[EMAIL PROTECTED] wrote: > I have a pc that I use as a VDR. In order to use less power and make it > a little quiter I run > it with a lower FSB than I could. Normal is FSB 133 Mhz and I run it > with 66 Mhz FSB. > > The problem is that the ehci_hcd doesn't work with my FSB 66 Mhz. > No USB 2.0 memory stick and no USB 2.0 harddisk. > If I remove ehci_hcd it runs nicely with uhci_hcd, but slowly of course.
Probably the EHCI controller is creating its clock from the bus clock. So you created a hardware issue. No way to change anything in software. ------------------------------------------------------------------------- Using Tomcat but need to do more? Need to support web services, security? Get stuff done quickly with pre-integrated technology to make your job easier. Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642 _______________________________________________ Linux-usb-users@lists.sourceforge.net To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-users