from TB-303 resources mailing list -------[ http://www.tb-303.org ] ---------------------- As far as I know there is no "standard" mod at the moment that will output cutoff/reconance. Sure it's possible, but you're going to have to find somebody willing to work out the mod. Most likely not worth it, just tweak the knobs yourself. Syncing to your 909 can be done with the kenton pro solo, or any other midi to din sync converter. Just look at the devilfish and borg mods, or the kenton socket kit, and see what options they give you.
----- Original Message ----- From: "Tim Cannady" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Sunday, March 28, 2004 8:27 PM Subject: Re: [TB-303.org] Is a permantent hardware mod required for sequencing? > from TB-303 resources mailing list > -------[ http://www.tb-303.org ] ---------------------- > > I see. So can you please tell me exactly what I can and cannot get without a > permanent hardware retrofit? > > -I'm mainly looking to *controll* the 303 as a slave via midi. > -I'd like to be able to play with the envelopes (cutoff/resonance) in > realtime and have Cubase record these changes and be able to edit them in > Cubase. > -I'd like to be able to sync it to my 909 and jam with it > > So buying a Kenton Pro Solo won't give me all of these options huh? Let me > know what retrofitting will enable! > Thanks guys ;) > -T > > >From: "Marcel de Velde" <[EMAIL PROTECTED]> > >Reply-To: [EMAIL PROTECTED] > >To: <[EMAIL PROTECTED]> > >Subject: Re: [TB-303.org] Is a permantent hardware mod required for > >sequencing? > >Date: Sun, 28 Mar 2004 15:05:45 +0200 > > > >from TB-303 resources mailing list > >-------[ http://www.tb-303.org ] ---------------------- > > > >Hi Tim, > > > >Those CV and Gate jacks are outputs, not inputs. So they won't be of much > >help in this case. > > > >----- Original Message ----- > >From: "Tim Cannady" <[EMAIL PROTECTED]> > >To: <[EMAIL PROTECTED]> > >Sent: Saturday, March 27, 2004 7:27 PM > >Subject: Re: [TB-303.org] Is a permantent hardware mod required for > >sequencing? > > > > > > > from TB-303 resources mailing list > > > -------[ http://www.tb-303.org ] ---------------------- > > > > > > Heh, yeah I'd totally go the nicest route if I had to. However, I do > >have > > > two 1/4 inch looking jacks that are marked CV and Gate and they look > >factory > > > done...? > > > > > > > > > >From: "Marcel de Velde" <[EMAIL PROTECTED]> > > > >Reply-To: [EMAIL PROTECTED] > > > >To: <[EMAIL PROTECTED]> > > > >Subject: Re: [TB-303.org] Is a permantent hardware mod required for > > > >sequencing? > > > >Date: Sat, 27 Mar 2004 11:09:25 +0100 > > > > > > > >from TB-303 resources mailing list > > > >-------[ http://www.tb-303.org ] ---------------------- > > > > > > > >If your tb-303 is unmodded and has no gate & cv inputs then there is no > >way > > > >the kenton can connect to your tb-303 except for the din sync in which > >will > > > >only control tempo/start/stop. > > > >So yes, in order to control midi note on/off you will have to install > >gate > > > >& > > > >cv inputs on your tb-303. > > > >Depending on what you wish to do with your tb-303 it might be worthwile > >to > > > >do the borg or devilfish mod which also include the gate & cv inputs > >and > >an > > > >accent, slide & filter input. > > > >(hey if you're going to mod your 303 anyhow why not do it right :) > > > > > > > >Cheers, > > > >Marcel > > > > > > > >----- Original Message ----- > > > >From: "Tim Cannady" <[EMAIL PROTECTED]> > > > >To: <[EMAIL PROTECTED]> > > > >Sent: Friday, March 26, 2004 9:41 PM > > > >Subject: [TB-303.org] Is a permantent hardware mod required for > >sequencing? > > > > > > > > > > > > > from TB-303 resources mailing list > > > > > -------[ http://www.tb-303.org ] ---------------------- > > > > > > > > > > I was under the impression that with something like a Kenton Pro > >Solo, > >I > > > > > would be able to both Sync the 303 as well as controll it with > >Cubase. > >I > > > > > just got this reply though on a forum I'm on though: > > > > > > > > > > "Yes, permanent hardware modification, done by someone experienced. > > > > > Otherwise you will only be able to sync the internal sequencer and > >not > > > >have > > > > > midi control over note on note off." > > > > > > > > > > I thought I would ask you guys again because you *are* the > >specialists > > > >;) > > > > > Thanks. > > > > > -Tim > > > > > > > > > > _________________________________________________________________ > > > > > Find a broadband plan that fits. Great local deals on high-speed > > > >Internet > > > > > access. > > > > > > >https://broadband.msn.com/?pgmarket=en-us/go/onm00200360ave/direct/01/ > > > > > > > > > > -------[ http://www.tb-303.org ] ---------------------- > > > > > Subscribe & unsubscribe there : > > > > > http://www.tb-303.org/ > > > > > > > > > > > > > >-------[ http://www.tb-303.org ] ---------------------- > > > >Subscribe & unsubscribe there : > > > >http://www.tb-303.org/ > > > > > > > > > > _________________________________________________________________ > > > Get rid of annoying pop-up ads with the new MSN Toolbar - FREE! > > > http://toolbar.msn.com/go/onm00200414ave/direct/01/ > > > > > > -------[ http://www.tb-303.org ] ---------------------- > > > Subscribe & unsubscribe there : > > > http://www.tb-303.org/ > > > > > > > >-------[ http://www.tb-303.org ] ---------------------- > >Subscribe & unsubscribe there : > >http://www.tb-303.org/ > > > > _________________________________________________________________ > Is your PC infected? Get a FREE online computer virus scan from McAfee� > Security. http://clinic.mcafee.com/clinic/ibuy/campaign.asp?cid=3963 > > -------[ http://www.tb-303.org ] ---------------------- > Subscribe & unsubscribe there : > http://www.tb-303.org/ > > -------[ http://www.tb-303.org ] ---------------------- Subscribe & unsubscribe there : http://www.tb-303.org/
