Hi,
I'm having lots of 'Connection timed out' difficulties with our
hp network printers. I have upgraded the jetdirect cards to the
latest firmware (Firmware Rev. : G.08.32) and I am using
LPRng-3.7.4 and ifhp-3.4.4. The lprng is compiled with the
"--disable-gdbm" flag since I don't have gdbm installed.
Similar problems existed with earlier versions of the software
and earlier jetdirect card firmware.
I have the "Idle Timeout" on the jetdirect card set to just 20
seconds.
------------------------------------------------------------------
Here is the output of lpq -lll:
# lpq -Plwmoonlight -lll
Printer: lm is lwmoonlight@ballast
Printer: lm@ballast(originally lwmoonlight) 'lwmoonlight'
Queue: no printable jobs in queue
Status: cannot open '198.128.225.170%9100' - 'Connection timed out', attempt 1,
sleeping 10 at 13:05:45.702
Status: cannot open '198.128.225.170%9100' - 'Connection timed out', attempt 2,
sleeping 20 at 13:06:05.703
Status: cannot open '198.128.225.170%9100' - 'Connection timed out', attempt 3,
sleeping 40 at 13:06:35.703
Status: subserver pid 4474 exit status 'JFAIL' at 13:07:15.706
Status: job 'cfA816sagramore.ucllnl.org', attempt 3, allowed 3 at 13:07:15.818
Status: send_failure_action 'JREMOVE' at 13:07:15.818
Status: job 'cfA816sagramore.ucllnl.org', removing job - status JREMOVE at
13:07:15.819
Status: removing job 'cfA816sagramore.ucllnl.org' - JREMOVE at 13:07:15.906
Filter_status: 62 percent done at 12:41:58.228
Filter_status: 100 percent done at 12:41:58.503
Filter_status: data sent at 12:41:58.504
Filter_status: sent job file at 12:41:58.504
Filter_status: getting end using 'pjl job/eoj' at 12:41:58.506
Filter_status: end of job detected at 12:42:16.112
Filter_status: pagecounter 0, pages 0 at 12:42:16.113
Filter_status: done at 12:42:16.134
------------------------------------------------------------------
Here is the printcap entry:
lm|lwmoonlight
:force_localhost@
:lp=lwmoonlight@ballast
lm|lwmoonlight
:server
:rw:sh:
:lp=198.128.225.170%9100
:sd=/var/spool/lpd/lwmoonlight
:ifhp=model=hp4000
:filter=/usr/local/libexec/filters/ifhp
Any ideas?
thanks,
Stuart
-----------------------------------------------------------------------------
YOU MUST BE A LIST MEMBER IN ORDER TO POST TO THE LPRNG MAILING LIST
The address you post from MUST be your subscription address
If you need help, send email to [EMAIL PROTECTED] (or lprng-requests
or lprng-digest-requests) with the word 'help' in the body. For the impatient,
to subscribe to a list with name LIST, send mail to [EMAIL PROTECTED]
with: | example:
subscribe LIST <mailaddr> | subscribe lprng-digest [EMAIL PROTECTED]
unsubscribe LIST <mailaddr> | unsubscribe lprng [EMAIL PROTECTED]
If you have major problems, send email to [EMAIL PROTECTED] with the word
LPRNGLIST in the SUBJECT line.
-----------------------------------------------------------------------------
