As I explained in my previous emails, the fuses for all the loads are at the distribution point where the offstickers soldered to the main busses terminate a few inches from the buss lines. The fuses are either the NAPA 8-fuse block or a terminal block with in-line fuses in the supply leads to each load.
You are the second person today who simply ignored my words. I don't understand why. The load fuses are all located right at the end of the offstickers. There is typically one pair of offstickers in each room or area in the boat. The device switches are usually on or near the devices or wherever the most convenient place may be. Norm S/V Bandersnatch Lying Julington Creek 30 07.695N 081 38.484W > [Original Message] > From: Philip McConnell <[EMAIL PROTECTED]> > To: <[email protected]> > Date: 7/22/2008 5:31:19 PM > Subject: Re: [Liveaboard] 12 VDC buss > > Norm, > > Do you try to group breakers and fuses? Like maybe having a small panel > in each cabin? If not, what system do you use for locating them so they > can easily be found in a pinch? > > Thanks, > > Philip McConnell > USSV Gryphon _______________________________________________ Liveaboard mailing list [email protected] To adjust your membership settings over the web http://www.liveaboardnow.org/mailman/listinfo/liveaboard To subscribe send an email to [EMAIL PROTECTED] To unsubscribe send an email to [EMAIL PROTECTED] The archives are at http://www.liveaboardnow.org/pipermail/liveaboard/ To search the archives http://www.mail-archive.com/[email protected] The Mailman Users Guide can be found here http://www.gnu.org/software/mailman/mailman-member/index.html
