On Thu, 20 Oct 2005, Travis H. wrote: > > How did you connect up the panel? > > I plugged the hub/panel into the USB 1.0 connector; it probed, and > said that it wasn't running at full speed (of course), and no devices > plugged into the hub worked.
Can you post your log files from doing this? It should run at full speed (but perhaps not at High speed). > Then I tried plugging it into the card, > which has the only v2.0 connectors, and of course that didn't work. There is no difference between an V1 and V2 connector. There are A and B type connectors which are completely orthoganal. You must plug the A end into the host (computer) and the B end into the device (hub). This is the same for V1 and V2. Did you do that? Did you plug in the power connector (which looks like a floppy power connector) too? Perhaps you know this and I'm just not reading the correct meaning, if so sorry. > There were some diagnostics, I believe USB timeouts of some kind, I'll > send more details later. > -- > http://www.lightconsulting.com/~travis/ -><- > "We already have enough fast, insecure systems." -- Schneier & Ferguson > GPG fingerprint: 50A1 15C5 A9DE 23B9 ED98 C93E 38E9 204A 94C2 641B > -- /------------------------------------+-------------------------\ |Stephen J. Gowdy | SLAC, MailStop 34, | |http://www.slac.stanford.edu/~gowdy/ | 2575 Sand Hill Road, | |http://calendar.yahoo.com/gowdy | Menlo Park CA 94025, USA | |EMail: [EMAIL PROTECTED] | Tel: +1 650 926 3144 | \------------------------------------+-------------------------/ ------------------------------------------------------- This SF.Net email is sponsored by: Power Architecture Resource Center: Free content, downloads, discussions, and more. http://solutions.newsforge.com/ibmarch.tmpl _______________________________________________ Linux-usb-users@lists.sourceforge.net To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-users
