Connect: ppp0 <--> /dev/ttyS2
Apr 4 20:37:51 mail kernel: PPP BSD Compression module registered
Apr 4 20:37:51 mail kernel: PPP Deflate Compression module registered
Apr 4 20:37:51 mail pppd[777]: local IP address 139.130.75.195
Apr 4 20:37:51 mail pppd[777]: remote IP address 139.130.75.193
Apr 4 20:37:51 mail pppd[777]: primary DNS address 203.50.0.137
Apr 4 20:37:51 mail modprobe: modprobe: Can't locate module char-major-14
Apr 4 20:38:49 mail sshd2[841]: Listener created on port 22.
Apr 4 20:38:49 mail sshd2[842]: Daemon is running.
Apr 4 20:39:11 mail PAM_pwdb[867]: (gdm) session opened for user root by (uid=0)
Apr 4 20:39:11 mail gdm[867]: gdm_slave_session_start: root on :0
Apr 4 20:39:15 mail modprobe: modprobe: Can't locate module char-major-14
Apr 4 20:39:39 mail last message repeated 5 times
Apr 4 20:39:40 mail gnome-name-server[982]: starting
Apr 4 20:39:40 mail gnome-name-server[982]: name server starting
Apr 4 20:39:47 mail modprobe: modprobe: Can't locate module char-major-14
Apr 4 20:40:04 mail last message repeated 2 times
Apr 4 20:42:18 mail named[434]: shutting down
Apr 4 20:42:18 mail named[434]: no longer listening on 127.0.0.1#53
Apr 4 20:42:18 mail named[434]: no longer listening on 192.168.1.2#53
Apr 4 20:42:19 mail named[429]: exiting
Apr 4 20:42:19 mail named: named shutdown succeeded
Apr 4 20:42:20 mail named: named startup succeeded
Apr 4 20:42:20 mail named[1057]: starting BIND 9.1.0
Apr 4 20:42:20 mail named[1057]: using 1 CPU
Apr 4 20:42:20 mail named[1061]: loading configuration from '/etc/named.conf'
Apr 4 20:42:21 mail named[1061]: the default for the 'auth-nxdomain' option is now
'no'
Apr 4 20:42:21 mail named[1061]: no IPv6 interfaces found
Apr 4 20:42:21 mail named[1061]: listening on IPv4 interface lo, 127.0.0.1#53
Apr 4 20:42:21 mail named[1061]: listening on IPv4 interface eth0, 192.168.1.2#53
Apr 4 20:42:21 mail named[1061]: listening on IPv4 interface ppp0, 139.130.75.195#53
Apr 4 20:42:21 mail named[1061]: dns_master_load: named.local:1: no TTL specified
Apr 4 20:42:21 mail named[1061]: dns_zone_load: zone 0.0.127.in-addr.arpa/IN: loading
master file named.local: no ttl
Apr 4 20:42:21 mail named[1061]: running
Apr 4 20:42:34 mail dns_update.pl: dhcpd.leases changed - updating DNS
Apr 4 20:42:34 mail named[1061]: deleting an rrset
Apr 4 20:42:34 mail named[1061]: adding an RR
Apr 4 20:42:34 mail dns_update.pl: Replacing mary.maidment.com.au in zone
maidment.com.au - Success.
Apr 4 20:42:34 mail named[1061]: deleting an rrset
Apr 4 20:42:34 mail named[1061]: adding an RR
Apr 4 20:42:34 mail dns_update.pl: Replacing 192.168.1.11 in zone
1.168.192.in-addr.arpa - Success.
Apr 4 20:42:34 mail named[1061]: deleting an rrset
Apr 4 20:42:34 mail named[1061]: adding an RR
Apr 4 20:42:34 mail dns_update.pl: Replacing revelation.maidment.com.au in zone
maidment.com.au - Success.
Apr 4 20:42:34 mail named[1061]: deleting an rrset
Apr 4 20:42:34 mail named[1061]: adding an RR
Apr 4 20:42:34 mail dns_update.pl: Replacing 192.168.1.12 in zone
1.168.192.in-addr.arpa - Success.
Apr 4 20:42:34 mail named[1061]: deleting an rrset
Apr 4 20:42:34 mail named[1061]: adding an RR
Apr 4 20:42:34 mail dns_update.pl: Replacing mary.maidment.com.au in zone
maidment.com.au - Success.
Apr 4 20:42:34 mail named[1061]: deleting an rrset
Apr 4 20:42:34 mail named[1061]: adding an RR
Apr 4 20:42:34 mail dns_update.pl: Replacing 192.168.1.13 in zone
1.168.192.in-addr.arpa - Success.
Apr 4 20:42:34 mail named[1061]: deleting an rrset
Apr 4 20:42:34 mail named[1061]: adding an RR
Apr 4 20:42:34 mail dns_update.pl: Replacing bill.maidment.com.au in zone
maidment.com.au - Success.
Apr 4 20:42:35 mail named[1061]: deleting an rrset
Apr 4 20:42:35 mail named[1061]: adding an RR
Apr 4 20:42:35 mail dns_update.pl: Replacing 192.168.1.10 in zone
1.168.192.in-addr.arpa - Success.
Apr 4 20:42:46 mail xntpd[724]: synchronized to 192.5.41.41, stratum=1
Apr 4 20:42:46 mail xntpd[724]: kernel pll status change 89
begin:vcard
n:Maidment;Bill
tel;cell:0418 682 993
tel;fax:+61 3 4342 6721
tel;home:+61 2 4342 6716
tel;work:+61 2 9927 3234
x-mozilla-html:FALSE
url:www.maidment.com.au
org:Maidment Enterprises Pty Ltd
adr:;;42 Woy Woy Bay Road;Woy Woy Bay;NSW;2256;Australia
version:2.1
email;internet:[EMAIL PROTECTED]
title:Director
x-mozilla-cpt:;0
fn:Bill Maidment
end:vcard
