On 10/23/2011 9:33 PM, Jim Spaloss wrote:
> I just picked up a pair of Soekris Net6501-50 boxes to upgrade two of my
> client's aging m0n0wall installations.I wanted to go dual-wan, so I'll
> be migrating them to PFSense.
> 
> I didn't realize at the when I placed the order that the storage was
> mSATA and not CF based. Needless to say, I don't have an mSATA adapter
> handy, so I had to explore alternative means of getting PFSense
> installed.After much trial and error, I managed to get both boxes
> flashed with 2.0 release using a modified version of what I found here
> http://blog.martinshouse.com/2010/05/howto-install-soekris-server-with-pxe.html.

That should work under normal circumstances. I have a net6501 and a 2GB
mSATA SSD but currently I'm running from HDD instead. I imagine if I
were to use the mSATA SSD I'd put it in while running from HDD and then
image the SSD with a NanoBSD image while booted from the HDD. Kind of a
roundabout way to do it, but it would likely be more reliable in the
long run. I haven't had a chance to attempt that though.

Though I wouldn't expect that to have a much different effect than what
you're seeing.

> Now I can get the Soekris boxes to boot up to the point where it
> attempts to load the kernel from disk most of the time, then it freezes.
> I've been able to get further a few times, but it always seems to crap
> out on storage-related issue.
> 
> I doubt that both of my brand new mSATA SSDs are bad, 

Don't be so quick to assume :-)
http://old.nabble.com/msata-not-detected-td32613117.html

> [...] it's probably
> something I'm doing wrong. I wrote the embedded image (tried both 1GB &
> 2GB) by booting to voyage linux PXE and using the command zcat
> /tmp/usb/pfsense-image-file.img.gz | dd of=/dev/sda bs=16k as per the
> instructions on the PFSense site. Could it be my block size?

Not likely, I've written out cards with a bs of 1M before and they've
been ok.

Were the LBAs reported as a problem the same with both the 1GB and 2GB
image? What size mSATA SSDs did you get?

Jim
_______________________________________________
List mailing list
[email protected]
http://lists.pfsense.org/mailman/listinfo/list

Reply via email to