I go them copied out. Issue right now is that I don’t know when it is going to crash, and all the logs so far up until it reboots look good.
From: [email protected] [mailto:[email protected]] On Behalf Of CESAR.ABREG0 . Sent: Thursday, August 6, 2015 9:02 AM To: [email protected] Subject: Re: [mssms] My capture is broken I've never seen this logs return "in use message" You should be able to copy them without any problem but are in a temp folder at this stage. On Thu, Aug 6, 2015, 8:05 AM David McSpadden <[email protected]<mailto:[email protected]>> wrote: If it stuck in use. Open it. Copy and paste to a new notepad. Save to USB key or map a drive back to your own pc and save it to your own pc. From: [email protected]<mailto:[email protected]> [mailto:[email protected]<mailto:[email protected]>] On Behalf Of Niall Brady Sent: Thursday, August 6, 2015 7:53 AM To: [email protected]<mailto:[email protected]> Subject: Re: [mssms] My capture is broken what says it's in use ? press f8, browse to x:\windows\temp\smstslog\ and copy the smsts*.log files in there to a usb key or elsewhere On Thu, Aug 6, 2015 at 1:33 PM, John Aubrey <[email protected]<mailto:[email protected]>> wrote: It says it’s in use. Typically I can grab it after it fails, but it never fails, it just reboots. From: [email protected]<mailto:[email protected]> [mailto:[email protected]<mailto:[email protected]>] On Behalf Of Niall Brady Sent: Thursday, August 6, 2015 12:58 AM To: [email protected]<mailto:[email protected]> Subject: Re: [mssms] My capture is broken when it's in Windows PE, can you grab the smsts.log file then, (press f8) and attach it here On Wed, Aug 5, 2015 at 9:29 PM, John Aubrey <[email protected]<mailto:[email protected]>> wrote: The sysprep logs show no errors. The smsts log (on the C drive) stops when the PC reboots and everything is good there. I can’t get a log from when it’s booted to PE. I can browse to it in command line, but can’t open it since it’s in use. The PC just turns off, so it doesn’t fail to the point I can even get to the log. What I do is build up a Win7 VM and once it is all complete I boot off of a capture disc made in SCCM. Once it autoruns I put in file name, locations and what not and hit go. Looks like it wants to start scanning the hard drive once it gets to PE but no progress is show and eventually just reboots. From: [email protected]<mailto:[email protected]> [mailto:[email protected]<mailto:[email protected]>] On Behalf Of Niall Brady Sent: Wednesday, August 5, 2015 3:17 PM To: [email protected]<mailto:[email protected]> Subject: Re: [mssms] My capture is broken 'and then go to capture' how ? using capture media or ? did you look at what the smsts.log file said or for that matter the logs here C:\Windows\System32\Sysprep\Panther * setupact.log * setuperr.log On Wed, Aug 5, 2015 at 8:53 PM, John Aubrey <[email protected]<mailto:[email protected]>> wrote: Sometime in the past couple months (I’m pointing at you R2 SP1?) I can’t capture any images. It syspreps and boots into PE and sits a bit and then reboots without capturing anything. I have a 1kb file in the share and a PC that boots back up to a OOB experience. Anyone come across something like this? I don’t use a build and capture TS, I build it by hand and then go to capture. Help! --John This e-mail and any files transmitted with it are property of Indiana Members Credit Union, are confidential, and are intended solely for the use of the individual or entity to whom this e-mail is addressed. If you are not one of the named recipient(s) or otherwise have reason to believe that you have received this message in error, please notify the sender and delete this message immediately from your computer. Any other use, retention, dissemination, forwarding, printing, or copying of this email is strictly prohibited. Please consider the environment before printing this email.
