You probably need sd_mod loaded. Read the User Guide and FAQ at http://www.linux-usb.org . BTW, you should update to the 2.4.20-20.9 kernel as the one you have will not show the other card types (assuming this is a multi-lun device), I discovered this the other day after doing a fresh install of RH9, I'm not sure which RH kernel fixed it but when I installed the latest the FAQ answer worked again.
On Tue, 14 Oct 2003, John K. wrote: > I am somewhat new to the linux world... so if someone has the time a little > help would be greatly appreciated. I am trying to connect my Atech 9-1 to > work. It reads those flash cards that come with digital cameras. > > Below shows what is showing up in the relavant areas. The bottom line is > that I don't seem to get a device (/dev/???) which I can mount. > > Or am i looking the wrong way. how can I access the cards I put into the > 9-1 car reader. > > Hotplug and modutils installed > ------------------------------------------- > > Kernel - Red Hat 9 > ------------------------------ > # uname -a > Linux k-master.kamaradata.com 2.4.20-8 #1 Thu Mar 13 17:54:28 EST 2003 i686 > i686 i386 GNU/Linux > > > No /dev/??? in /var/log/messages but finds device - I tried to cut the > relavant stuff > --------------------------------------------------- > Mar 31 14:18:41 mark_1 kernel: kernel: hub.c: 2 ports detected > Mar 31 14:18:41 mark_1 kernel: usb-uhci.c: v1.275:USB Universal Host > Controller Interface driver > Mar 31 14:18:41 mark_1 kernel: usb.c: registered new driver hiddev > Mar 31 14:18:41 mark_1 kernel: usb.c: registered new driver hid > Mar 31 14:18:41 mark_1 kernel: hid-core.c: v1.8.1 Andreas Gal, Vojtech > Pavlik <[EMAIL PROTECTED]> > Mar 31 14:18:41 mark_1 kernel: hid-core.c: USB HID support drivers > Mar 31 14:18:41 mark_1 kernel: mice: PS/2 mouse device common for all mice > Mar 31 14:18:41 mark_1 kernel: hub.c: new USB device 00:1d.7-1, assigned > address 2 > Mar 31 14:18:41 mark_1 kernel: usb.c: USB device 2 (vend/prod 0x11b0/0x6787) > is not claimed by any active driver. > Mar 31 14:18:41 mark_1 kernel: SCSI subsystem driver Revision: 1.00 > Mar 31 14:18:41 mark_1 kernel: Initializing USB Mass Storage driver... > Mar 31 14:18:41 mark_1 kernel: usb.c: registered new driver usb-storage > Mar 31 14:18:41 mark_1 kernel: scsi0 : SCSI emulation for USB Mass Storage > devices > Mar 31 14:18:41 mark_1 kernel: Vendor: AFT PRO Model: -IX CF > Rev: 0.0> > Mar 31 14:18:41 mark_1 kernel: Type: Direct-Access > ANSI SCSI revision: 02 > Mar 31 14:18:41 mark_1 kernel: USB Mass Storage support registered. > Mar 31 14:18:41 mark_1 kernel: EXT3 FS 2.4-0.9.19, 19 August 2002 on > ide0(3,2), internal journal > Mar 31 14:18:41 mark_1 kernel: kjournald starting. Commit interval 5 > seconds > Mar 31 14:18:41 mark_1 kernel: EXT3 FS 2.4-0.9.19, 19 August 2002 on > ide0(3,1), internal journal > Mar 31 14:18:41 mark_1 kernel: EXT3-fs: mounted filesystem with ordered data > mode. > > Finds device as SCSI > ---------------------------------------------- > #more /proc/scsi/usb-storage-0/0 > Host scsi0: usb-storage > Vendor: Atech Flash. > Product: PRO-IX > Serial Number: 822081468561 > Protocol: Transparent SCSI > Transport: Bulk > GUID: 11b067870000822081468561 > Attached: Yes > > > #cat /proc/scsi > Attached devices: > Host: scsi0 Channel: 00 Id: 00 Lun: 00 > Vendor: AFT PRO Model: -IX CF Rev: 0.0> > Type: Direct-Access ANSI SCSI revision: 02 > > #cat /proc/bus/usb/devices > T: Bus=04 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2 > B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0 > D: Ver= 1.00 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 > P: Vendor=0000 ProdID=0000 Rev= 0.00 > S: Product=USB UHCI Root Hub > S: SerialNumber=d400 > C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA > I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub > E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=255ms > T: Bus=03 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2 > B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0 > D: Ver= 1.00 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 > P: Vendor=0000 ProdID=0000 Rev= 0.00 > S: Product=USB UHCI Root Hub > S: SerialNumber=d000 > C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA > I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub > E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=255ms > T: Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2 > B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0 > D: Ver= 1.00 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 > P: Vendor=0000 ProdID=0000 Rev= 0.00 > S: Product=USB UHCI Root Hub > S: SerialNumber=d800 > C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA > I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub > E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=255ms > T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 MxCh= 6 > B: Alloc= 0/800 us ( 0%), #Int= 0, #Iso= 0 > D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=01 MxPS= 8 #Cfgs= 1 > P: Vendor=0000 ProdID=0000 Rev= 2.04 > S: Manufacturer=Linux 2.4.20-8 ehci-hcd > S: Product=Intel Corp. 82801DB USB EHCI Controller > S: SerialNumber=00:1d.7 > C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA > I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub > E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=256ms > T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=480 MxCh= 0 > D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 > P: Vendor=11b0 ProdID=6787 Rev= 0.05 > S: Manufacturer=Atech Flash. > S: Product=PRO-IX > S: SerialNumber=822081468561 > C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=500mA > I: If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage > E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms > E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms > > _________________________________________________________________ > Surf and talk on the phone at the same time with broadband Internet access. > Get high-speed for as low as $29.95/month (depending on the local service > providers in your area). https://broadband.msn.com > > > > ------------------------------------------------------- > This SF.net email is sponsored by: SF.net Giveback Program. > SourceForge.net hosts over 70,000 Open Source Projects. > See the people who have HELPED US provide better services: > Click here: http://sourceforge.net/supporters.php > _______________________________________________ > [EMAIL PROTECTED] > To unsubscribe, use the last form field at: > https://lists.sourceforge.net/lists/listinfo/linux-usb-users > -- /------------------------------------+-------------------------\ |Stephen J. Gowdy | SLAC, MailStop 34, | |http://www.slac.stanford.edu/~gowdy/ | 2575 Sand Hill Road, | |http://calendar.yahoo.com/gowdy | Menlo Park CA 94025, USA | |EMail: [EMAIL PROTECTED] | Tel: +1 650 926 3144 | \------------------------------------+-------------------------/ ------------------------------------------------------- This SF.net email is sponsored by: SF.net Giveback Program. SourceForge.net hosts over 70,000 Open Source Projects. See the people who have HELPED US provide better services: Click here: http://sourceforge.net/supporters.php _______________________________________________ [EMAIL PROTECTED] To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-users
