Alexander E. Patrakov wrote: > lists wrote: >> Do I have to remaster the cd to enable support for the rt61pci module >> that is the driver for my network card? >> > There is no such driver on the CD. However, you can request its > inclusion in the r2030 (or so) CD, by providing the following information: > > 1) The output of "lspci && lspci -n" from the machine which has the > card, with the words "this is my card" appended to the proper line.
lspci: 00:00.0 Host Bridge Intel Corporation 430tx 82439tx MTXC revision 01 00:01.0 Bridge Intel Corporation 82371ab/eb/mb piix4 isa revision 01 00:01.1 ide nterface Intel corporation 82371ab/eb/mb piix4 ide revision 01 00:01.2 usb controller Intel Corporation 82371ab/eb/mb piix4 usb reviion 01 00:01.3 Bridge Intel Corporation 82371ab/eb/mb piix4 ACPI revision 01 00:02.0 VGA compatible controller Neomagic MN2160 Magicgraph 128XD 00:04.0 Cardbus Bridge Texas Instruments pci 1131 revision 01 00:04.1 Cardbus Bridge Texas Instruments pci 1131 revision 01 05:00.0 Network controller Ralink RT2561/RT61 802.11g pci <<this is the card lspci -n 00:00.0 0600: 8086:7100 00:01.0 0680: 8086:7110 00:01.1 0101: 8086:7111 00:01.2 0c03: 8086:7112 00:01.3 0680: 8086:7113 00:02.0 0300: 10c8:0004 00:04.0 0607: 104c:ac15 00:04.1 0607: 104c:ac15 05:00.0 0280: 1814:0301 << the network card Drivers sources: http://rt2x00.serialmonkey.com/wiki/index.php?title=Main_Page I have the daily cvs tarball from today, Tuesday August 14 and will build on the cd from it, if the sources aren't in the kernel sources as the development team for the chipset says they are. ;) boot parameters used to enable booting the cd: linux blacklist=piix, ata_piix, generic, ata_generic clock=pit load=legacy-pata pata -- http://linuxfromscratch.org/mailman/listinfo/livecd FAQ: http://www.linuxfromscratch.org/faq/ Unsubscribe: See the above information page
