-- Sent from my HP TouchPad

On Oct 24, 2011 9:36 AM, Jim Pingle <[email protected]> wrote:

That should work under normal circumstances. I have a net6501 and a 2GB
mSATA SSD but currently I'm running from HDD instead. I imagine if I
were to use the mSATA SSD I'd put it in while running from HDD and then
image the SSD with a NanoBSD image while booted from the HDD. Kind of a
roundabout way to do it, but it would likely be more reliable in the
long run. I haven't had a chance to attempt that though.

Though I wouldn't expect that to have a much different effect than what
you're seeing.

I didn't think of trying that. What would you use to boot the HDD with? Does PFSense have everything I would need to write the mSATA drive or would a FreeBSD base install be a better idea?

> Now I can get the Soekris boxes to boot up to the point where it
> attempts to load the kernel from disk most of the time, then it freezes.
> I've been able to get further a few times, but it always seems to crap
> out on storage-related issue.
>
> I doubt that both of my brand new mSATA SSDs are bad,

Don't be so quick to assume :-)
http://old.nabble.com/msata-not-detected-td32613117.html

Interesting, I'll email soekris support and maybe attempt to remove and bridge that resistor. Thanks for the tip!

> [...] it's probably
> something I'm doing wrong. I wrote the embedded image (tried both 1GB &
> 2GB) by booting to voyage linux PXE and using the command zcat
> /tmp/usb/pfsense-image-file.img.gz | dd of=/dev/sda bs=16k as per the
> instructions on the PFSense site. Could it be my block size?

Not likely, I've written out cards with a bs of 1M before and they've
been ok.

Were the LBAs reported as a problem the same with both the 1GB and 2GB
image? What size mSATA SSDs did you get?

They are both 2GB. I had some trouble the second time around when writing the image. dd reported that there was not enough space available. That's when I dropped down to the 1GB image. I seem to have gotten a little further with the 1GB image, but was never able to boot. I ended up sticking a regular sata HDD in the one box (it had to be installed tonight). I have a mSATA to SATA adapter coming so I'll give that a try with phdiskwrite when it comes in. Hopefully I can get the mSATA situation figured out before I have to custom make another sata power cable.

Thanks for the quick response.
Jim
_______________________________________________
List mailing list
[email protected]
http://lists.pfsense.org/mailman/listinfo/list

Reply via email to