It doesn't look like it gets recongied below, the says "driver=(none)".
Looking at the working device list there is no listing for this device,
but there is one close in number spaec (which might mean nothing);

http://www.qbik.ch/usb/devices/showdev.php?id=638

It says you should use the kaweth driver for it. You could try editing the
source and adding a line for your device (or just loading the driver might
be enough, if it only uses that table for hotplug).

On Wed, 5 Jan 2005, Eero Heino wrote:

>
> The adapter gets recognized but I'm unable to
> use it as a network interface.
>
> Here is my /proc/bus/usb/devices:
>
> Bus=03 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=480 MxCh= 5
> B:  Alloc=  0/800 us ( 0%), #Int=  0, #Iso=  0
> D:  Ver= 2.00 Cls=09(hub  ) Sub=00 Prot=01 MxPS= 8 #Cfgs=  1
> P:  Vendor=0000 ProdID=0000 Rev= 2.06
> S:  Manufacturer=Linux 2.6.10 ehci_hcd
> S:  Product=NEC Corporation USB 2.0
> S:  SerialNumber=0000:00:12.2
> C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=  0mA
> I:  If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
> E:  Ad=81(I) Atr=03(Int.) MxPS=   2 Ivl=256ms
>
> T:  Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=12  MxCh= 2
> B:  Alloc=  0/900 us ( 0%), #Int=  0, #Iso=  0
> D:  Ver= 1.10 Cls=09(hub  ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
> P:  Vendor=0000 ProdID=0000 Rev= 2.06
> S:  Manufacturer=Linux 2.6.10 ohci_hcd
> S:  Product=NEC Corporation USB (#2)
> S:  SerialNumber=0000:00:12.1
> C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr=  0mA
> I:  If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
> E:  Ad=81(I) Atr=03(Int.) MxPS=   2 Ivl=255ms
>
> T:  Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=12  MxCh= 3
> B:  Alloc= 13/900 us ( 1%), #Int=  1, #Iso=  0
> D:  Ver= 1.10 Cls=09(hub  ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
> P:  Vendor=0000 ProdID=0000 Rev= 2.06
> S:  Manufacturer=Linux 2.6.10 ohci_hcd
> S:  Product=NEC Corporation USB
> S:  SerialNumber=0000:00:12.0
> C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr=  0mA
> I:  If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
> E:  Ad=81(I) Atr=03(Int.) MxPS=   2 Ivl=255ms
>
> T:  Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  4 Spd=1.5 MxCh= 0
> D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
> P:  Vendor=046d ProdID=c01d Rev=21.00
> S:  Manufacturer=Logitech
> S:  Product=USB-PS/2 Optical Mouse
> C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr= 98mA
> I:  If#= 0 Alt= 0 #EPs= 1 Cls=03(HID  ) Sub=01 Prot=02 Driver=usbmouse
> E:  Ad=81(I) Atr=03(Int.) MxPS=   7 Ivl=10ms
>
> T:  Bus=01 Lev=01 Prnt=01 Port=01 Cnt=02 Dev#=  5 Spd=12  MxCh= 0
> D:  Ver= 1.10 Cls=ff(vend.) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
> P:  Vendor=07b8 ProdID=4006 Rev= 0.06
> S:  Manufacturer=Generic
> S:  Product=USB 10M HomePNA Adapter
> S:  SerialNumber=00E0989BC8B3
> C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr= 90mA
> I:  If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none)
> E:  Ad=81(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
> E:  Ad=02(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
> E:  Ad=83(I) Atr=03(Int.) MxPS=   8 Ivl=32ms
>
> --
>     Eero
>
>
> On Tue, Jan 04, 2005 at 08:24:01AM -0800, Stephen J. Gowdy wrote:
>
> > Can you supply some info as requested in teh FAQ?
> >
> > On Tue, 4 Jan 2005, Eero Heino wrote:
> >
> > > Hi,
> > >
> > > Is there any support for homepna 2.0 adapters?
> > >
> > > I have a smc2821usb.
> > >
> > > --
> > >     Eero
> > >
> > >
> > > -------------------------------------------------------
> > > The SF.Net email is sponsored by: Beat the post-holiday blues
> > > Get a FREE limited edition SourceForge.net t-shirt from ThinkGeek.
> > > It's fun and FREE -- well, almost....http://www.thinkgeek.com/sfshirt
> > > _______________________________________________
> > > [email protected]
> > > To unsubscribe, use the last form field at:
> > > https://lists.sourceforge.net/lists/listinfo/linux-usb-users
> > >
> >
> > --
> >  /------------------------------------+-------------------------\
> > |Stephen J. Gowdy                     | SLAC, MailStop 34,       |
> > |http://www.slac.stanford.edu/~gowdy/ | 2575 Sand Hill Road,     |
> > |http://calendar.yahoo.com/gowdy      | Menlo Park CA 94025, USA |
> > |EMail: [EMAIL PROTECTED]       | Tel: +1 650 926 3144     |
> >  \------------------------------------+-------------------------/
> >
> >
> > -------------------------------------------------------
> > The SF.Net email is sponsored by: Beat the post-holiday blues
> > Get a FREE limited edition SourceForge.net t-shirt from ThinkGeek.
> > It's fun and FREE -- well, almost....http://www.thinkgeek.com/sfshirt
> > _______________________________________________
> > [email protected]
> > To unsubscribe, use the last form field at:
> > https://lists.sourceforge.net/lists/listinfo/linux-usb-users
> >
>

--
 /------------------------------------+-------------------------\
|Stephen J. Gowdy                     | SLAC, MailStop 34,       |
|http://www.slac.stanford.edu/~gowdy/ | 2575 Sand Hill Road,     |
|http://calendar.yahoo.com/gowdy      | Menlo Park CA 94025, USA |
|EMail: [EMAIL PROTECTED]       | Tel: +1 650 926 3144     |
 \------------------------------------+-------------------------/


-------------------------------------------------------
The SF.Net email is sponsored by: Beat the post-holiday blues
Get a FREE limited edition SourceForge.net t-shirt from ThinkGeek.
It's fun and FREE -- well, almost....http://www.thinkgeek.com/sfshirt
_______________________________________________
[email protected]
To unsubscribe, use the last form field at:
https://lists.sourceforge.net/lists/listinfo/linux-usb-users

Reply via email to