Hi, Daniel Schnell wrote: > Tim Yamin wrote: >> On Wed, Aug 6, 2008 at 12:58 PM, Daniel Schnell >> <[EMAIL PROTECTED]> wrote: >>> Hi, >>> >>> Sorry for testing this patch so late, but I get these if I apply >>> your patch to 2.6.24.7 and use it with my Sandisk Extreme IV 4GB >>> card: >> >> Hi, >> >> What board are you using? DMA requires a few more signals to be >> routed through correctly to the CF card slot so maybe that's your >> problem... >> > > Hi, > > We are using our own MPC5200B based board. Can you be a bit more > specific about which signals have to be routed ? >
After checking our schematics with Tim Yamin, we found that our board has not the DMA lines connected. It seems I have to wait some time before I get an updated board and can test UDMA again .... Sorry for the noise, although this was important for us to know. Best regards, Daniel. _______________________________________________ Linuxppc-dev mailing list Linuxppc-dev@ozlabs.org https://ozlabs.org/mailman/listinfo/linuxppc-dev
