Here is my printcap entry for this printer: csdisp|Xerox 3450 D/N in CS, Dispatch:sh:sd=/var/spool/lpd/csdisp:lp=csdisp%9100:
Here is another entery in my Printcap file that works great: mhpnest|Xerox 2125 in MHP, nesting printer:sh:sd=/var/spool/lpd/mhpnest:lp=mhpnest%9100: As you can see, they are identical. One works and the other doesn't. And with csdisp, the print job sits in my local print queue. It doesn't even get into the print server's queue. For some reason this queue will not accept the job. It will if I do an lpr command on the server or if I print through Samba. But not using standard TCP/IP port. I tried the queue another way. This was an alternate queue I set up for this printer: csdisp1|Phaser 3450 DN in Customer Service, Dispatch:rm=csdisp:sh:sd=/var/spool/lpd/csdisp1:rp=lpd: That one should print to the printer's LPD port rather than port 9100. That one fails as well. Sam -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Van Sickler, Jim Sent: Monday, February 16, 2004 5:18 PM Subject: RE: LPRng: Xerox Phaser 3450 DN Could you post the printcap section for the 3450? Jim > -----Original Message----- > From: Sam Warren [mailto:[EMAIL PROTECTED] > Sent: Friday, February 13, 2004 1:25 PM > Subject: RE: LPRng: Xerox Phaser 3450 DN > > > No, I have plenty of printers working. They are set up just > as you say. I > use the same configuration as you show in Windows to connect > to this printer > and it doesn't work. > > -----Original Message----- > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On > Sent: Thursday, February 12, 2004 6:19 PM > Subject: RE: LPRng: Xerox Phaser 3450 DN > > > Sam, > > My Lexmark Optra S 1250 is set up as follows: > > Standard TCP/IP Port: > Port Name: LPRng's printcap entry name (e.g. "optra") Printer Name or > IP Address: LPRng servers' host name > Protocol: LPR > Queue Name: Same as Port Name > LPR Byte Counting Enabled: yes > SNMP Status Enabled: no > > Hope this helps, > Jim > > > -----Original Message----- > > From: Sam Warren [mailto:[EMAIL PROTECTED] > > Sent: Thursday, February 12, 2004 2:39 PM > > Subject: LPRng: Xerox Phaser 3450 DN > > > > I have a Xerox Phaser 3450 DN I just added to the network. It has a > > duplex unit (D). I am having a strange problem that has stumped me. > > Maybe someone > > has an idea. I can print to it from the server using the lpr > > command. I can > > print to it from clients using Samba. However, I cannot print > > to it using > > TCP/IP port configured to send lpr from Windows 2000 or XP. > > The print job > > shows up as error. I am using the postscript drivers from > > Xerox. I have > > LPRng 3.8.22-2. I have tried setting the printcap to print to > > the printers > > LPD port and port 9100. Neither works. I have nearly 150 > > queues on this > > server and they all work except this one. Does anyone have > > any ideas on > > this? Thanks! > > > > Sam Warren, Jr. ----------------------------------------------------------------------------- YOU MUST BE A LIST MEMBER IN ORDER TO POST TO THE LPRNG MAILING LIST The address you post from MUST be your subscription address If you need help, send email to [EMAIL PROTECTED] (or lprng-requests or lprng-digest-requests) with the word 'help' in the body. For the impatient, to subscribe to a list with name LIST, send mail to [EMAIL PROTECTED] with: | example: subscribe LIST <mailaddr> | subscribe lprng-digest [EMAIL PROTECTED] unsubscribe LIST <mailaddr> | unsubscribe lprng [EMAIL PROTECTED] If you have major problems, send email to [EMAIL PROTECTED] with the word LPRNGLIST in the SUBJECT line. -----------------------------------------------------------------------------
