You may also want to try mkelfImage-1.6 (in the linuxbios tree). I've found it to work more often. I also experienced an error using the newest mkelfImage where it would load from linuxbios but not etherboot. But that was perhaps my binutils as well.
On Sat, 6 Sep 2003, rimy2000 wrote: > Thanks, but > > 1. My Kernel is workable under Normal BIOS, it is even workable under Linux BIOS > without Etherboot. > 2. Yes, I have added them: > > ./mkelfImage --kernel=/mnt/root/bzImage-17 --output=vmlinuz.vo --command-line="c > onsole=/dev/ttyS0,115200n8 root=/dev/hda2" > > ----- Original Message ----- > From: "YhLu" <[EMAIL PROTECTED]> > To: "rimy2000" <[EMAIL PROTECTED]>; <[EMAIL PROTECTED]> > Sent: Saturday, September 06, 2003 11:35 AM > Subject: Re: about etherboot and mkelfImage > > > 1. You need to verify your Kernel is workable under Normal BIOS. > 2. when you using mkelfimage, you need add parameters for Console port and > baud rate. > > YH. > > -----邮件原件----- > 发件人: rimy2000 [mailto:[EMAIL PROTECTED] > 发送时间: 2003年9月5日 20:24 > 收件人: [EMAIL PROTECTED] > 主题: Re: about etherboot and mkelfImage > > After I upgrade binutils to 2.14, mkelfImage 2.5 work find and the new > output is > > Loading 172.27.4.23:vmlinuz.vo ...(ELF)... > ............................................................................ > ............................................................................ > ............................................................................ > ............................................................................ > ............................................................................ > ............................................................................ > ............................................................................ > ............................................................................ > .......................................................................done > > rhine disable > > Firmware type: LinuxBIOS > > but then I received nothing from serial. > > Any hint? > > Thanks! > > _______________________________________________ > Linuxbios mailing list > [EMAIL PROTECTED] > http://www.clustermatic.org/mailman/listinfo/linuxbios > _______________________________________________ > Linuxbios mailing list > [EMAIL PROTECTED] > http://www.clustermatic.org/mailman/listinfo/linuxbios > _______________________________________________ Linuxbios mailing list [EMAIL PROTECTED] http://www.clustermatic.org/mailman/listinfo/linuxbios
