That's correct.
________________________________
John Marcum
MCITP, MCTS, MCSA
Desktop Architect
Bradley Arant Boult Cummings LLP
________________________________
[H_Logo]
From: [email protected] [mailto:[email protected]] On
Behalf Of Bazaco, Hunter
Sent: Friday, October 23, 2015 8:52 AM
To: [email protected]
Subject: [MDT-OSD] RE: Dell Precision M3800 Joining Domain
The particular USB NIC that came with this M3800 is a realtek. Model #
dbjbcbc064. Looks like yours is a TrendNet device, correct? I looked up the
TU2-ET100 and that is what the results suggested.
Hunter Bazaco
OCIO-IS
Managed Desktop Systems Engineer
(843)792-7820 -Office
(843)670-3680 -Mobile
[email protected]<mailto:[email protected]>
From: [email protected]<mailto:[email protected]>
[mailto:[email protected]] On Behalf Of Marcum, John
Sent: Friday, October 23, 2015 9:34 AM
To: [email protected]<mailto:[email protected]>
Subject: [MDT-OSD] RE: Dell Precision M3800 Joining Domain
The one we are using also came with the 3800. Is yours not the same model? I
went to the manufacturer website to get the drivers not Dell BTW. Our image is
Win 7
________________________________
John Marcum
MCITP, MCTS, MCSA
Desktop Architect
Bradley Arant Boult Cummings LLP
________________________________
[H_Logo]
From: [email protected]<mailto:[email protected]>
[mailto:[email protected]] On Behalf Of Bazaco, Hunter
Sent: Friday, October 23, 2015 8:27 AM
To: [email protected]<mailto:[email protected]>
Subject: [MDT-OSD] RE: Dell Precision M3800 Joining Domain
Interesting. Thanks for the input. This further suggests that the particular
USB 3.0 NIC that comes with the M3800 we purchased might have issues
initializing properly.
Thanks to Kevin's input, I am currently reimaging and watching the
"setupapi.dev.log" to see if anything interesting reveals itself. I've also
tracked down a generic USB NIC to try next.
Thank you to everyone for the input, so far.
Hunter Bazaco
OCIO-IS
Managed Desktop Systems Engineer
(843)792-7820 -Office
(843)670-3680 -Mobile
[email protected]<mailto:[email protected]>
From: [email protected]<mailto:[email protected]>
[mailto:[email protected]] On Behalf Of Marcum, John
Sent: Friday, October 23, 2015 9:21 AM
To: [email protected]<mailto:[email protected]>
Subject: [MDT-OSD] RE: Dell Precision M3800 Joining Domain
I spoke too soon. The Tech working on the new M3800's we got said it did
complete successfully last night. All I did was add the The particular USB NIC
that came with this M3800 is a realtek. Model # dbjbcbc064.
driver to the driver package. I was also wrong about not being able to get the
driver injected in to PE. It was a different driver that was failing.
I was able to get the TU2-ET100 drivers by install it on a PC (any PC) and
copying the files from C:\Program Files (x86)\TU2-ET100
________________________________
John Marcum
MCITP, MCTS, MCSA
Desktop Architect
Bradley Arant Boult Cummings LLP
________________________________
[H_Logo]
From: [email protected]<mailto:[email protected]>
[mailto:[email protected]] On Behalf Of Kent, Mark
Sent: Friday, October 23, 2015 8:00 AM
To: [email protected]<mailto:[email protected]>
Subject: [MDT-OSD] RE: Dell Precision M3800 Joining Domain
For the most part, we have standardized on the Dell USB 3.0 NIC and the Surface
NIC. Works for the most part. We have not done an M3800 as we rarely have a
Precision workstation. Oh add to the confusing mess that sometimes you can
get different results depending on whether you use a 2.0 or 3.0 port.
Mark Kent (MCP)
Sr. Desktop Systems Engineer
Computing & Technology Services - SUNY Buffalo State
From: [email protected]<mailto:[email protected]>
[mailto:[email protected]] On Behalf Of Bazaco, Hunter
Sent: Thursday, October 22, 2015 4:58 PM
To: [email protected]<mailto:[email protected]>
Subject: [MDT-OSD] RE: Dell Precision M3800 Joining Domain
I'm starting to get that feeling. The only other USB NIC's that I have handy
are lenovo's and the bios on the M3800 seems to reject those immediately. Even
if I put the boot-image (to PXE boot) onto a usb stick with the lenovo driver.
I am thinking I might need to just find some more dell USB NIC's and try those
but this is going to end up being a mess if we decide to use these precision
laptops more frequently. I can't imagine telling our field engineers to just
"keep trying different usb NICS until one works".
Thank you for your help. Hopefully, we'll get a workaround.
Hunter Bazaco
OCIO-IS
Managed Desktop Systems Engineer
(843)792-7820 -Office
(843)670-3680 -Mobile
[email protected]<mailto:[email protected]>
From: [email protected]<mailto:[email protected]>
[mailto:[email protected]] On Behalf Of Kent, Mark
Sent: Thursday, October 22, 2015 4:49 PM
To: [email protected]<mailto:[email protected]>
Subject: [MDT-OSD] RE: Dell Precision M3800 Joining Domain
We have had that issue. We also have 3-4 different USB NIC's. Some models
just seem to act stupid with different adapters. One doesn't seem to work, we
plunk in a different one with a different mfgr NIC (many use the Axis NIC but
there are others out there). Yes, it's frustrating.
Mark Kent (MCP)
Sr. Desktop Systems Engineer
Computing & Technology Services - SUNY Buffalo State
From: [email protected]<mailto:[email protected]>
[mailto:[email protected]] On Behalf Of Bazaco, Hunter
Sent: Thursday, October 22, 2015 4:38 PM
To: [email protected]<mailto:[email protected]>
Subject: [MDT-OSD] RE: Dell Precision M3800 Joining Domain
We actually have done that and get an IP address both in WinPE and once it
reboots into windows. It seems that at some point, once it reboots into
windows, the usb adapter is literally not physically being seen by the laptop;
unless you physically remove and re-instert the dongle. By then, the damage is
done; the domain is not joined and the image does not complete properly.
Hunter Bazaco
OCIO-IS
Managed Desktop Systems Engineer
(843)792-7820 -Office
(843)670-3680 -Mobile
[email protected]<mailto:[email protected]>
From: [email protected]<mailto:[email protected]>
[mailto:[email protected]] On Behalf Of Kent, Mark
Sent: Thursday, October 22, 2015 4:33 PM
To: [email protected]<mailto:[email protected]>
Subject: [MDT-OSD] RE: Dell Precision M3800 Joining Domain
The driver needs to be in both your boot image and applied to your image during
the image processes.
Mark Kent (MCP)
Sr. Desktop Systems Engineer
Computing & Technology Services - SUNY Buffalo State
From: [email protected]<mailto:[email protected]>
[mailto:[email protected]] On Behalf Of Bazaco, Hunter
Sent: Thursday, October 22, 2015 4:23 PM
To: [email protected]<mailto:[email protected]>
Subject: [MDT-OSD] Dell Precision M3800 Joining Domain
I am having issues getting a Dell Precision M3800 Laptop to join the domain
when imaging. I am using the usb 3.0 ethernet adapter dongle that came with
the laptop. Has anyone else had any issues with this?
Thank you,
Hunter Bazaco
OCIO-IS
Managed Desktop Systems Engineer
(843)792-7820 -Office
(843)670-3680 -Mobile
[email protected]<mailto:[email protected]>
________________________________
Confidentiality Notice: This e-mail is from a law firm and may be protected by
the attorney-client or work product privileges. If you have received this
message in error, please notify the sender by replying to this e-mail and then
delete it from your computer.
