Look at your routing table (route -n). That is where all of the problems lie.
On Fri, 21 Jun 2002, Michael Hipp wrote: > Red Hat 7.3 Pro server: > > eth0 eepro100 192.168.0.4 (no cable connected!) > eth1 3c59x 192.168.0.5 > > When eth0 is up, I can ping both .4 and .5. Samba won't browse. I took eth0 > down (ifconfig etho down). I can still ping both addresses but samba will > now browse. > > Pull cable out of eth1 (machine totally off network) and I can't ping > either. Hook cable back up, can ping both. > > Move cable to eth0, can't ping. Turn eth0 up, can't ping anything. > > I know the eth0 card works. Is it really normal to be able to ping both > card's addresses through 1 interface? Why won't samba work with both up? > > Any help appreciated. > > The output of ifconfig is pasted below with both up. > > Thanks, > Michael > > eth0 Link encap:Ethernet HWaddr 00:C0:9F:08:CE:BF > inet addr:192.168.0.4 Bcast:192.168.0.255 Mask:255.255.255.0 > UP BROADCAST MULTICAST MTU:1500 Metric:1 > RX packets:141 errors:0 dropped:0 overruns:0 frame:0 > TX packets:85 errors:0 dropped:0 overruns:4 carrier:0 > collisions:0 txqueuelen:100 > RX bytes:19292 (18.8 Kb) TX bytes:12381 (12.0 Kb) > Interrupt:11 Base address:0xa000 > > eth1 Link encap:Ethernet HWaddr 00:04:76:DE:88:F8 > inet addr:192.168.0.5 Bcast:192.168.0.255 Mask:255.255.255.0 > UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 > RX packets:557 errors:0 dropped:0 overruns:0 frame:0 > TX packets:598 errors:0 dropped:0 overruns:0 carrier:34 > collisions:0 txqueuelen:100 > RX bytes:73784 (72.0 Kb) TX bytes:75757 (73.9 Kb) > Interrupt:11 Base address:0xec00 -- ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Lonni J Friedman [EMAIL PROTECTED] Linux Step-by-step & TyGeMo http://netllama.ipfox.com _______________________________________________ Linux-users mailing list - http://linux-sxs.org/mailman/listinfo/linux-users Subscribe/Unsubscribe info, Archives,and Digests are located at the above URL.
