Thanks a bunch I will give it a try.
John
From: "Stephen J. Gowdy" <[EMAIL PROTECTED]> Reply-To: [EMAIL PROTECTED] To: "John K." <[EMAIL PROTECTED]> CC: [EMAIL PROTECTED] Subject: Re: [Linux-usb-users] can't get Atech 9-1 to work Date: Mon, 13 Oct 2003 18:20:27 -0700 (PDT)
You probably need sd_mod loaded. Read the User Guide and FAQ at http://www.linux-usb.org . BTW, you should update to the 2.4.20-20.9 kernel as the one you have will not show the other card types (assuming this is a multi-lun device), I discovered this the other day after doing a fresh install of RH9, I'm not sure which RH kernel fixed it but when I installed the latest the FAQ answer worked again.
On Tue, 14 Oct 2003, John K. wrote:
> I am somewhat new to the linux world... so if someone has the time a little
> help would be greatly appreciated. I am trying to connect my Atech 9-1 to
> work. It reads those flash cards that come with digital cameras.
>
> Below shows what is showing up in the relavant areas. The bottom line is
> that I don't seem to get a device (/dev/???) which I can mount.
>
> Or am i looking the wrong way. how can I access the cards I put into the
> 9-1 car reader.
>
> Hotplug and modutils installed
> -------------------------------------------
>
> Kernel - Red Hat 9
> ------------------------------
> # uname -a
> Linux k-master.kamaradata.com 2.4.20-8 #1 Thu Mar 13 17:54:28 EST 2003 i686
> i686 i386 GNU/Linux
>
>
> No /dev/??? in /var/log/messages but finds device - I tried to cut the
> relavant stuff
> ---------------------------------------------------
> Mar 31 14:18:41 mark_1 kernel: kernel: hub.c: 2 ports detected
> Mar 31 14:18:41 mark_1 kernel: usb-uhci.c: v1.275:USB Universal Host
> Controller Interface driver
> Mar 31 14:18:41 mark_1 kernel: usb.c: registered new driver hiddev
> Mar 31 14:18:41 mark_1 kernel: usb.c: registered new driver hid
> Mar 31 14:18:41 mark_1 kernel: hid-core.c: v1.8.1 Andreas Gal, Vojtech
> Pavlik <[EMAIL PROTECTED]>
> Mar 31 14:18:41 mark_1 kernel: hid-core.c: USB HID support drivers
> Mar 31 14:18:41 mark_1 kernel: mice: PS/2 mouse device common for all mice
> Mar 31 14:18:41 mark_1 kernel: hub.c: new USB device 00:1d.7-1, assigned
> address 2
> Mar 31 14:18:41 mark_1 kernel: usb.c: USB device 2 (vend/prod 0x11b0/0x6787)
> is not claimed by any active driver.
> Mar 31 14:18:41 mark_1 kernel: SCSI subsystem driver Revision: 1.00
> Mar 31 14:18:41 mark_1 kernel: Initializing USB Mass Storage driver...
> Mar 31 14:18:41 mark_1 kernel: usb.c: registered new driver usb-storage
> Mar 31 14:18:41 mark_1 kernel: scsi0 : SCSI emulation for USB Mass Storage
> devices
> Mar 31 14:18:41 mark_1 kernel: Vendor: AFT PRO Model: -IX CF
> Rev: 0.0>
> Mar 31 14:18:41 mark_1 kernel: Type: Direct-Access
> ANSI SCSI revision: 02
> Mar 31 14:18:41 mark_1 kernel: USB Mass Storage support registered.
> Mar 31 14:18:41 mark_1 kernel: EXT3 FS 2.4-0.9.19, 19 August 2002 on
> ide0(3,2), internal journal
> Mar 31 14:18:41 mark_1 kernel: kjournald starting. Commit interval 5
> seconds
> Mar 31 14:18:41 mark_1 kernel: EXT3 FS 2.4-0.9.19, 19 August 2002 on
> ide0(3,1), internal journal
> Mar 31 14:18:41 mark_1 kernel: EXT3-fs: mounted filesystem with ordered data
> mode.
>
> Finds device as SCSI
> ----------------------------------------------
> #more /proc/scsi/usb-storage-0/0
> Host scsi0: usb-storage
> Vendor: Atech Flash.
> Product: PRO-IX
> Serial Number: 822081468561
> Protocol: Transparent SCSI
> Transport: Bulk
> GUID: 11b067870000822081468561
> Attached: Yes
>
>
> #cat /proc/scsi
> Attached devices:
> Host: scsi0 Channel: 00 Id: 00 Lun: 00
> Vendor: AFT PRO Model: -IX CF Rev: 0.0>
> Type: Direct-Access ANSI SCSI revision: 02
>
> #cat /proc/bus/usb/devices
> T: Bus=04 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
> B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
> D: Ver= 1.00 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
> P: Vendor=0000 ProdID=0000 Rev= 0.00
> S: Product=USB UHCI Root Hub
> S: SerialNumber=d400
> C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA
> I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
> E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=255ms
> T: Bus=03 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
> B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
> D: Ver= 1.00 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
> P: Vendor=0000 ProdID=0000 Rev= 0.00
> S: Product=USB UHCI Root Hub
> S: SerialNumber=d000
> C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA
> I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
> E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=255ms
> T: Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
> B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
> D: Ver= 1.00 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
> P: Vendor=0000 ProdID=0000 Rev= 0.00
> S: Product=USB UHCI Root Hub
> S: SerialNumber=d800
> C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA
> I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
> E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=255ms
> T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 MxCh= 6
> B: Alloc= 0/800 us ( 0%), #Int= 0, #Iso= 0
> D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=01 MxPS= 8 #Cfgs= 1
> P: Vendor=0000 ProdID=0000 Rev= 2.04
> S: Manufacturer=Linux 2.4.20-8 ehci-hcd
> S: Product=Intel Corp. 82801DB USB EHCI Controller
> S: SerialNumber=00:1d.7
> C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA
> I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
> E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=256ms
> T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=480 MxCh= 0
> D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
> P: Vendor=11b0 ProdID=6787 Rev= 0.05
> S: Manufacturer=Atech Flash.
> S: Product=PRO-IX
> S: SerialNumber=822081468561
> C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=500mA
> I: If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage
> E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
> E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
>
> _________________________________________________________________
> Surf and talk on the phone at the same time with broadband Internet access.
> Get high-speed for as low as $29.95/month (depending on the local service
> providers in your area). https://broadband.msn.com
>
>
>
> -------------------------------------------------------
> This SF.net email is sponsored by: SF.net Giveback Program.
> SourceForge.net hosts over 70,000 Open Source Projects.
> See the people who have HELPED US provide better services:
> Click here: http://sourceforge.net/supporters.php
> _______________________________________________
> [EMAIL PROTECTED]
> To unsubscribe, use the last form field at:
> https://lists.sourceforge.net/lists/listinfo/linux-usb-users
>
-- /------------------------------------+-------------------------\ |Stephen J. Gowdy | SLAC, MailStop 34, | |http://www.slac.stanford.edu/~gowdy/ | 2575 Sand Hill Road, | |http://calendar.yahoo.com/gowdy | Menlo Park CA 94025, USA | |EMail: [EMAIL PROTECTED] | Tel: +1 650 926 3144 | \------------------------------------+-------------------------/
_________________________________________________________________
Send instant messages to anyone on your contact list with MSN Messenger 6.0. Try it now FREE! http://msnmessenger-download.com
------------------------------------------------------- This SF.net email is sponsored by: SF.net Giveback Program. SourceForge.net hosts over 70,000 Open Source Projects. See the people who have HELPED US provide better services: Click here: http://sourceforge.net/supporters.php _______________________________________________ [EMAIL PROTECTED] To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-users
