Thanks for the info. I have to get a slight curve - about a 1 1/2" cord depth in the windows, (about 30x18) in the 3/8" plexi. Any ideas? -- S/V ORYOKI Philip & Marilyn Lange AE4OV KD4JRC Currently on the hill - Beaufort NC
"There's no point in making a plan if you're not going to pretend to follow it!" On Mon, 2012-04-23 at 17:51 -0400, Bob Johnson wrote: > I used 3m tape for boot stripe. I replaced the original 11 yr old tape > which took a lot of time to remove so I can attest to it's tenacity. > I'd never go back to painting. Phillip, I am replacing my salon > windows that are 3/8" x 20" by 50" using sika products. I can't seem > to locate the document explaining the step by step process but here is > a link to the product page > http://usa.sika.com/en/solutions_products/01/01a006/01a006sa03/01a006sa03100/01a006sa03104.html > Several other owners on the PDQ group have re-glazed their panels using > these products. You can get everything from Defender. > > Bob > PDQ 36 > Peace > > > > > > >
_______________________________________________ Liveaboard mailing list [email protected] To adjust your membership settings over the web http://liveaboardonline.com/mailman/listinfo/liveaboard To subscribe send an email to [email protected] To unsubscribe send an email to [email protected] The archives are at http://www.liveaboardonline.com/pipermail/liveaboard/ To search the archives http://www.mail-archive.com/[email protected] The Mailman Users Guide can be found here http://www.gnu.org/software/mailman/mailman-member/index.html
