What are those message from? THe card that doesn't work or the hub that doesn't work?
Perhaps you can start again by posting two different threads with the infomration requested for bug reports in teh FAQ at http://www.linux-usb.org? On Thu, 20 Oct 2005, Travis H. wrote: > So here is what I have: > > # lsusb > Bus 004 Device 001: ID 0000:0000 > Bus 003 Device 002: ID 051d:0002 American Power Conversion Back-UPS Pro 500 > Bus 003 Device 001: ID 0000:0000 > Bus 002 Device 001: ID 0000:0000 > Bus 001 Device 003: ID 0409:0058 NEC Corp. HighSpeed Hub > Bus 001 Device 001: ID 0000:0000 > > # lsusb -v > Bus 004 Device 001: ID 0000:0000 > Device Descriptor: > bLength 18 > bDescriptorType 1 > bcdUSB 1.10 > bDeviceClass 9 Hub > bDeviceSubClass 0 Unused > bDeviceProtocol 0 > bMaxPacketSize0 8 > idVendor 0x0000 > idProduct 0x0000 > bcdDevice 2.06 > iManufacturer 3 Linux 2.6.13-rc6-3124-smp uhci_hcd > iProduct 2 UHCI Host Controller > iSerial 1 0000:02:06.1 > bNumConfigurations 1 > Configuration Descriptor: > bLength 9 > bDescriptorType 2 > wTotalLength 25 > bNumInterfaces 1 > bConfigurationValue 1 > iConfiguration 0 > bmAttributes 0xe0 > Self Powered > Remote Wakeup > MaxPower 0mA > Interface Descriptor: > bLength 9 > bDescriptorType 4 > bInterfaceNumber 0 > bAlternateSetting 0 > bNumEndpoints 1 > bInterfaceClass 9 Hub > bInterfaceSubClass 0 Unused > bInterfaceProtocol 0 > iInterface 0 > Endpoint Descriptor: > bLength 7 > bDescriptorType 5 > bEndpointAddress 0x81 EP 1 IN > bmAttributes 3 > Transfer Type Interrupt > Synch Type none > Usage Type Data > wMaxPacketSize 0x0002 bytes 2 once > bInterval 255 > Hub Descriptor: > bLength 9 > bDescriptorType 41 > nNbrPorts 2 > wHubCharacteristic 0x000a > No power switching (usb 1.0) > Per-port overcurrent protection > bPwrOn2PwrGood 1 * 2 milli seconds > bHubContrCurrent 0 milli Ampere > DeviceRemovable 0x00 > PortPwrCtrlMask 0x00 > Language IDs: (length=4) > 0409 English(US) > > Bus 003 Device 002: ID 051d:0002 American Power Conversion Back-UPS Pro 500 > cannot peek string descriptor 3, error = Connection timed out(110) > cannot peek string descriptor 1, error = Connection timed out(110) > cannot peek string descriptor 2, error = Connection timed out(110) > Device Descriptor: > bLength 18 > bDescriptorType 1 > bcdUSB 1.10 > bDeviceClass 0 (Defined at Interface level) > bDeviceSubClass 0 > bDeviceProtocol 0 > bMaxPacketSize0 8 > idVendor 0x051d American Power Conversion > idProduct 0x0002 Back-UPS Pro 500 > bcdDevice 1.06 > iManufacturer 3 > iProduct 1 > iSerial 2 > bNumConfigurations 1 > > cannot get config descriptor 0, Connection timed out (110) > > Bus 003 Device 001: ID 0000:0000 > Device Descriptor: > bLength 18 > bDescriptorType 1 > bcdUSB 1.10 > bDeviceClass 9 Hub > bDeviceSubClass 0 Unused > bDeviceProtocol 0 > bMaxPacketSize0 8 > idVendor 0x0000 > idProduct 0x0000 > bcdDevice 2.06 > iManufacturer 3 Linux 2.6.13-rc6-3124-smp uhci_hcd > iProduct 2 UHCI Host Controller > iSerial 1 0000:02:06.0 > bNumConfigurations 1 > Configuration Descriptor: > bLength 9 > bDescriptorType 2 > wTotalLength 25 > bNumInterfaces 1 > bConfigurationValue 1 > iConfiguration 0 > bmAttributes 0xe0 > Self Powered > Remote Wakeup > MaxPower 0mA > Interface Descriptor: > bLength 9 > bDescriptorType 4 > bInterfaceNumber 0 > bAlternateSetting 0 > bNumEndpoints 1 > bInterfaceClass 9 Hub > bInterfaceSubClass 0 Unused > bInterfaceProtocol 0 > iInterface 0 > Endpoint Descriptor: > bLength 7 > bDescriptorType 5 > bEndpointAddress 0x81 EP 1 IN > bmAttributes 3 > Transfer Type Interrupt > Synch Type none > Usage Type Data > wMaxPacketSize 0x0002 bytes 2 once > bInterval 255 > Hub Descriptor: > bLength 9 > bDescriptorType 41 > nNbrPorts 2 > wHubCharacteristic 0x000a > No power switching (usb 1.0) > Per-port overcurrent protection > bPwrOn2PwrGood 1 * 2 milli seconds > bHubContrCurrent 0 milli Ampere > DeviceRemovable 0x00 > PortPwrCtrlMask 0x00 > Language IDs: (length=4) > 0409 English(US) > > Bus 002 Device 001: ID 0000:0000 > Device Descriptor: > bLength 18 > bDescriptorType 1 > bcdUSB 1.10 > bDeviceClass 9 Hub > bDeviceSubClass 0 Unused > bDeviceProtocol 0 > bMaxPacketSize0 8 > idVendor 0x0000 > idProduct 0x0000 > bcdDevice 2.06 > iManufacturer 3 Linux 2.6.13-rc6-3124-smp uhci_hcd > iProduct 2 UHCI Host Controller > iSerial 1 0000:00:07.2 > bNumConfigurations 1 > Configuration Descriptor: > bLength 9 > bDescriptorType 2 > wTotalLength 25 > bNumInterfaces 1 > bConfigurationValue 1 > iConfiguration 0 > bmAttributes 0xc0 > Self Powered > MaxPower 0mA > Interface Descriptor: > bLength 9 > bDescriptorType 4 > bInterfaceNumber 0 > bAlternateSetting 0 > bNumEndpoints 1 > bInterfaceClass 9 Hub > bInterfaceSubClass 0 Unused > bInterfaceProtocol 0 > iInterface 0 > Endpoint Descriptor: > bLength 7 > bDescriptorType 5 > bEndpointAddress 0x81 EP 1 IN > bmAttributes 3 > Transfer Type Interrupt > Synch Type none > Usage Type Data > wMaxPacketSize 0x0002 bytes 2 once > bInterval 255 > Hub Descriptor: > bLength 9 > bDescriptorType 41 > nNbrPorts 2 > wHubCharacteristic 0x000a > No power switching (usb 1.0) > Per-port overcurrent protection > bPwrOn2PwrGood 1 * 2 milli seconds > bHubContrCurrent 0 milli Ampere > DeviceRemovable 0x00 > PortPwrCtrlMask 0x00 > Language IDs: (length=4) > 0409 English(US) > > Bus 001 Device 003: ID 0409:0058 NEC Corp. HighSpeed Hub > cannot peek string descriptor 1, error = Connection timed out(110) > cannot peek string descriptor 2, error = Connection timed out(110) > Device Descriptor: > bLength 18 > bDescriptorType 1 > bcdUSB 2.00 > bDeviceClass 9 Hub > bDeviceSubClass 0 Unused > bDeviceProtocol 1 Single TT > bMaxPacketSize0 64 > idVendor 0x0409 NEC Corp. > idProduct 0x0058 HighSpeed Hub > bcdDevice 1.00 > iManufacturer 1 > iProduct 2 > iSerial 0 > bNumConfigurations 1 > cannot get config descriptor 0, Connection timed out (110) > can't get hub descriptor: Connection timed out > > Bus 001 Device 001: ID 0000:0000 > Device Descriptor: > bLength 18 > bDescriptorType 1 > bcdUSB 2.00 > bDeviceClass 9 Hub > bDeviceSubClass 0 Unused > bDeviceProtocol 1 Single TT > bMaxPacketSize0 8 > idVendor 0x0000 > idProduct 0x0000 > bcdDevice 2.06 > iManufacturer 3 Linux 2.6.13-rc6-3124-smp ehci_hcd > iProduct 2 EHCI Host Controller > iSerial 1 0000:02:06.2 > bNumConfigurations 1 > Configuration Descriptor: > bLength 9 > bDescriptorType 2 > wTotalLength 25 > bNumInterfaces 1 > bConfigurationValue 1 > iConfiguration 0 > bmAttributes 0xe0 > Self Powered > Remote Wakeup > MaxPower 0mA > Interface Descriptor: > bLength 9 > bDescriptorType 4 > bInterfaceNumber 0 > bAlternateSetting 0 > bNumEndpoints 1 > bInterfaceClass 9 Hub > bInterfaceSubClass 0 Unused > bInterfaceProtocol 0 > iInterface 0 > Endpoint Descriptor: > bLength 7 > bDescriptorType 5 > bEndpointAddress 0x81 EP 1 IN > bmAttributes 3 > Transfer Type Interrupt > Synch Type none > Usage Type Data > wMaxPacketSize 0x0002 bytes 2 once > bInterval 12 > Hub Descriptor: > bLength 9 > bDescriptorType 41 > nNbrPorts 4 > wHubCharacteristic 0x000a > No power switching (usb 1.0) > Per-port overcurrent protection > TT think time 8 FS bits > bPwrOn2PwrGood 10 * 2 milli seconds > bHubContrCurrent 0 milli Ampere > DeviceRemovable 0x00 > PortPwrCtrlMask 0x00 > Language IDs: (length=4) > 0409 English(US) > > Typical error messages in dmesg are: > usb 1-3: lsusb timed out on ep0in len=0/4 > usb 1-3: usbfs: USBDEVFS_CONTROL failed cmd lsusb rqt 128 rq 6 len 4 ret -110 > > Anyone got any clues as to what could be going on? > -- > http://www.lightconsulting.com/~travis/ -><- > "We already have enough fast, insecure systems." -- Schneier & Ferguson > GPG fingerprint: 50A1 15C5 A9DE 23B9 ED98 C93E 38E9 204A 94C2 641B > -- /------------------------------------+-------------------------\ |Stephen J. Gowdy | SLAC, MailStop 34, | |http://www.slac.stanford.edu/~gowdy/ | 2575 Sand Hill Road, | |http://calendar.yahoo.com/gowdy | Menlo Park CA 94025, USA | |EMail: [EMAIL PROTECTED] | Tel: +1 650 926 3144 | \------------------------------------+-------------------------/ ------------------------------------------------------- This SF.Net email is sponsored by: Power Architecture Resource Center: Free content, downloads, discussions, and more. http://solutions.newsforge.com/ibmarch.tmpl _______________________________________________ Linux-usb-users@lists.sourceforge.net To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-users
