from TB-303 resources mailing list -------[ http://www.tb-303.org ] ---------------------- If your tb-303 is unmodded and has no gate & cv inputs then there is no way the kenton can connect to your tb-303 except for the din sync in which will only control tempo/start/stop. So yes, in order to control midi note on/off you will have to install gate & cv inputs on your tb-303. Depending on what you wish to do with your tb-303 it might be worthwile to do the borg or devilfish mod which also include the gate & cv inputs and an accent, slide & filter input. (hey if you're going to mod your 303 anyhow why not do it right :)
Cheers, Marcel ----- Original Message ----- From: "Tim Cannady" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Friday, March 26, 2004 9:41 PM Subject: [TB-303.org] Is a permantent hardware mod required for sequencing? > from TB-303 resources mailing list > -------[ http://www.tb-303.org ] ---------------------- > > I was under the impression that with something like a Kenton Pro Solo, I > would be able to both Sync the 303 as well as controll it with Cubase. I > just got this reply though on a forum I'm on though: > > "Yes, permanent hardware modification, done by someone experienced. > Otherwise you will only be able to sync the internal sequencer and not have > midi control over note on note off." > > I thought I would ask you guys again because you *are* the specialists ;) > Thanks. > -Tim > > _________________________________________________________________ > Find a broadband plan that fits. Great local deals on high-speed Internet > access. > https://broadband.msn.com/?pgmarket=en-us/go/onm00200360ave/direct/01/ > > -------[ http://www.tb-303.org ] ---------------------- > Subscribe & unsubscribe there : > http://www.tb-303.org/ > > -------[ http://www.tb-303.org ] ---------------------- Subscribe & unsubscribe there : http://www.tb-303.org/
