Philip,

No, I'm running a Volvo MD2030 engine.

Thanks anyway.

Rit
  -----Original Message-----
  From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of Philip & Marilyn
  Sent: Monday, June 02, 2008 1:14 PM
  To: [email protected]
  Subject: Re: [Liveaboard] Fanbelt dust


  Are you using a single 3/8"  (3L) belt? One that also drives the fresh
water pump? If so that is the problem. Not enough belt wrap. If you are
running a Yanmar 2 or 3 gm series engine I have a solution that worked for
me.
  Philip

  At 03:03 PM 6/2/2008, you wrote:

    I've got a newer Balmar 100 amp alternator bolted onto a Volvo MD2030
and am getting a lot of rubber dust off the balmar pulley, which is getting
sucked into the alternator.

    Changed sheeves, belts match sheeves, spoke to both Balmar and Volvo, no
help there.

    Tried belt dressing, have backed off amp output down to 75 amps, still
getting dust.

    Any suggestions?

    Thanks in advance,

    Rit
    _______________________________________________
    Liveaboard mailing list
    [email protected]
    To adjust your membership settings over the web
http://www.liveaboardnow.org/mailman/listinfo/liveaboard
    To subscribe send an email to [EMAIL PROTECTED]

    To unsubscribe send an email to [EMAIL PROTECTED]
    The archives are at http://www.liveaboardnow.org/pipermail/liveaboard/

    To search the archives
http://www.mail-archive.com/[email protected]

    The Mailman Users Guide can be found here
http://www.gnu.org/software/mailman/mailman-member/index.html

  Philip & Marilyn Lange
     AE4OV & KD4JRC,
       ORYOKI
  Witness 35 Catamaran


_______________________________________________
Liveaboard mailing list
[email protected]
To adjust your membership settings over the web 
http://www.liveaboardnow.org/mailman/listinfo/liveaboard
To subscribe send an email to [EMAIL PROTECTED]

To unsubscribe send an email to [EMAIL PROTECTED]
The archives are at http://www.liveaboardnow.org/pipermail/liveaboard/

To search the archives http://www.mail-archive.com/[email protected]

The Mailman Users Guide can be found here 
http://www.gnu.org/software/mailman/mailman-member/index.html

Reply via email to