Mail from ILUG-BOM list (Non-Digest Mode) Sometime on Jun 17, Prakash Advani assembled some asciibets to say: > I put hdparm -c1 -d1 /dev/ hda in my startup script and my hard disk > speed increased from 3 MBps to 17.9 Mbps I used the same parameters. Tried unmasking and multi-sector reads, but that didn't make any difference, so I stuck with -c1 -d1. Increased the transfer rate from 3.92MBps to 7.22MBps. Not that much of an increase, but still good. I have a Seagate 6.4GB ST36422A Philip -- Row, row, row your bits, gently down the stream... _______________________________________________ Linuxers mailing list [EMAIL PROTECTED] http://ilug-bom.org.in/mailman/listinfo/linuxers
- Re: [ILUG-BOM] 16 bit IDE ac... Trevor Warren
- Re: [ILUG-BOM] 16 bit IDE access Trevor Warren
- Re: [ILUG-BOM] 16 bit IDE access Prakash Advani
- Re: [ILUG-BOM] 16 bit IDE access Trevor Warren
- Re: [ILUG-BOM] 16 bit IDE access Prakash Advani
- Re: [ILUG-BOM] 16 bit IDE access Sameer D. Sahasrabuddhe
- Re: [ILUG-BOM] 16 bit IDE ac... Prakash Advani
- Re: [ILUG-BOM] 16 bit ID... Sameer D. Sahasrabuddhe
- Re: [ILUG-BOM] 16 bit ID... Dinesh Shah
- Re: [ILUG-BOM] 16 bit IDE ac... Trevor Warren
- Re: [ILUG-BOM] 16 bit IDE access Philip S Tellis
- Re: [ILUG-BOM] 16 bit IDE access Erle Pereira
- Re: [ILUG-BOM] 16 bit IDE access Kishor Bhagwat
- Re: [ILUG-BOM] 16 bit IDE access Trevor Warren
- Re: [ILUG-BOM] 16 bit IDE access Kishor Bhagwat
