Hi, I have just purchased an Epson perfection 1260 usb scanner and am having some troubles and was wondering if this is the right place to ask for help.
Can somebody please tell me what I have to do to get this scanner working. A few details: uname -a Linux dual 2.4.21 #2 SMP Sat Aug 2 18:19:50 BST 2003 i686 unknown cat /proc/bus/usb/devices [ SNIP ] I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms T: Bus=03 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 1 B: Alloc= 11/900 us ( 1%), #Int= 1, #Iso= 0 D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=0000 ProdID=0000 Rev= 0.00 S: Product=USB OHCI Root Hub S: SerialNumber=f8820000 C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms T: Bus=03 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=ff(vend.) Sub=00 Prot=ff MxPS= 8 #Cfgs= 1 P: Vendor=04b8 ProdID=011d Rev= 1.00 S: Manufacturer=EPSON S: Product=EPSON Scanner C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 2mA I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=ff Driver=usbscanner E: Ad=81(I) Atr=03(Int.) MxPS= 1 Ivl=16ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms T: Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 1 B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0 D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=0000 ProdID=0000 Rev= 0.00 S: Product=USB OHCI Root Hub S: SerialNumber=f881e000 [ SNIP ] [EMAIL PROTECTED]:~# SANE_DEBUG_EPSON=255 scanimage -L [sanei_debug] Setting debug level of epson to 255. [epson] sane_init: sane-backends 1.0.12 [epson] sane_init, ># epson.conf< [epson] sane_init, >#< [epson] sane_init, >usb /dev/usb/scanner0< [epson] attach_one_usb(/dev/usb/scanner0) [epson] SANE Epson Backend v0.2.36 - 2003-03-26 [epson] attach(/dev/usb/scanner0, 3) [epson] attach: opening /dev/usb/scanner0 [epson] The device at /dev/usb/scanner0 is not a supported EPSON scanner (product id=0x11d)[epson] sane_get_devices() No scanners were identified. If you were expecting something different, check that the scanner is plugged in, turned on and detected by the sane-find-scanner tool (if appropriate). Please read the documentation which came with this software (README, FAQ, manpages). [EMAIL PROTECTED]:~# [EMAIL PROTECTED]:~# scanimage --version scanimage (sane-backends) 1.0.12; backend version 1.0.12 [EMAIL PROTECTED]:~# sane-find-scanner # No SCSI scanners found. If you expected something different, make sure #that you have loaded a SCSI driver for your SCSI adapter. found USB scanner (vendor=0x04b8, product=0x011d) at /dev/usb/scanner0 # Your USB scanner was detected. It may or may not be supported by # SANE. Try scanimage -L and read the backend's manpage. # Scanners connected to the parallel port or other proprietary ports # can't be detected by this program. [EMAIL PROTECTED]:~# [EMAIL PROTECTED]:~# modprobe -l /lib/modules/2.4.21/kernel/drivers/usb/hpusbscsi.o /lib/modules/2.4.21/kernel/drivers/usb/microtek.o /lib/modules/2.4.21/kernel/drivers/usb/scanner.o /lib/modules/2.4.21/kernel/drivers/video/NVdriver [EMAIL PROTECTED]:~# -- Stuart Microsoft - because God hates us ------------------------------------------------------- This SF.Net email sponsored by: Free pre-built ASP.NET sites including Data Reports, E-commerce, Portals, and Forums are available now. Download today and enter to win an XBOX or Visual Studio .NET. http://aspnet.click-url.com/go/psa00100003ave/direct;at.aspnet_072303_01/01 _______________________________________________ [EMAIL PROTECTED] To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-users
