On Thu, Jan 26, 2017 at 12:17 PM, Karl Fife <[email protected]> wrote:
> Would you mind sharing a snapshot of your Rangeley-optimized tunables? > > IIRC there are un-editable tunables that show on your tunables page that > are not called out in the XML config. > > Thanks Vick > > This is the /boot/loader.conf from one my C2758 systems from Netgate (though they were pfSense branded when I bought them): autoboot_delay="3" vm.kmem_size="435544320" vm.kmem_size_max="535544320" kern.ipc.nmbclusters="0" boot_multicons="YES" boot_serial="YES" console="comconsole,vidconsole" comconsole_speed="115200" hw.usb.no_pf="1" and /boot/loader.conf.local: kern.cam.boot_delay="10000" ahci_load="YES" kern.cam.boot_delay=10000 kern.ipc.nmbclusters="1000000" hw.igb.rxd=4096 hw.igb.txd=4096 hw.igb.max_interrupt_rate=32000 hw.igb.num_queues=8 hint.uart.1.flags="0x10" hint.uart.0.flags="0x00" comconsole_port="0x2f8" legal.intel_ipw.license_ack=1 I configured the serial console to talk to the SoL console provided by the built-in IPMI controller (that's the uart bits). I don't recall which parts other than those were default as system shipped vs. anything I may have changed. My notes are unclear on these. _______________________________________________ pfSense mailing list https://lists.pfsense.org/mailman/listinfo/list Support the project with Gold! https://pfsense.org/gold
