On Wed, 14 Nov 2001, Brad Hards wrote: > The other thing you could provide would be extracts from your logs. Anything > starting with usbaudio, usbout or usbin is potentially applicable. A small > section showing any errors when you vary the mixer would be ideal.
Hi! When I plug in the device I got: Nov 14 04:09:22 kubus kernel: hub.c: USB new device connect on bus1/1, assigned device number 9 Nov 14 04:09:22 kubus kernel: usbaudio: device 9 audiocontrol interface 0 has 1 input and 1 output AudioStreaming interfaces Nov 14 04:09:22 kubus kernel: usbaudio: valid input sample rate 8000 Nov 14 04:09:22 kubus kernel: usbaudio: valid input sample rate 48000 Nov 14 04:09:22 kubus kernel: usbaudio: valid input sample rate 44100 Nov 14 04:09:22 kubus kernel: usbaudio: valid input sample rate 22050 Nov 14 04:09:22 kubus kernel: usbaudio: valid input sample rate 11025 Nov 14 04:09:22 kubus kernel: usbaudio: device 9 interface 2 altsetting 1: format 0x00000010 sratelo 8000 sratehi 48000 attributes 0x01 Nov 14 04:09:22 kubus kernel: usbaudio: device 9 interface 1 altsetting 0 does not have an endpoint Nov 14 04:09:22 kubus kernel: usbaudio: valid output sample rate 8000 Nov 14 04:09:22 kubus kernel: usbaudio: valid output sample rate 48000 Nov 14 04:09:22 kubus kernel: usbaudio: valid output sample rate 44100 Nov 14 04:09:22 kubus kernel: usbaudio: valid output sample rate 22050 Nov 14 04:09:22 kubus kernel: usbaudio: valid output sample rate 11025 Nov 14 04:09:22 kubus kernel: usbaudio: device 9 interface 1 altsetting 1: format 0x80000010 sratelo 8000 sratehi 48000 attributes 0x01 Nov 14 04:09:22 kubus kernel: usbaudio: registered dsp 14,3 Nov 14 04:09:22 kubus kernel: usbaudio: registered mixer 14,0 Nov 14 04:09:22 kubus kernel: usbaudio: registered mixer 14,16 Nov 14 04:09:22 kubus kernel: usb-uhci.c: interrupt, status 3, frame# 1041 Nov 14 04:09:22 kubus kernel: usb-uhci.c: interrupt, status 2, frame# 1043 Nov 14 04:09:22 kubus kernel: usb-uhci.c: interrupt, status 3, frame# 1044 Nov 14 04:09:22 kubus kernel: hiddev0: USB HID v1.00 Device [Labtec Labtec USB Headset] on usb1:9.3 Under gmix I got two devices: - one with volume and with microphone - one with just microphone Changing any of the 3 sliders does not produce anything in the logs. Best Regards, Jacek _______________________________________________ [EMAIL PROTECTED] To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-users
