Hi Vish,
For DHCP to work properly you need to define a range of IP address for the
clients and servers should have fixed IP addresses which are not from that
range.
Your IP address 192.168.0.11 is I think from the range so it will not work
always as the IP address may have assigned to a client.
Secondly IP addesss 192.x.x.x and 90.x.x.x do not work together as the first
one is Class C and second one is Class A. So do not give 90.x.x.x IP address
to 192.x.x.x range you are using.
I hope this clarifies you.
regards,
Vaibhav
>Vaibhav,
>
>The problem I have is very peculiar.
>
>I am using the address 192.168.0 7 on my primary server. This has a DHCPD
>enabled for issuing IP
>addresses for clients.
>
>I I add another server on that and give it fixed IP address such as
>198.168.0 11, then the second server
>gives this problem.
>
>If I change these IP addresses to say : 90.0.0.7 and 90.0.0.11 the thing
>seem to work, but not always.
>
>after this, If i restore the address to earier , these may be ok.
>
>Sometimes, on a single server with 192.168.0 7 also this problems arise.
>
>any clue ?
______________________________________________________
Get Your Private, Free Email at http://www.hotmail.com
To subscribe / unsubscribe goto the site www.ilug-bom.org ., click on the mailing list
button and fill the appropriate information
and submit. For any other queries contact the ML maintener
