Below shows what is showing up in the relavant areas. The bottom line is that I don't seem to get a device (/dev/???) which I can mount.
Or am i looking the wrong way. how can I access the cards I put into the 9-1 car reader.
Hotplug and modutils installed -------------------------------------------
Kernel - Red Hat 9
------------------------------
# uname -a
Linux k-master.kamaradata.com 2.4.20-8 #1 Thu Mar 13 17:54:28 EST 2003 i686 i686 i386 GNU/Linux
No /dev/??? in /var/log/messages but finds device - I tried to cut the relavant stuff
---------------------------------------------------
Mar 31 14:18:41 mark_1 kernel: kernel: hub.c: 2 ports detected
Mar 31 14:18:41 mark_1 kernel: usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
Mar 31 14:18:41 mark_1 kernel: usb.c: registered new driver hiddev
Mar 31 14:18:41 mark_1 kernel: usb.c: registered new driver hid
Mar 31 14:18:41 mark_1 kernel: hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik <[EMAIL PROTECTED]>
Mar 31 14:18:41 mark_1 kernel: hid-core.c: USB HID support drivers
Mar 31 14:18:41 mark_1 kernel: mice: PS/2 mouse device common for all mice
Mar 31 14:18:41 mark_1 kernel: hub.c: new USB device 00:1d.7-1, assigned address 2
Mar 31 14:18:41 mark_1 kernel: usb.c: USB device 2 (vend/prod 0x11b0/0x6787) is not claimed by any active driver.
Mar 31 14:18:41 mark_1 kernel: SCSI subsystem driver Revision: 1.00
Mar 31 14:18:41 mark_1 kernel: Initializing USB Mass Storage driver...
Mar 31 14:18:41 mark_1 kernel: usb.c: registered new driver usb-storage
Mar 31 14:18:41 mark_1 kernel: scsi0 : SCSI emulation for USB Mass Storage devices
Mar 31 14:18:41 mark_1 kernel: Vendor: AFT PRO Model: -IX CF Rev: 0.0>
Mar 31 14:18:41 mark_1 kernel: Type: Direct-Access ANSI SCSI revision: 02
Mar 31 14:18:41 mark_1 kernel: USB Mass Storage support registered.
Mar 31 14:18:41 mark_1 kernel: EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,2), internal journal
Mar 31 14:18:41 mark_1 kernel: kjournald starting. Commit interval 5 seconds
Mar 31 14:18:41 mark_1 kernel: EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,1), internal journal
Mar 31 14:18:41 mark_1 kernel: EXT3-fs: mounted filesystem with ordered data mode.
Finds device as SCSI
----------------------------------------------
#more /proc/scsi/usb-storage-0/0
Host scsi0: usb-storage
Vendor: Atech Flash.
Product: PRO-IX
Serial Number: 822081468561
Protocol: Transparent SCSI
Transport: Bulk
GUID: 11b067870000822081468561
Attached: Yes
#cat /proc/scsi Attached devices: Host: scsi0 Channel: 00 Id: 00 Lun: 00 Vendor: AFT PRO Model: -IX CF Rev: 0.0> Type: Direct-Access ANSI SCSI revision: 02
#cat /proc/bus/usb/devices T: Bus=04 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2 B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0 D: Ver= 1.00 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=0000 ProdID=0000 Rev= 0.00 S: Product=USB UHCI Root Hub S: SerialNumber=d400 C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=255ms T: Bus=03 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2 B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0 D: Ver= 1.00 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=0000 ProdID=0000 Rev= 0.00 S: Product=USB UHCI Root Hub S: SerialNumber=d000 C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=255ms T: Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2 B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0 D: Ver= 1.00 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=0000 ProdID=0000 Rev= 0.00 S: Product=USB UHCI Root Hub S: SerialNumber=d800 C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=255ms T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 MxCh= 6 B: Alloc= 0/800 us ( 0%), #Int= 0, #Iso= 0 D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=01 MxPS= 8 #Cfgs= 1 P: Vendor=0000 ProdID=0000 Rev= 2.04 S: Manufacturer=Linux 2.4.20-8 ehci-hcd S: Product=Intel Corp. 82801DB USB EHCI Controller S: SerialNumber=00:1d.7 C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=256ms T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=11b0 ProdID=6787 Rev= 0.05 S: Manufacturer=Atech Flash. S: Product=PRO-IX S: SerialNumber=822081468561 C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
_________________________________________________________________
Surf and talk on the phone at the same time with broadband Internet access. Get high-speed for as low as $29.95/month (depending on the local service providers in your area). https://broadband.msn.com
------------------------------------------------------- This SF.net email is sponsored by: SF.net Giveback Program. SourceForge.net hosts over 70,000 Open Source Projects. See the people who have HELPED US provide better services: Click here: http://sourceforge.net/supporters.php _______________________________________________ [EMAIL PROTECTED] To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-users
