I've never seen this logs return "in use message" You should be able to copy them without any problem but are in a temp folder at this stage.
On Thu, Aug 6, 2015, 8:05 AM David McSpadden <[email protected]> wrote: > If it stuck in use. > > Open it. > > Copy and paste to a new notepad. > > Save to USB key or map a drive back to your own pc and save it to your own > pc. > > > > > > *From:* [email protected] [mailto: > [email protected]] *On Behalf Of *Niall Brady > *Sent:* Thursday, August 6, 2015 7:53 AM > > > *To:* [email protected] > *Subject:* Re: [mssms] My capture is broken > > > > what says it's in use ? press f8, browse to x:\windows\temp\smstslog\ and > copy the smsts*.log files in there to a usb key or elsewhere > > > > On Thu, Aug 6, 2015 at 1:33 PM, John Aubrey <[email protected]> > wrote: > > It says it’s in use. Typically I can grab it after it fails, but it never > fails, it just reboots. > > > > *From:* [email protected] [mailto: > [email protected]] *On Behalf Of *Niall Brady > *Sent:* Thursday, August 6, 2015 12:58 AM > *To:* [email protected] > *Subject:* Re: [mssms] My capture is broken > > > > when it's in Windows PE, can you grab the smsts.log file then, (press f8) > and attach it here > > > > On Wed, Aug 5, 2015 at 9:29 PM, John Aubrey <[email protected]> > wrote: > > The sysprep logs show no errors. The smsts log (on the C drive) stops > when the PC reboots and everything is good there. I can’t get a log from > when it’s booted to PE. I can browse to it in command line, but can’t open > it since it’s in use. The PC just turns off, so it doesn’t fail to the > point I can even get to the log. What I do is build up a Win7 VM and once > it is all complete I boot off of a capture disc made in SCCM. Once it > autoruns I put in file name, locations and what not and hit go. Looks like > it wants to start scanning the hard drive once it gets to PE but no > progress is show and eventually just reboots. > > > > *From:* [email protected] [mailto: > [email protected]] *On Behalf Of *Niall Brady > *Sent:* Wednesday, August 5, 2015 3:17 PM > *To:* [email protected] > *Subject:* Re: [mssms] My capture is broken > > > > 'and then go to capture' > > how ? using capture media or ? did you look at what the smsts.log file > said or for that matter the logs here > > *C:\Windows\System32\Sysprep\Panther* > > - *setupact.log* > - *setuperr.log* > > > > > > On Wed, Aug 5, 2015 at 8:53 PM, John Aubrey <[email protected]> > wrote: > > Sometime in the past couple months (I’m pointing at you R2 SP1?) I can’t > capture any images. It syspreps and boots into PE and sits a bit and then > reboots without capturing anything. I have a 1kb file in the share and a > PC that boots back up to a OOB experience. Anyone come across something > like this? I don’t use a build and capture TS, I build it by hand and then > go to capture. > > > > Help! > > --John > > > > > > > > > > > > > > > > > > > > This e-mail and any files transmitted with it are property of Indiana > Members Credit Union, are confidential, and are intended solely for the use > of the individual or entity to whom this e-mail is addressed. If you are > not one of the named recipient(s) or otherwise have reason to believe that > you have received this message in error, please notify the sender and > delete this message immediately from your computer. Any other use, > retention, dissemination, forwarding, printing, or copying of this email is > strictly prohibited. > > Please consider the environment before printing this email. > >
